Changed from SBS-3 to radarbox, problems with upload now

[frogger]

Thank you Mike!
The Basestation-Software was still open, so the fr24feed listends to the basestation and not to the radarbox.
I have closed both software and open only the radarbox-software now and it works fine!

[Mike]

FR24feed gets it data by listening on TCP port 30003. Example of software that can export data on port 30003 is Basestation, Airnav, Planeplotter, adsbscope and EuroScope. You don't need to change anything in FR24feed when you change receiver software. You don't need to move FR24 software, you don't even need to stop FR24 software. Just run everything exactly like it was before. FR24feed will check in the system for data on port 30003 and start to upload it.

[speedbird1960]

My problem is not about the radarbox-software. This works perfect and I receive a lot of flights in there.
My problem is the fr24 feeding-software whitch is not working with the radarbox.
I think it was still looking for the basestation-software.
But I open it from the radarbox-directory.

Have a read of this thread first: http://forum.flightradar24.com/threa...-FR24-feeders! and then if it does not help post a reply in that thread.

[frogger]

My problem is not about the radarbox-software. This works perfect and I receive a lot of flights in there.
My problem is the fr24 feeding-software whitch is not working with the radarbox.
I think it was still looking for the basestation-software.
But I open it from the radarbox-directory.

[speedbird1960]

Yes I am running Windows 7 32 bit and I have installed the radarbox-software in the programs-directory.

Thought as much, i will move this thread to this part of the Forum: http://forum.flightradar24.com/forums/4-AirNav-RadarBox

There is another thread about this problem in that section of the Forum.

http://forum.flightradar24.com/threa...-Radar-Box-PRO

[frogger]

Yes I am running Windows 7 32 bit and I have installed the radarbox-software in the programs-directory.

[speedbird1960]

Hi!

I have changed my equipment to the airnav radarbox installed on the same pc as the basestation-software.
I have copied the fr24feed.exe in the radarbox-directory and startet it. It asks me for the key. The opened the normal window, but the software get no flights. At Basestation stands only: ERROR (waiting 5 seconds)

What can I do to get the feed-software running with my airnav radarbox?

Thanks for replying.

Regards.

It sounds like you are running Windows 7, this causes lots of problems with Airnav.

I think there is a solution, if you check back later someone should post the answer.

[frogger]

Hi!

I have changed my equipment to the airnav radarbox installed on the same pc as the basestation-software.
I have copied the fr24feed.exe in the radarbox-directory and startet it. It asks me for the key. The opened the normal window, but the software get no flights. At Basestation stands only: ERROR (waiting 5 seconds)

What can I do to get the feed-software running with my airnav radarbox?

Thanks for replying.

Regards.