Announcement

Collapse
No announcement yet.

Name of radar missing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ClarDold
    replied
    Originally posted by Oblivian View Post
    Click the down arrow on the right of the blue bar
    Just to clarify, in the top right, "Map View (default)"
    Select an aircraft that you might expect to be seen by your "RADAR".
    Scroll to the bottom of the information panel for that aircraft.
    On the blue bar that has an icon of a RADAR, and the text "Data Source ADS-B", click the down arrow at the right end of the bar.
    The display might look like this, where T-KSTS12 would be my feeder, F-KSTS3 is the RADAR at my local airport.
    F-KSTS3
    Receiver code displayed is randomly chosen from all receivers currently seeing the aircraft.

    Leave a comment:


  • charliehorse
    replied
    I think that was always the way.
    I use Radarview to look at how many my setup can "see" and how far out I can track.

    Leave a comment:


  • Anmer
    replied
    Originally posted by charliehorse View Post
    You can still put in a filter with your radar.
    That will show all aircraft tracked by you.(or looks that way..)
    The fliter will only show aircraft "assigned" by FR24 to a specific radar. Not all aircraft tracked by the actual station.

    Right now my receiver's tracking 110 aircraft. Using a filter for my feed, FR24 shows it's tracking just one.

    Leave a comment:


  • charliehorse
    replied
    You can still put in a filter with your radar.
    That will show all aircraft tracked by you.(or looks that way..)

    Leave a comment:


  • Dushan
    replied
    Oh, OK I don't have this problem. Mine's on a 20th floor, 15 km from CYYZ. Every maintenance truck, tug, wildlife control, and aircraft are always picked up by me.

    Leave a comment:


  • Oblivian
    replied
    More 'why don't I ever see my radar Id, always the f-radar, and he's miles away and I receive more..'

    Sent from my EML-L09 using Tapatalk

    Leave a comment:


  • Dushan
    replied
    Oh, you mean people want to see "Dushan" instead of F-CYTZ1?

    Leave a comment:


  • Oblivian
    replied
    It takes away the temptation for people to log fault causing complaints about wanting to see their ID shown there

    Sent from my EML-L09 using Tapatalk

    Leave a comment:


  • Dushan
    replied
    Well, whadddaya know... There it is, But why hide it and have to click. It used to be right there. I'd say a lot more meaningful and interesting than ICAO 24-bit address.

    Leave a comment:


  • Oblivian
    replied
    Click the down arrow on the right of the blue bar

    Sent from my EML-L09 using Tapatalk

    Leave a comment:


  • Dushan
    replied
    Originally posted by Patrick Reeves View Post
    When the craft is out of ADS-B range, it will be picked up by FAA or US/Canada radar. Or it may be MLAT which also doesn't show up.
    Understood, but that's not what I am talking about. That are landing, taking off, and moving about an airport that is line of sight from my antenna are not showing that they are being picked up by any radar. This guy was landing at CYYZ and was most likely being picked up by my antenna/radar.
    Attached Files

    Leave a comment:


  • Patrick Reeves
    replied
    When the craft is out of ADS-B range, it will be picked up by FAA or US/Canada radar. Or it may be MLAT which also doesn't show up.

    Leave a comment:


  • Dushan
    started a topic Name of radar missing

    Name of radar missing

    I noticed, recently, that the name of the radar that is providing flight information, is missing.
    It used to be one of the last entries of the flight information together with Squawk code and Lat/Lon.

    Is there a reason for it or is it a bug?
Working...
X