Announcement

Collapse
No announcement yet.

Radar View

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cosmonium
    replied
    Could not load local radar

    For the past week or so I have been getting the following popup in Radar view: "Could not load local data: error." I need to refresh to go live again. I emailed support on this 3 days ago, but so far no response. This occurs every few minutes for a few hours, then becomes less frequent, then more frequent. I am running Windows 10 and Firefox 70.0. I feed data to FR24 and receive a business subscription. This morning, for the past hour, I have been receiving the error every couple of minutes for the most part. The longest I've gone without a refresh has been about 5 minutes. Yesterday, no problem all day. Very odd. Any insights out there? Thanks!
    Last edited by Cosmonium; 2019-11-09, 15:52.

    Leave a comment:


  • Anmer
    replied
    The free Active Display Lite from the Gatwick Aviation Socieyy has loads of outlines you can download.

    http://www.gatwickaviationsociety.org.uk/ADL_home.asp

    Or if you can't find what you need there, try making your own:

    https://radarspotting.com/forum/inde...pmod;dl=item12

    Leave a comment:


  • RuhrFlyer
    replied
    Does anyone know where I can get Basestation outline files for the German Airspace? I want to adapt my Radar View but cannot find anything useful on the Web...

    Leave a comment:


  • paradiselost
    replied
    New Problem With FR24 Sweden Mfgd FR24 Receivers

    Those of us that have received the new FR24 modem with the LED display will notice the loss of the ability to see local traffic using RadarView and VRS.

    Gunter's German manufacture of the receivers has changed over to FR24 in Sweden. The new receivers have an LED panel on the end replacing the 3 LEDS Gunter's original had.

    The new look and installations are here: https://goo.gl/rWNxs2

    Gunter's legacy design allowed streaming of LOCAL traffic to RadarView and VRS through a free streaming Listening Port. The new FR24 receivers with the LED front panel are programmed to require logging in with a username of flightradar24 and the mac address found on the bottom of the receiver. The mac address must be upper case with each section separated by Colons.

    From your browser on the address line you are required to insert http:// in front of the receiver IP to access the login page.

    The legacy RadarView doesn't have login capability nor does any version VRS. Data doesn't stream on the IP Listening Port without logging in.

    FR24 and VRS are aware of how the new security breaks RadarView and VRS plotting Local traffic.

    Stay tuned for fixes.

    paradiselost
    Last edited by paradiselost; 2019-08-18, 22:58.

    Leave a comment:


  • paradiselost
    replied
    Local Traffic NOT Appearing on Radarview

    Originally posted by Graeme2812 View Post
    I seem to have lost the ability to display my own tracked aircraft in RadarView for some reason. All other settings and data appears fine. (dump1090 map and 'Online' status on FR website etc)

    These are the two sets of settings (attached) i have been trying with.

    I've tried with 'localhost', http://192.168.0.**, 192.168.0.**, http://192.168.0.23:80 within the local host name menu, and all returning could not load data errors.

    [ATTACH=CONFIG]10324[/ATTACH] and [ATTACH=CONFIG]10325[/ATTACH]

    Anyone any ideas?

    On the FR24 webpage settings:

    local host: 192.168.0.23 is all that is entered...no http:// prefix or suffix :80 needed.
    if local traffic is selected your data cannot appear until you enable the changing the page IP from https: to http://. Once you do that the map will show red icons for the planes icon on the map.

    Be aware the local IP can change when your modem is cycled. Something else on your local network may take over .23.

    Your local traffic will not appear if the page your adjusting the settings on is https://www.flightradar24.com/radarview

    It only appears if http://www.flightradar24.com/radarview is the page you are looking at not https://.

    paradiselost
    F-RPVD1

    Leave a comment:


  • IZ8292SWL
    replied
    If it always worked don't change anything, probably there is a problem on their server...
    Contact the customer care!

    Leave a comment:


  • Graeme2812
    replied
    No, i can view my received data via dump1090/gmap.html page with no problem. I just can't seem to receive any data on the radarview page of FR website not matter what configuration i enter in the 'Local hostname' box (Radar view > Settings > local traffic enabled > <IP>). The frustrating thing is it worked before, with no apparent changes in my configuration.

    Leave a comment:


  • IZ8292SWL
    replied
    You mean the 192.168.X.X/dump1090/gmap.html?

    Leave a comment:


  • Graeme2812
    replied
    I seem to have lost the ability to display my own tracked aircraft in RadarView for some reason. All other settings and data appears fine. (dump1090 map and 'Online' status on FR website etc)

    These are the two sets of settings (attached) i have been trying with.

    I've tried with 'localhost', http://192.168.0.**, 192.168.0.**, http://192.168.0.23:80 within the local host name menu, and all returning could not load data errors.

    Settings1.png and Settings2.png

    Anyone any ideas?

    Leave a comment:


  • IZ8292SWL
    replied
    Thanks a lot.
    The visual design has changed and also now it says that "code is randomly selected".
    Cheers!
    Last edited by IZ8292SWL; 2019-03-02, 12:02.

    Leave a comment:


  • Anmer
    replied
    Originally posted by IZ8292SWL View Post
    Hi guys!
    The website version of Flightradar24 doesn't show info about the actual radar feeding the selected aircraft
    Oh yes it does. But you have to expand the Data Source frame. But remember, the radar code may not be the "actual radar feeding"!
    Attached Files

    Leave a comment:


  • IZ8292SWL
    replied
    Hi guys!
    The website version of Flightradar24 doesn't show info about the actual radar feeding the selected aircraft, but it works on mobile.
    Here is the website version:
    Schermata 2019-03-02 alle 12.24.01.png
    Here on mobile
    Immagine PNG.jpg

    Is there any problem?
    I'm a pro user
    Cheers!

    Leave a comment:


  • Coxy
    replied
    Me too, i have also suggested that the main screen just hightlight our own supplied aircraft in a different colour or hatching etc I prefer the standard view over the radar view.

    Leave a comment:


  • drworld88
    replied
    Originally posted by malross99 View Post
    I have the same issue. Have tried adding port number to the IP address as has been suggested, but no luck. Any assistance greatly appreciated.
    I also have tried unsuccessfully to get radar view to work with a rpi for over 6 months. Tried all as you have adding port number as well. i can get it to work if i feed fr24 from a pc attached sbs-1e as localhost though. But that isn't what i wanted!! Given up now.

    Regards
    Doug

    T-EGCC288

    Leave a comment:


  • malross99
    replied
    I have the same issue. Have tried adding port number to the IP address as has been suggested, but no luck. Any assistance greatly appreciated.

    Leave a comment:

Working...
X