Announcement

Collapse
No announcement yet.

Dump1090 and Basestation

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • NToombes
    replied
    Originally posted by Anmer View Post
    Thanks. Do you specify a data format in MSM2 and if so, which one?
    Evening.
    I was under the impression from the instructions that I don't need to specify a data format to read data directly from my SBS1-er.
    The command line is as follows...

    "C:\Aviation Tracking Applications\ModeSMixer2\modesmixer2.exe" --inConnect 192.168.0.170:10001 --web 8888 --location 51.2xx:-1.1xx"

    My ultimate wish to read directly the SBS1-er output into ModeSmixer2 from port 10001 and then output this identical data on port 10001 (need to add the --outServer sbs10001:10001 switch in the command line later) on my Windows PC. I can then use Base station to feel my 360Radar & Freedar feeds and also a VRS server
    Aslo, I can feed FR24 thats currently running a a Raspberry pi with their own build of sharing software. This again, on its own reads data from port 10001 of my SBS. its currently removed from the network whilst I carry out these tests.

    Neil

    Leave a comment:


  • Anmer
    replied
    Thanks. Do you specify a data format in MSM2 and if so, which one?

    Leave a comment:


  • NToombes
    replied
    Originally posted by Anmer View Post
    Do you have BaseStation running at the same time as ModeSMixer2?

    If you have, it's "grabbing" the SBS data on 192.168.0.170:10001.
    Hiya
    Nope, understand you can only have one connection into 10001 at a time. Just proving the datastream is there on 10001 with basestation. I shut basestation down and then run ModeSMixer2 and it says connected but never detects a data stream.

    Neil

    Leave a comment:


  • Anmer
    replied
    Do you have BaseStation running at the same time as ModeSMixer2?

    If you have, it's "grabbing" the SBS data on 192.168.0.170:10001.

    Leave a comment:


  • NToombes
    replied
    Hi
    OK, wonder if anyone can help me with ModeSMixer2.
    So, i can connect my Basestation directly over the network via the IP of 192.168.0.170 on port 10001 and all works fine.
    Now i wish to run several applications to share my data between several organisations i need to use ModeSmixer2.
    I have installed this OK. I have played with the command line and have --inConnect 192.168.0.170:10001 command line in there.
    So, ModeSMixer2 starts up and says Connected to 192.168.0.170:10001 etc. It doesnt say anything else. If I open the web server (yes I have done the --8888 switc option) the chat pages open but no data appears ever, nothing.
    if i also add the outserver sbs10001:10001 which i believe then should let me basestation connect to the ModeSmixer2 output on 1001 (after changing the basestation ip to 127.0.0.1. Basestation says its connected and ModeSMixer screen shows the connection but no aircraft shown. So, to me it looks like I am physically connecting but not passing any data. Any ideas?

    Neil

    Leave a comment:


  • rueckwaertsflieger
    replied
    Originally posted by F-EGLF1 View Post
    Wolfram
    Are you aware that an OGN reciever not only feeds the Open Glider Network but also feeds the data to FR24 so you can see both gliders and ADSB...
    It is very easy to setup an OGN receiver ...get you up and running in minutes .
    Ben.
    Ah yes, I see,

    Ben, you are totally right with exception of the minutes to set up a receiver. Yielding a perfect installation it takes hours, even with the perfect preperations of OGN. But there are severe restrictions with the big approach of FR24. Just to name a few:

    There has been ample discussion about property rights on personal tracking data. Thus, private pilots quite often use the "do not track flag", meaning, there will be no forwarding to FR24 or even OGN. With a local display especially without storing tracking data, everything ist fine. You might display all traffic, essential for an ground virtual radar.

    I target an application for gliding airfiled manager. Be assured, there are airfields in backcountry without decent network to the internet access. Thus, a networked solution is not valuable.

    After having tested OGN receiver with a local display I know, the local has much more frequent fixes giving you a much richer situation awareness than the big FR24 approach. And there are many more aspects.

