fr24 receiver & planeplotter

[Headancer]

Do we know when MLAT images will start to trace on FR24 in UK.

[satcom]

Satcom, does PP plan to introduce GPS-sync mlat?

PP has had the facility to synch to GPS for a couple of years and a number of GS use the system.

In addition GS location is closely monitored and PC clocks are kept correct using ntp.

By doing this we produce well over 200,000 mlats every 24 hours and using our special monitoring features
the overall quality of mlats is excellent

[nakos]

Satcom, does PP plan to introduce GPS-sync mlat?

[satcom]

i tried many times and i think it's not possibles with the free receiver

I'm sure that support will be able to explain.

I have also been asked the same question . As far as I know you can't feed PP from the free receivers.
These receivers are expensive bits of kit and dedicated to feeding FR24 . They were supplied free , for this purpose so you
can understand why they are locked into FR24 [ apologies if I'm incorrect on this ]

However dont let this put you off using PP as a standalone system alongside FR24...this way you'll be able to monitor the ever
expanding PP Mlat network as a subscribing MU whilst still enjoying FR24.
There were over 217,000 mlat fixes on PP yesterday , once the FR24 mlat system goes live you will be able to enjoy the best of both worlds.

[hakim0271]

managed to get some where , have to set as SBS1/TCP Kinetics , set ip then in I/O settings select it from the list i think its 2nd from top of ADS-B

i tried many times and i think it's not possibles with the free receiver

[jawivana]

managed to get some where , have to set as SBS1/TCP Kinetics , set ip then in I/O settings select it from the list i think its 2nd from top of ADS-B

[jawivana]

done still no reply yet .
Thanks

[Mike]

As I posted before, please contact support@fr24.com for questions or issues with the FR24 Free box.

[jawivana]

if there is a possibility of using planeplotter to track FR24 box information please share how.
Thanks

[hakim0271]

Try connecting by using the device IP address and port 30003

yes i did so but in vain

[SoCalBrian]

Try connecting by using the device IP address and port 30003

[Mike]

please contact support@fr24.com

[hakim0271]

who can help me to configure planeplotter with flightradar24 rceiver (free edition)