Hello,
I purchased (from Moonraker UK) a FlightAware Pro Stick Plusv1.0 to built an additional Station.
If I connect the Prostick on my RPI-3B+ the Blue LED of the Stick is not illuminating and the Stick is not receiving anything.
If I connect my spare DVB-T+FM+DAB Stick the RPI it decodes Flights, also the FA Prostick from my Master station works on the new RPI.
Just in case I started from scratch and followed “How to Install dump1090-mutability_1.15~dev on RPi Last revision/update: January 19, 2019” from Step-1 including Step-7.
The new FlightAware Pro Stick Plusv1.0 (Build 12-2018) is still not working.
I am a absolute Beginner with the RPI, but I suspect that the delivered Stick is Faulty, or there is something in the settings that has changed.
Is there a Wizard out there that could help to determinate if the Stick is Faulty.
Best regards
Hardy