Originally posted by Charky
View Post
Announcement
Collapse
No announcement yet.
Uploading with Planeplotter and ground traffic
Collapse
X
-
Originally posted by airport View PostI had the same problem with Beast and PP some months ago. I fixed it by setting my PC clock accurate on time.
the problem here is not the time, problem here is no planes on ground.
@Mike
the setup is currently as follows:
LSGG4/T-LSGG2 is uploading now via PP as Net1 and under T-LSGG2
T-LSGG1 as usual, and usually no ground traffic
to allow you to compare my data visually Im uploading as T-EDFY to FR24 and additionally to Planefinder, same receiver, same antenna, both via PP and groundtraffic at LSGG should be shown.
good luck in searching.
Karl
Comment
-
Originally posted by Charky View Post@Mike
the setup is currently as follows:
LSGG4/T-LSGG2 is uploading now via PP as Net1 and under T-LSGG2
T-LSGG1 as usual, and usually no ground traffic
to allow you to compare my data visually Im uploading as T-EDFY to FR24 and additionally to Planefinder, same receiver, same antenna, both via PP and groundtraffic at LSGG should be shown.
good luck in searching.
Karl
Comment
-
Originally posted by Mike View PostI would prefer if you only upload with one software, and fr24feed is prefered. There may be interference if you use different softwares together. As I wrote fr24feed works and uploads your ground traffic. It's only temporarily blocked on the webpage right now due too some technical issues. Fr24feed ground traffic should be visible on monday-tuesday again.
Im uploading to FR24 currently using the fr24feed tool (2 pc's, 2 receiver, 2 antennas etc.). At the same time Im using PP to upload to planefinder to see the difference.
I can try to contact LSGG4/T-LSGG2.
btw: why this call changes of the uploaders. bringing a lot of confusion f.ex. in the chat.
Comment
Comment