Hello IS IT possible to Install a ACARS and ADSB Receiver on one Raspberrypi? Using 2 dongels and an y Antenna cable?
Announcement
Collapse
No announcement yet.
ACARS und ADSB Receiver on one Raspberry pi
Collapse
X
-
Originally posted by OblivianShould be able to, Acars might be a possibility. It will load up the processing a bit
But the frequency is well out of the range of a tv antenna for ADSB (1090Mhz vs 400-500Mhz)
I've done both individually, but since you can speicify device index it should be possible for both.
Which Antenna you are using?
-
Originally posted by temp View PostHello IS IT possible to Install a ACARS and ADSB Receiver on one Raspberrypi? Using 2 dongels and an y Antenna cable?
/MLast edited by MrMac; 2018-01-30, 19:22.F-ESDF1, F-ESGG1, F-ESGP1, F-ESNK1, F-ESNV2, F-ESNV3 F-ESSL4, F-ESNZ7, F-LFMN3
T-ESNL1, T-ESNL2, T-ESGR15
P-ESIA, P-ESIB, P-ESGF, P-ESSN, P-EFMA
mrmac (a) fastest.cc
Comment
-
Originally posted by OblivianI get away with the included antenna due to proximity.
/MF-ESDF1, F-ESGG1, F-ESGP1, F-ESNK1, F-ESNV2, F-ESNV3 F-ESSL4, F-ESNZ7, F-LFMN3
T-ESNL1, T-ESNL2, T-ESGR15
P-ESIA, P-ESIB, P-ESGF, P-ESSN, P-EFMA
mrmac (a) fastest.cc
Comment
-
Originally posted by OblivianOh I see. I consider the actual stick a USB stick not a TV stick... Was calling my antenna that come with it the TV stick (antenna)
I didn't understand your talk about a stick, and I wasn't replying to it either. I have clarified now that my first post was an answer to the OP's question about using a Y cable, which will not work well.
/MF-ESDF1, F-ESGG1, F-ESGP1, F-ESNK1, F-ESNV2, F-ESNV3 F-ESSL4, F-ESNZ7, F-LFMN3
T-ESNL1, T-ESNL2, T-ESGR15
P-ESIA, P-ESIB, P-ESGF, P-ESSN, P-EFMA
mrmac (a) fastest.cc
Comment
Comment