Announcement

Collapse
No announcement yet.

Planeplotter won't connect to RTL1090

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Oblivian
    replied
    Odd. It increments that number based on how many devices it detects. So for some reason thinks there is 2.

    Sent from my EML-L09 using Tapatalk

    Leave a comment:


  • n37077
    replied
    Thanks for the replies. Curiously, I have resolved this myself (after several weeks of failing)....RTL1090 was outputting on TCP 31011 rather than 31001. Quick change of settings in Planeplotter and now up and running.

    Leave a comment:


  • Oblivian
    replied
    Looking back on my historic notes. Beasttcp 31004 also available

    But you must click the output button/setting in RTL

    Or add /30003 /avr and use avr type.
    There's further planeplotter instructions on the FAQ




    Sent from my EML-L09 using Tapatalk

    Leave a comment:


  • Oblivian
    replied
    You can't use 'dvbt' when using rtl1090 or anything that suggest USB based direct as rtl takes control.

    You must use via tcp on its default output port 31001

    Be warned RTL does it's own data manipulation and filtering before outputting



    Sent from my EML-L09 using Tapatalk

    Leave a comment:


  • n37077
    started a topic Planeplotter won't connect to RTL1090

    Planeplotter won't connect to RTL1090

    All,

    Despite having successfully had RTL1090 feeding Planeplotter on an old laptop, I am failing miserably to set up my new laptop.

    RTL1090 is running fine.

    However Planeplotter will not connect. It gives me a screen with seven lines of what look like satellite data, and an error message:

    Failed to connect: 10061. Start server (BS/ANRB/etc) check details and try again.

    Things I have tried
    • Ensured that Planeplotter allows exceptions through the firewall
    • Deleted McAfee bloatware
    • Tried ADSBScope and the data from RTL1090 will not feed that either.


    Any ideas?

    Thanks

    '77
Working...
X