    On bottom line: FR24 is the planespotting spectator's solution, not an airfield manager solution. I target an airfield manager virtual radar "AMVR" app, with many more features, as is weather, especially lightning overlay on map, local wind, etc.

    Thank you,
    Wolfram

    Leave a comment:


  • F-EGLF1
    replied
    Originally posted by rueckwaertsflieger View Post
    This is a question to the developer sergsero:

    As a glider pilot I act as a manager for our gliding airfield from time to time. I am in search for a virtual radar showing both, all the commercial and GA traffic in one application, say on one virtual radar screen. Gliders typically use Flarm rather than ADS-B transponders so you have to deal with it. From the open glider network initiative there is a Flarm decoder existing, that outputs the glider' (or Flarm target's) positions via APRS. Unfortunately there is no way between APRS and SBS format as far as I know.

    Having built so many ADS-related protocols and even an AIS receiver as well as ADS receiver:
    Is there a chance you will create such an interface?

    IMHO best was to create another input to modesdeco or modesmixer for APRS/Flarm signals. So one could watch all the traffic on one screen.

    Thank you,
    Wolfram (Rueckwaertsflieger)
    Wolfram
    Are you aware that an OGN reciever not only feeds the Open Glider Network but also feeds the data to FR24 so you can see both gliders and ADSB on the one screen, the only thing is that the gliders must be registered on the OGN database otherwise the data is not displayed on FR24.
    It is very easy to setup an OGN reciever using a Raspberry pi and pre built images with a web configuration can be downloaded from OGN to get you up and running in minutes .
    Ben.

    Leave a comment:


  • rueckwaertsflieger
    replied
    This is a question to the developer sergsero:

    As a glider pilot I act as a manager for our gliding airfield from time to time. I am in search for a virtual radar showing both, all the commercial and GA traffic in one application, say on one virtual radar screen. Gliders typically use Flarm rather than ADS-B transponders so you have to deal with it. From the open glider network initiative there is a Flarm decoder existing, that outputs the glider' (or Flarm target's) positions via APRS. Unfortunately there is no way between APRS and SBS format as far as I know.

    Having built so many ADS-related protocols and even an AIS receiver as well as ADS receiver:
    Is there a chance you will create such an interface?

    IMHO best was to create another input to modesdeco or modesmixer for APRS/Flarm signals. So one could watch all the traffic on one screen.

    Thank you,
    Wolfram (Rueckwaertsflieger)

    Leave a comment:


  • szarka
    replied
    Sergsero:

    First, thank you so very much for all your hard work on these two programs and for making them freely available to everyone. They both work great. I am amazed at how much functionality you are able to build into ModeSMixer with only a 2.4 MB executable. The transcoding features are very useful.

    I am using the new v.20150616 of modeSMixer2 on Windows 7 x32 in a virtual machine. The only "improvements" I could possibly recommend are error handling. For example if there is a stray " (double quote) in the path to the database file it will crash the program on start up. If a port such as 30005 is already in use by the Basestation program and ModeSMixer2 has not yet been started, when you attempt to start it, it will crash ModeSMixer2. Of course, the easy answer to this is simply to start ModeSMixer2 first, then Basestation. I only mention this since you're asking people how the program is working for them.

    This is my startup batch file:

    modesmixer2.exe --inConnect 192.168.1.25:30005 --inConnect X.X.X.X:30334 --web 8888 --db C:\SDR\ModeSMixer\basestation.sqb --frdb C:\SDR\ModeSMixer\flightroute-icao.sqb --silhouettes "C:\Users\szarka\AppData\Local\VirtualStore\Progra m Files\Kinetic\BaseStation\OperatorFlags" --pictures "C:\Users\szarka\AppData\Local\VirtualStore\Progra m Files\Kinetic\BaseStation\JPGPhotos" --location 44.xxxxx:-68.xxxxx --localtime --outServer sbs10001:10001 --disable-web-log

    For future program enhancements it would perhaps be nice to be able to enable "trails" for all aircraft on the map and to have a total count of all aircraft on the Map and Flights page.

