Announcement

Collapse
No announcement yet.

Aircraft on ground not displaying

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • gwilliums
    replied
    Hi mike, no I cuold'nt see the replay however, that was about the time I joined on here with plane plotter data and the radar came up as net 1, now I am running fr24 feed from my sbs the plane do not show on the gnd, at the moment i have data through plane plotter and fr24 and can see plane on the gnd at egss and Luton eggw.

    Leave a comment:


  • speedbird1960
    replied
    Originally posted by gwilliums View Post
    I would like to know how CDG is working

    Hi Gordon.

    Just been watching aircraft on the ground at CDG in satellite mode, it's such a good signal that it looks like the Radar is located on the airport.

    Link to CDG: http://www.flightradar24.com/49.01,2.55/14

    I have noticed positional data for Avro RJ85's is out by about 500ft, the aircraft show up in strange places.

    Did you manage to get replay working.

    Mike / Speedbird
    Last edited by speedbird1960; 2011-12-04, 13:45.

    Leave a comment:


  • gwilliums
    replied
    can't get this working maybe its me?

    Leave a comment:


  • speedbird1960
    replied
    Originally posted by gwilliums View Post
    when was the stansted screen shot taken?
    Hi Gordon.

    It was taken on 22nd of November., here's is the replay. ( Select pause as soon as the page opens and zoom into where the Ryan international is heading and then press play.)
    http://www.flightradar24.com/2011-11-22/11:48/RYN7400 ( Link valid for about one week)

    Leave a comment:


  • gwilliums
    replied
    when was the stansted screen shot taken?

    Leave a comment:


  • speedbird1960
    replied
    Hi Gordon.

    I recently spotted Five aircraft on the ground at Stansted and in the past i have seen them on the ground at Manchester.



    Mike / Speedbird
    Last edited by speedbird1960; 2011-12-04, 13:22.

    Leave a comment:


  • gwilliums
    replied
    I would like to know how CDG is working

    Leave a comment:


  • Anmer
    replied
    Originally posted by gwilliums View Post
    Hi mike good to hear from you I am sharing direct from sbs1-er to fr24
    Ah OK. It's just that the MMS2 data doesn't include ground traffic. Maybe the FR24 feed is the same as the same programmer was responsible for both feeds.

    Leave a comment:


  • gwilliums
    replied
    Connection to fr24

    Hi mike good to hear from you I am sharing direct from sbs1-er to fr24

    Leave a comment:


  • davewave
    replied
    I'd love to see if you can get this resolved. The only airport I've seen with ground traffic on fr is Paris CDG, and event then it's very hit and miss.

    If you can get egss loaded I'll have a go at injecting into flight simulator.

    Leave a comment:


  • Anmer
    replied
    Gordon, are you sharing your data direct with FR24 or via MMS2?

    Leave a comment:


  • Oblivian
    replied
    Perhaps check the datastream in a web browser http://ip.of.sbsoutput:30003 and see if they are included in the output. I vaguely remember their being an option to ignore ground data which may only be reflected on the output stream.

    On my ADSBscope screen I see raw data with the flag of 'ground' in the actual decode, but it does also not output to my FR42 uploader either.

    Leave a comment:


  • gwilliums
    started a topic Aircraft on ground not displaying

    Aircraft on ground not displaying

    Can anyone explain to me why I have aircraft on the ground at my local airport moving around on the sbs and plane plotter screens but not on Fr 24?, I am 8 mls from the airport and can see most aircraft moving around the airport but it does not display this on Fr24 I am sharing my data.
    regards gordon, gwilliums, Egss1.
Working...
X