Announcement

Collapse
No announcement yet.

Fr24 Receiver , to be linked with Planeplotter ...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • North Borneo Radar
    replied
    Originally posted by usernil View Post
    I am just getting data from an AT75 ..iT'S WORKING NOW....Thanks a Ton Sir ......
    Great... you are welcome.

    Leave a comment:


  • usernil
    replied
    I am just getting data from an AT75 ..iT'S WORKING NOW....Thanks a Ton Sir ......

    Leave a comment:


  • North Borneo Radar
    replied
    Originally posted by usernil View Post
    I think i just sort it out...I am not getting any error message ...Everything has been done as per instructed ...I am waiting for Air traffic to confirm if it's really set up....I will keep you posted & many thanks once again....
    Ok, good. You can always type 'a' in PP to see whether you are seeing aircrafts (positionless), then it should be working. Anyway I am sure you know that. Enjoy!

    Leave a comment:


  • usernil
    replied
    I think i just sort it out...I am not getting any error message ...Everything has been done as per instructed ...I am waiting for Air traffic to confirm if it's really set up....I will keep you posted & many thanks once again....

    Leave a comment:


  • North Borneo Radar
    replied
    Originally posted by usernil View Post
    I changed it as you said & still , the same output ....Nothing shown...Here is a screenshot of the settings...[ATTACH=CONFIG]4544[/ATTACH]
    Ah, I see.

    2 things:

    1) Why is radarbox TCP chosen? Please scroll down to Beast Receiver TCP.

    2) The TCP/IP server for that I/O settings should be 30003. Just like the previous image I uploaded.

    Port 30334 should be entered at another window. here is the print screen:

    TCP IP PP.jpg

    Click Setup TCP/IP Client.

    Then you will go into here:

    TCP IP PP2.jpg

    Here you insert your IP address of your FR24 receiver and port number 30334. i.e 192.168.x.x:30334

    Is that Ok?

    This is not directed to you usernil, but we long standing forum users know who this message is directed to:

    We are only troubleshooting matters for PP. Please do not use this for your personal vendetta of that company here. Thank you in advance.
    Last edited by North Borneo Radar; 2014-08-03, 06:16.

    Leave a comment:


  • usernil
    replied
    I changed it as you said & still , the same output ....Nothing shown...Here is a screenshot of the settings...Untitled.jpg

    Leave a comment:


  • North Borneo Radar
    replied
    Originally posted by usernil View Post
    @North Borneo Radar & F-EGLF1 , Thanks for the Informations ...But can't make it through ....No data Is being received on PP ....I will stick Scope ...It's more easy to configure .....
    Sorry my tips didn't help.

    What port did you use? 30334 is the one to go for as when I used BS 30003 I also didn't see any traffic.

    Leave a comment:


  • usernil
    replied
    @North Borneo Radar & F-EGLF1 , Thanks for the Informations ...But can't make it through ....No data Is being received on PP ....I will stick Scope ...It's more easy to configure .....

    Leave a comment:


  • F-EGLF1
    replied
    Interestingly enough on the PP forum last week someone was trying to set up a FR24 box to feed PP, I have pasted the conversation below (with some info redacted to prevent embarrassment)
    There was a followup email confirming that it was indeed a FR24 box..

    QUOTE

    Is this an FR24 Radarcape Xxxxxxx ?

    The data you are sending has incorrect time tags.

    Regards

    John

    PlanePlotter Support
    http://www.coaa.co.uk/planeplotter.htm

    ----- Original Message -----
    From: "xxxxxxxxx@gmail.com [planeplotter]" <planeplotter@yahoogroups.com>
    To: <planeplotter@yahoogroups.com>
    Sent: Wednesday, July 30, 2014 5:02 PM
    Subject: Re: [planeplotter] Sharer 'xx' requests ground Station Validation

    > Hi John,
    > only PP is connected over network to Radarcape receiver, no other
    > software.
    >
    > Regards,
    > Xxxxxx

    (Followup post)

    Thanks.

    Unfortunately that receiver is locked into FR24 and is unable to provide raw
    data as a ground station

    Regards

    John

    PlanePlotter Support
    http://www.coaa.co.uk/planeplotter.htm

    ----- Original Message -----
    From: "xxxxxxxxx@gmail.com [planeplotter]" <planeplotter@yahoogroups.com>
    To: <planeplotter@yahoogroups.com>
    Sent: Wednesday, July 30, 2014 9:11 PM
    Subject: Re: [planeplotter] Sharer 'xx' requests ground Station Validation

    > Yes, you are right, it is FR24 receiver
    Last edited by F-EGLF1; 2014-08-02, 11:12. Reason: Added second post

    Leave a comment:


  • North Borneo Radar
    replied
    Hello usernil,

    I attach a print screen to show you what it should look like.

    IO PP.jpg

    Is that ok? Please click on image to enlarge image.

    It is at options>I/O settings.

    Leave a comment:


  • usernil
    replied
    Thanks everyone...I can confirm that using Plane plotter is for my private Use.. & @ North Borneo Radar , Beast TCP is not listed in IO settings ...Can we use Teamviewer to solve this for me ?

    Leave a comment:


  • North Borneo Radar
    replied
    Originally posted by usernil View Post
    Anyone here could help me set up planeplotter with FR24 receiver ....I am using Paid Version....
    Erm... the standard answer is contact support@fr24.com

    but I also got what you got... so here is a bit of tips:

    Get your FR24 receiver IP address. You will need to know that (easier if you set it to a fixed IP which you can do from the status page).

    Find out which port you want to use from the FR24 receiver status page (I use RAW). Write both of them down if you can't remember them.

    Go to PP, make sure the IO settings is Beast TCP, highlighted.

    After that go to Options>mode s receiver>beast receiver>set up TCP/IP client>key in your FR24 receiver IP address& port no: ie. 192.168.x.x:xxxxx

    Press the green button to start processing. If all is well aircrafts will show on PP.

    Obviously... sharing is disabled.

    Hope this helps.
    Last edited by North Borneo Radar; 2014-08-02, 01:27. Reason: typo

    Leave a comment:


  • SoCalBrian
    replied
    You can link the FR24 box receiver to the Planeplotter software.
    You just can't upload the FR24 box receiver data to the Planeplotter Network. That option needs to be unchecked, turned off in the Planeplotter settings.
    Last edited by SoCalBrian; 2014-08-01, 20:02.

    Leave a comment:


  • RAFF
    replied
    This is what is stated elsewhere on the site regards sharing:

    "Share your data using PlanePlotter
    If you have an ADS-B receiver and you are using PlanePlotter, you can use PlanePlotter to feed your data into Flightradar24. Please note, we are NOT able to give you access to Flightradar24 Premium when feeding data via PlanePlotter. This is because we don't know who is feeding what when you go through PlanePlotter".

    Leave a comment:


  • peterhr
    replied
    Originally posted by usernil View Post
    Anyone here could help me set up planeplotter with FR24 receiver ....I am using Paid Version....
    is that permitted, or is it only permitted if you don't share the data???

    Leave a comment:

Working...
X