Originally posted by KriVa
View Post
Announcement
Collapse
No announcement yet.
RPi + SBS-3
Collapse
X
-
Thanks for that suggestion. I haven't had the time to try it just yet, but I will be doing so tonight.
I'll let you know if and how it works.
Leave a comment:
-
Dump1090 OS only called for certain extent receiver types.
Can you try and adjust the port num to 30006 for me and test... That is meant to be the unencrypted SBS output
Sent from my GT-I9300 using Tapatalk
Leave a comment:
-
RPi + SBS-3
Hi,
Since yesterday, I'm trying to run a new Raspberry Pi (model 3) together with an SBS-3 station over Ethernet. The station seems to be connecting OK, but no aircraft seem to be received by the station when I connect to localhost:8754.
Also, when I monitor the currently active processes, dump1090 does not seem to be running. I reckon dump1090 should be running, or am I wrong here?
When I run the fr24feed command "sudo fr24feed start", after a while, I get a loop of these messages:
Code:2016-04-11 16:22:57 | [feed][n]ping 6 2016-04-11 16:22:58 | [feed][n]syncing stream: 1 2016-04-11 16:23:27 | [feed][n]ping 7 2016-04-11 16:23:28 | [feed][n]syncing stream: 1 2016-04-11 16:23:51 | [reader][i]Connection terminated 2016-04-11 16:23:56 | [reader][i]Connecting to SBS3 receiver on 192.168.1.140:10001 2016-04-11 16:23:56 | [reader][i]Connected to the receiver, authenticating 2016-04-11 16:23:56 | [reader][e]Authentication failed, please make sure the specified device is a SBSX-TCP receiver 2016-04-11 16:23:57 | [feed][n]ping 8 2016-04-11 16:23:58 | [feed][n]syncing stream: 1 2016-04-11 16:24:01 | [reader][i]Connecting to SBS3 receiver on 192.168.1.140:10001 2016-04-11 16:24:01 | [reader][i]Connected to the receiver, authenticating 2016-04-11 16:24:02 | [reader][e]Authentication failed, please make sure the specified device is a SBSX-TCP receiver 2016-04-11 16:24:07 | [reader][i]Connecting to SBS3 receiver on 192.168.1.140:10001 2016-04-11 16:24:07 | [reader][i]Connected to the receiver, authenticating 2016-04-11 16:24:07 | [reader][e]Authentication failed, please make sure the specified device is a SBSX-TCP receiver
Mainly, my two problems are the connection seemingly dropping out, and (I think) dump1090 not running.
Thanks,
ThomasTags: None
Leave a comment: