ModeSBeast on Raspberry Pi

[marke]

Thank you Oblivian, than solved the problem, easy as!!

[Oblivian]

I have one. And switched to beast-Splitter for a bit more stability https://forum.flightradar24.com/foru...438#post147438

The command you want, is here
https://forum.flightradar24.com/foru...002#post104002

" (linux/Pi) Run sudo lsusb and dmesg | grep tty to confirm device port to populate - CASE SENSITIVE!"

[marke]

Hi
I am trying to get a ModeSBeast running via USB on a rasberry Pi.

In the setup, I select ModeSBeast and USB
I then get asked for the Com port number.
I have tried to find a working solution to this, but can not do so
When i do a list, I find it on Bus 001 : Device 009

There is something I am missing.
The ModeSBeast is recieving signals, just cant get the communications to the Raspberry Pi.