Announcement

Collapse
No announcement yet.

DVB-T USB-stick shielded

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DVB-T USB-stick shielded

    Pictures speak for themselves:




  • #2
    Nice job , similar to what I do, I always use a Berquist thermal gap filler under the whole SDR, mine is the reverse way to yours, to achieve this. Dissipates the heat nicely into the diecast box keeping the temp very stable.

    There is some debate about the USB shield wire going directly to the case, I always do this, but some recommend using a 1M resistor in parallel with a 47n cap. Yet to try !!

    CIMG0407.jpg

    John
    T-EGMC14 -- RTL2832U / R820T+ Raspberry Pi + Dump1090 with home made 8 element colinear 12m above ground level.

    Comment

    Working...
    X