Announcement

Collapse
No announcement yet.

PHILIPPINE RADAR FORUM

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Originally posted by rog0322 View Post
    Tried connecting the receiver to laptop via ethernet but it cannot establish a connection. They seem not to know each other. The values are not found on cmd netstat. Should try another strategy.
    Perhaps you missed a step in your windows network settings of disabling the wifi connection and enabling the ethernet connection. netstat will work then from the cmd prompt.

    Comment


    • After you do that post a screen shot of the netstat results.

      Comment


      • while your laptop is set to ethernet connection the wireless on your phone will let you login here for posting.

        Comment


        • Originally posted by paradiselost View Post
          ok the problem is the network settings in the receiver. do you have a pc or laptop?

          1. connect the receiver with an ethernet cable to the pc or laptop..
          con
          2. disable wifi and enable the ethernet connection in the windows network connections.and click ok.

          3. Open the command prompt and type netstat.. In the list look :30336 or 30337. In your browser if you find one or another the 192.168.xxx.xxx is the ip. type that ip ie 192.168.1.xxx. your receiver setup will open. Beware the ip could be 10.xxx.xxx.xxx or 160.xxx.xxx.xxx instead of starting with 192.

          4. on your receiver login screen look for the network setting link at the bottom of the page.

          5, On the Receiver network page select use Static IP. for the IP address use 192.168.254.150. the Netmask is 255.255.255.0 and the Gateway is 192.168.254.254. for DNS type 8.8.8.8 click save..

          in another browser tab type 192.168.254.150. your receiver page will open
          I edited the instructions to clear them up.

          When you are through set the windows ethernet connection to disabled and wireless to enabled.
          Reconnect your FR24 ethernet cable to your modems lan port.

          paradiselost

          F-RPVD1
          Last edited by paradiselost; 2019-11-27, 00:19.

          Comment


          • Here.s the netstat screenshots
            Attached Files
            Roger S.
            F-RPML3
            CGY

            Comment


            • Or better yet. Email support@fr24.com and get them engaged to reset the device per the help documents
              Posts not to be taken as official support representation - Just a helpful uploader who tinkers

              Comment


              • Originally posted by rog0322 View Post
                Here.s the netstat screenshots
                Try 169.254.140.180 in a separate tab.

                Comment


                • Originally posted by paradiselost View Post

                  Try 169.254.140.180 in a separate tab.
                  Gather you know 169.254 is a loopback address due no DHCP allocation?

                  Port 4/WAN will not work with a receiver. That is designed for an input internet connection WIDE area network

                  Unless the router has been configured to dumb mode where all 4 ports are for client.
                  Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                  Comment


                  • If you truely think the feed box is on a fixed IP, and you can't revert back to it due to changed router/IP range.

                    I'd suggest plugging both feeder and PC into a switch (only), and changing PC ip to match the old range. Locate And simply browse to it and pre-setup.

                    If you don't know how to change/fix IP. Use something such as 'IP Shifter'. And set it as what your old router IP use to be (you wont be connecting it so it doesn't matter)

                    And use angry IP scanner to probe for it and reconfigure.

                    /edit You may also be able to fix it using the oldschool arp technique if you can see the MAC
                    https://www.digi.com/support/knowled...address-to-por
                    Last edited by Oblivian; 2019-11-27, 06:18.
                    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                    Comment


                    • FR24 Admin notified me that F-RPML3 is back online just this morning, Nov 29. I don't know why, maybe ISP finally allowed the receiver to upload data. The last thing I remember doing was transferring the connection from LAN4/WAN slot to LAN3 about midnight of November 26 after failure to log on to the receiver webpage, went to sle and forgot about the whole thing. I was diverted by the monitoring of TS "KAMMURI" entering PAR and although Macajalar Bay/CGY area is not in its path, we may get a bit of its outer rim effects. Just in time.

                      Thanks paradiselost and oblivian for the advice. BTW I can see the receiver local now IP as 192.168.254.104.
                      Roger S.
                      F-RPML3
                      CGY

                      Comment

                      Working...
                      X