Announcement

Collapse
No announcement yet.

Radar View

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • T-EGSH156
    replied
    Originally posted by Anmer View Post
    Open the web page in a different browser. For example, Radarview in Firefox, normal map view in Chrome.
    Thats a good idea! Thanks for the info, will try that. Rik

    Leave a comment:


  • Anmer
    replied
    Open the web page in a different browser. For example, Radarview in Firefox, normal map view in Chrome.

    Leave a comment:


  • T-EGSH156
    replied
    Hello everyone!

    Really quick and easy one for someone I think! I have searched but cannot find the answer though, so I have tried!

    I feed to FR24. Is it possible to have 2 screens open, one with radar, the other with map view i.e. the standard map?

    I have tried but it just replicates the other screen i.e. it changes to radar.

    Thanks in advance.

    Rik, Norwich, UK

    Leave a comment:


  • @eb4ewl
    replied

    Hello, I imagine you will be testing, radarview is not working well, the background is removed and the map is not seen, all the planes are white, when if it works, it does not allow a plane to be selected and the trace of that flight is not seen. I imagine that with the update the other day this is all in tests and we will have to wait. Thank you

    Leave a comment:


  • TroubiCZ
    replied
    Hello, I have found recently that airplane trails stopped showing on the radar view. Is that intended? If not, can you please revert back to previous functionality?

    Leave a comment:


  • riderz49
    replied
    Is there some trick to preventing the settings on the radar view page from reverting to their defaults. I keep having to reset them. Frustrating. Takes the fun out of this.

    Leave a comment:


  • Cosmonium
    replied
    Could not load local radar

    For the past week or so I have been getting the following popup in Radar view: "Could not load local data: error." I need to refresh to go live again. I emailed support on this 3 days ago, but so far no response. This occurs every few minutes for a few hours, then becomes less frequent, then more frequent. I am running Windows 10 and Firefox 70.0. I feed data to FR24 and receive a business subscription. This morning, for the past hour, I have been receiving the error every couple of minutes for the most part. The longest I've gone without a refresh has been about 5 minutes. Yesterday, no problem all day. Very odd. Any insights out there? Thanks!
    Last edited by Cosmonium; 2019-11-09, 15:52.

    Leave a comment:


  • Anmer
    replied
    The free Active Display Lite from the Gatwick Aviation Socieyy has loads of outlines you can download.

    http://www.gatwickaviationsociety.org.uk/ADL_home.asp

    Or if you can't find what you need there, try making your own:

    https://radarspotting.com/forum/inde...pmod;dl=item12

    Leave a comment:


  • RuhrFlyer
    replied
    Does anyone know where I can get Basestation outline files for the German Airspace? I want to adapt my Radar View but cannot find anything useful on the Web...

    Leave a comment:


  • paradiselost
    replied
    New Problem With FR24 Sweden Mfgd FR24 Receivers

    Those of us that have received the new FR24 modem with the LED display will notice the loss of the ability to see local traffic using RadarView and VRS.

    Gunter's German manufacture of the receivers has changed over to FR24 in Sweden. The new receivers have an LED panel on the end replacing the 3 LEDS Gunter's original had.

    The new look and installations are here: https://goo.gl/rWNxs2

    Gunter's legacy design allowed streaming of LOCAL traffic to RadarView and VRS through a free streaming Listening Port. The new FR24 receivers with the LED front panel are programmed to require logging in with a username of flightradar24 and the mac address found on the bottom of the receiver. The mac address must be upper case with each section separated by Colons.

    From your browser on the address line you are required to insert http:// in front of the receiver IP to access the login page.

    The legacy RadarView doesn't have login capability nor does any version VRS. Data doesn't stream on the IP Listening Port without logging in.

    FR24 and VRS are aware of how the new security breaks RadarView and VRS plotting Local traffic.

    Stay tuned for fixes.

    paradiselost
    Last edited by paradiselost; 2019-08-18, 22:58.

    Leave a comment:


  • paradiselost
    replied
    Local Traffic NOT Appearing on Radarview

    Originally posted by Graeme2812 View Post
    I seem to have lost the ability to display my own tracked aircraft in RadarView for some reason. All other settings and data appears fine. (dump1090 map and 'Online' status on FR website etc)

    These are the two sets of settings (attached) i have been trying with.

    I've tried with 'localhost', http://192.168.0.**, 192.168.0.**, http://192.168.0.23:80 within the local host name menu, and all returning could not load data errors.

    [ATTACH=CONFIG]10324[/ATTACH] and [ATTACH=CONFIG]10325[/ATTACH]

    Anyone any ideas?

    On the FR24 webpage settings:

    local host: 192.168.0.23 is all that is entered...no http:// prefix or suffix :80 needed.
    if local traffic is selected your data cannot appear until you enable the changing the page IP from https: to http://. Once you do that the map will show red icons for the planes icon on the map.

    Be aware the local IP can change when your modem is cycled. Something else on your local network may take over .23.

    Your local traffic will not appear if the page your adjusting the settings on is https://www.flightradar24.com/radarview

    It only appears if http://www.flightradar24.com/radarview is the page you are looking at not https://.

    paradiselost
    F-RPVD1

    Leave a comment:


  • IZ8292SWL
    replied
    If it always worked don't change anything, probably there is a problem on their server...
    Contact the customer care!

    Leave a comment:


  • Graeme2812
    replied
    No, i can view my received data via dump1090/gmap.html page with no problem. I just can't seem to receive any data on the radarview page of FR website not matter what configuration i enter in the 'Local hostname' box (Radar view > Settings > local traffic enabled > <IP>). The frustrating thing is it worked before, with no apparent changes in my configuration.

    Leave a comment:


  • IZ8292SWL
    replied
    You mean the 192.168.X.X/dump1090/gmap.html?

    Leave a comment:


  • Graeme2812
    replied
    I seem to have lost the ability to display my own tracked aircraft in RadarView for some reason. All other settings and data appears fine. (dump1090 map and 'Online' status on FR website etc)

    These are the two sets of settings (attached) i have been trying with.

    I've tried with 'localhost', http://192.168.0.**, 192.168.0.**, http://192.168.0.23:80 within the local host name menu, and all returning could not load data errors.

    Settings1.png and Settings2.png

    Anyone any ideas?

    Leave a comment:

Working...
X