fr24feed test build for SBSX receivers, RPI only!

[Khan]

Ok Khan and thank you for your answer.
You tell me: "select the correct receiver type while selecting your receiver (Step 4.1)"
From what installation procedure ???
Because I am a little lost in the correct RPI installation procedure to use.
Thank you.
Jacky
EDIT: is this image for RPI valid ??? I can not post link yet, so not easy ... [fr24-raspberry-pi-latest.img]

NO, that's with the old version of the feeder software which doesn't work with SBS receivers. But you can use that and install the new version onto it. But right now if you were to download the image then it already have the feeder software installed and all you need to do is run this command to start setup process on your PI: sudo fr24feed --signup.

[JackyNiew]

It's works fine for me. The reason why I posted it here was for others to test it out to see if it's giving anyone any problems. So far haven't seen any replies so I assume it must be working. Either that or no one has tried it yet. Will give it a few more days and then release it.

I checked it on Jessie as well and it works. I would suggest to wait till it's released on to the site. Setup is the same as any other receiver. All you have to do is select the correct receiver type while selecting your receiver (Step 4.1)

Ok Khan and thank you for your answer.
You tell me: "select the correct receiver type while selecting your receiver (Step 4.1)"
From what installation procedure ???
Because I am a little lost in the correct RPI installation procedure to use.
Thank you.
Jacky
EDIT: is this image for RPI valid ??? I can not post link yet, so not easy ... [fr24-raspberry-pi-latest.img]

[Khan]

Hello,

I received the USB key (Flightaware-Plus with filter)
So I am ready to build my receiver from a Raspberry pi 2.
But I am a little lost on the right file to use for FR24 - RPI.
I do not see any feedback on the RPI test file of our friend "Khan".
I would like to stay on the Jessie Raspbian OS.
Is there a clear procedure to install all that is needed, and correctly start my receiver FR24-RPI is launch my share with FR24 ???

Thanks for an answer.
Jacky

It's works fine for me. The reason why I posted it here was for others to test it out to see if it's giving anyone any problems. So far haven't seen any replies so I assume it must be working. Either that or no one has tried it yet. Will give it a few more days and then release it.

I checked it on Jessie as well and it works. I would suggest to wait till it's released on to the site. Setup is the same as any other receiver. All you have to do is select the correct receiver type while selecting your receiver (Step 4.1)

[JackyNiew]

Hello,
I expect the Windows SBSx version to test it, and give the results of this test.
I hope this new Windows version will come out very fast.
I will also build a receiver from an RPI, but I do not have all the hardware yet. It is for this reason that I can not yet test this new version RPI.

Best regards,
Jacky

Hello,

I received the USB key (Flightaware-Plus with filter)
So I am ready to build my receiver from a Raspberry pi 2.
But I am a little lost on the right file to use for FR24 - RPI.
I do not see any feedback on the RPI test file of our friend "Khan".
I would like to stay on the Jessie Raspbian OS.
Is there a clear procedure to install all that is needed, and correctly start my receiver FR24-RPI is launch my share with FR24 ???

Thanks for an answer.
Jacky

[JackyNiew]

Those who have raspberry pis and sbsx receivers, please test it out and let us know if everything is OK so that we can release it. Windows build not available yet. as soon as the windows built is available ill be happy to test it.

Donnie

Hello,
I expect the Windows SBSx version to test it, and give the results of this test.
I hope this new Windows version will come out very fast.
I will also build a receiver from an RPI, but I do not have all the hardware yet. It is for this reason that I can not yet test this new version RPI.

Best regards,
Jacky

[b772er]

Those who have raspberry pis and sbsx receivers, please test it out and let us know if everything is OK so that we can release it. Windows build not available yet. as soon as the windows built is available ill be happy to test it.

Donnie

[Khan]

Hi,
I confirm that the current version for Windows 1.0.18-9 and SBS-1 absolutely does not work.
I spent 2 days testing everything, to understand that FR24feed was bugged.
I hope the Windows version will soon be available.

Best regards.
Jacky

Yes, that is correct. The current one doesn't work, that's why this new test build to make sure it's working properly for everyone. If it's working for people then will have windows version done as well.

[JackyNiew]

Hi,
I confirm that the current version for Windows 1.0.18-9 and SBS-1 absolutely does not work.
I spent 2 days testing everything, to understand that FR24feed was bugged.
I hope the Windows version will soon be available.

Best regards.
Jacky

[Khan]

Hi,

We have a test build that should now work properly with SBSX receivers which the current version doesn't. Those who have raspberry pis and sbsx receivers, please test it out and let us know if everything is OK so that we can release it. Windows build not available yet.

.deb: https://drive.google.com/file/d/0B2K...JrRnVFdkE/view

.tgz: https://drive.google.com/file/d/0B2K...lXclB6YUE/view