    Thanks again and хорошо!

    --Szarka
    Last edited by szarka; 2015-06-22, 04:26.

    Leave a comment:


  • sergsero
    replied
    Test version of ModeSMixer2 20150628

    + fixed bug in CPR decoder's filter
    + used the release version v=3.20 of Google Maps API
    + added option --web-auth <arg> Enable web auth usernameassword (default: off)
    + added option --filter-ic Enable Interrogator Code filter (default: off)
    + added option --metric Enable metric system of distance measurement
    + added ability to select rows for aircraft's label on the map
    + added ability to display METAR data (with decoding them by pushing on the string) for one airport
    + table on Google map is draggable. Move it by clicking on it with the mouse and dragging it anywhere within the viewport
    + added option --location <arg> for one point with LAT:LON
    + added option --filter-ic Enable Interrogator Code filter (default: off)
    + added option --disable-web-log suppresses console messages on WEB page Log

    If you see on the page Map that all aircraft are being plotted in the top-left corner and the Google map does not load, then you need to do bypass your cache in browser.

    Bypassing your cache means forcing your web browser to re-download a web page from scratch, which can often solve website display glitches. It is also required after installing user scripts. Bypassing your cache is simple, safe, and causes no permanent changes.

    When you are on the page "Map":
    In most Windows and Linux browsers: Hold down Ctrl and press F5.
    In Apple Safari: Hold down ⇧ Shift and click the Reload toolbar button.
    Or use menu: Control+Shift+Del
    Regards,
    sergsero
    Attached Files
    Last edited by sergsero; 2015-07-28, 12:30.

    Leave a comment:


  • sergsero
    replied
    Test version of ModeSDeco2 v.20150603 with AirSpy receiver support in Intel x86.

    + added support for AirSpy receivers (Firmware Version: Base AirSpy NOS v1.0.0-rc4-0-g23d1436 2015-03-22 and special AirSpy NOS v1.0.0-rc3-2-g23d1436-dirty 2015-03-22) with Intel x86 CPU (Windows, Linux, OS X)
    + added option --airspy-sr <arg> Set AirSpy sample rate (default: max available). Example: 4, 6, or 10 (for use with special fw AirSpy NOS v1.0.0-rc3-2-g23d1436-dirty 2015-03-22 only)
    + added option --avrmlatas <arg> Enable AVR MLAT AirSpy format (*<frame>;<timestamp: 4 bytes>;<samples_per_pulse: 1 byte>;\r\n) output listen port (defaultff)
    + added option --web-auth <arg> Enable web auth usernameassword (default: off)
    + added option --filter-ic Enable Interrogator Code filter (default: off)
    + added option --metric Enable metric system of distance measurement
    + added ability to select rows for aircraft's label on the map
    + added ability to display METAR data (with decoding them by pushing on the string) for one airport
    + added ability to select the map style

    Regards,
    sergsero
    Last edited by sergsero; 2015-07-28, 12:31.

    Leave a comment:


  • Tcheno
    replied
    sergsero

    I've setup my Asus RT-N16 router running OpenWRT and Dump1009 and would love to have Modemixer on it in order to feed FlightRadar24 and FlightAware.
    Can you please compile it for the BCM47XX?
    You can find my dump1090 instance at tcheno.sytes.net
    Last edited by Tcheno; 2015-05-28, 22:19.

    Leave a comment:


  • sergsero
    replied
    Hello,

    In messages #6 and #7 of this thread were updated respectively the version 20150323 ModeSMixer2 and 20150321 ModeSDeco2 with WEB interface.

    Thanks,
    sergsero

    Leave a comment:


  • sergsero
    replied
    Hello,



    Thanks,
    sergsero
    Attached Files
    Last edited by sergsero; 2015-03-22, 06:36.

    Leave a comment:


  • kucengemok
    replied
    Thanks for such info.

    Leave a comment:

Working...
X