FEED FR24 FROM ARCH LINUX....
ArchLinux - dump1090-fa.png ArchLinux - OS-5.pngArchLinux - fr24feed.png
STEP 1 of 3:
Install Arch Linux on Intel Desktop
Click above link or scroll down to post #2 to see the How-to
NOTE: If you want to install fr24feed on a PI running Arch Linux (alarmpi), click link below
Install AlarmPi OS (Arch linux arm on Pi) and dump1090-fa+fr24feed on it
STEP 2 of 4:
Install dump1090-fa
The method below builds dump1090-fa from source code, using ArchLinux's PKGBUILD and foo.install scripts.
At end you will be asked if you want to install the built package [Y/n].
If you chose Y, the dump1090-fa will be installed immediately.
If you chose not to install the build package immediately, you can install it later by following command
THINGS TO DO AFTER INSTALLATION OF dump1090-fa IS COMPLETED
(1) IMPORTANT: Reboot computer
otherwise dump1090-fa will fail to start, and either the Syview web page wont show (Not Found), or a rotating wheel will show.
(2) To make SkyView Map show range rings, do following:
STEP 3 of 4:
Install FR24 feeder
OPTION - 1:
Using amd64 binary "fr24feed_1.0.25-3_amd64.tgz"
Copy-paste following two commands one by one in the terminal:
The 2nd command below is very long.
Please scroll right to see and copy this command in full (including the " at the end).
OPTION - 2:
Using i386 binary "fr24feed_1.0.25-3_i386.tgz"
Copy-paste following two commands one by one in the terminal:
The 2nd command below is very long.
Please scroll right to see and copy this command in full (including the " at the end).
After FR24 Feeder installation script finishes, it displays following message:
CONFIGURATION OF FR24FEED
The configuration file can be edited by following command;
Default contents of FR24FEED config file
In the default file, the value of fr24key is blank.
You can add the value of fr24key by editing this file, OR during command "sudo fr24feed --signup"
Default setting are for a decoder like dump1090-mutability or dump1090-fa running on the Computer.
This can be changed by editing config file.
TO UNINSTALL FR24FEED
To completely remove configuration and all files, give following 7 commands:
STEP 4 of 4:
Install Piaware data feeder
https://github.com/abcd567a/piaware-...main/README.md
.
ArchLinux - dump1090-fa.png ArchLinux - OS-5.pngArchLinux - fr24feed.png
STEP 1 of 3:
Install Arch Linux on Intel Desktop
Click above link or scroll down to post #2 to see the How-to
NOTE: If you want to install fr24feed on a PI running Arch Linux (alarmpi), click link below
Install AlarmPi OS (Arch linux arm on Pi) and dump1090-fa+fr24feed on it
STEP 2 of 4:
Install dump1090-fa
The method below builds dump1090-fa from source code, using ArchLinux's PKGBUILD and foo.install scripts.
Code:
sudo pacman -Sy --needed git binutils make fakeroot pkgconf gcc git clone https://github.com/abcd567a/dump1090-fa-arch.git cd dump1090-fa-arch makepkg -si
If you chose Y, the dump1090-fa will be installed immediately.
If you chose not to install the build package immediately, you can install it later by following command
Code:
cd dump1090-fa-arch sudo pacman -U dump1090-fa-*.pkg.tar.xz
(1) IMPORTANT: Reboot computer
otherwise dump1090-fa will fail to start, and either the Syview web page wont show (Not Found), or a rotating wheel will show.
(2) To make SkyView Map show range rings, do following:
- Open file "dump1090-fa" for editing
Code:sudo nano /etc/default/dump1090-fa
- In the opened file, go to following line: RECEIVER_OPTIONS="--device-index 0 --gain -10 --ppm 0 --net-bo-port 30005"
- In above line, add your latitude and longitude, so the line becomes like below:
RECEIVER_OPTIONS="--device-index 0 --gain -10 --lat xx.xxxx --lon yy.yyyy --ppm 0 --net-bo-port 30005"
NOTE: Repalce xx.xxxx and yy.yyyy by your actual latitude and Longitude - Restart dump1090-fa
Code:sudo systemctl restart dump1090-fa
- Clear browser cache and reload browse
STEP 3 of 4:
Install FR24 feeder
OPTION - 1:
Using amd64 binary "fr24feed_1.0.25-3_amd64.tgz"
Copy-paste following two commands one by one in the terminal:
The 2nd command below is very long.
Please scroll right to see and copy this command in full (including the " at the end).
Code:
sudo pacman -Sy --needed wget sudo bash -c "$(wget -O - https://raw.githubusercontent.com/abcd567a/Archlinux-adsb/master/ArchLinux-install-fr24feed_amd64.sh)"
Using i386 binary "fr24feed_1.0.25-3_i386.tgz"
Copy-paste following two commands one by one in the terminal:
The 2nd command below is very long.
Please scroll right to see and copy this command in full (including the " at the end).
Code:
sudo pacman -Sy --needed wget sudo bash -c "$(wget -O - https://raw.githubusercontent.com/abcd567a/Archlinux-adsb/master/ArchLinux-install-fr24feed_i386.sh)"
After FR24 Feeder installation script finishes, it displays following message:
Code:
INSTALLATION COMPLETED ======================= PLEASE DO FOLLOWING: ======================= (1) SIGNUP: (a) If you already have a feeder key, open file fr24feed.ini by following command and add fr24key: sudo nano /etc/fr24feed.ini Save (Ctrl+o) and Close (Ctrl+x) file fr24feed.ini then restart fr24feed by following command: sudo systemctl restart fr24feed (b) Alternatively signup using following command sudo fr24feed --signup (2) In your browser, go to web interface at http://localhost:8754 To see status sudo systemctl status fr24feed To restart sudo systemctl restart fr24feed To stop sudo systemctl stop fr24feed
CONFIGURATION OF FR24FEED
The configuration file can be edited by following command;
Code:
sudo nano /etc/fr24feed.ini
In the default file, the value of fr24key is blank.
You can add the value of fr24key by editing this file, OR during command "sudo fr24feed --signup"
Default setting are for a decoder like dump1090-mutability or dump1090-fa running on the Computer.
This can be changed by editing config file.
Code:
receiver="beast-tcp" host="127.0.0.1:30005" fr24key="" bs="no" raw="no" logmode="1" logpath="/var/log/fr24feed/" windowmode="0" mpx="no" mlat="yes" mlat-without-gps="yes" use-http=yes http-timeout=20
TO UNINSTALL FR24FEED
To completely remove configuration and all files, give following 7 commands:
Code:
sudo systemctl stop fr24feed sudo systemctl disable fr24feed sudo rm /lib/systemd/system/fr24feed.service sudo rm -rf /usr/share/fr24feed sudo rm /usr/bin/fr24feed sudo rm /etc/fr24feed.ini sudo rm -rf /var/log/fr24feed
STEP 4 of 4:
Install Piaware data feeder
https://github.com/abcd567a/piaware-...main/README.md
.
Comment