Announcement

Collapse
No announcement yet.

Connection terminated

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Oblivian
    replied
    Originally posted by Lincolnshire Poacher View Post
    I had not installed zdiag, I also suspected that windows had installed drivers for the DVB stick. My solution was as follows,

    Removed the usb dvb stick

    did a system restore to a date prior to me 1st putting the dvb stick in, this removed the drivers.

    run zdiag downloaded from the link in an earlier post in this thread, put the dvb stick in, this was detected by zdiafg, I then installed the drivers.

    Hope this helps.

    LP
    This is a very old thread and now turned to a different problem.

    The latest issue that does similar has been discussed in the last few new threads, related to windows not selecting the correct device number to connect to and decode data

    See here.. https://forum.flightradar24.com/showthread.php?p=94712

    Most likely the cause and a few tips to remedy.

    Sent from my XT1092 using Tapatalk

    Leave a comment:


  • Lincolnshire Poacher
    replied
    Originally posted by Xanderix View Post
    hi,
    I also just did the installation and I may have the same issue.
    I have re installed the driver though but the error persists.
    Any suggestion?
    thanks!
    Sander

    [ATTACH=CONFIG]7578[/ATTACH]
    I had not installed zdiag, I also suspected that windows had installed drivers for the DVB stick. My solution was as follows,

    Removed the usb dvb stick

    did a system restore to a date prior to me 1st putting the dvb stick in, this removed the drivers.

    run zdiag downloaded from the link in an earlier post in this thread, put the dvb stick in, this was detected by zdiafg, I then installed the drivers.

    Hope this helps.

    LP

    Leave a comment:


  • Khan
    replied
    Originally posted by Xanderix View Post
    hi,
    I also just did the installation and I may have the same issue.
    I have re installed the driver though but the error persists.
    Any suggestion?
    thanks!
    Sander

    [ATTACH=CONFIG]7578[/ATTACH]
    Try restarting your computer. Maybe you still have a dump1090 instance running in the background.

    Leave a comment:


  • Xanderix
    replied
    hi,
    I also just did the installation and I may have the same issue.
    I have re installed the driver though but the error persists.
    Any suggestion?
    thanks!
    Sander

    fr24issue2.png

    Leave a comment:


  • Khan
    replied
    Use this link to create free business account. Make sure to use the same email address that is connected to your feed.

    https://www.flightradar24.com/premiu...p?account=free

    Leave a comment:


  • Lincolnshire Poacher
    replied
    Thanks guys, all sorted, just need to know how to activate my free business subscription now.

    LP

    Leave a comment:


  • Khan
    replied
    You can download it from here.

    http://zadig.akeo.ie/

    Leave a comment:


  • Oblivian
    replied
    Sounds like you forget the zadig driver change?

    Sent from my XT1092 using Tapatalk
    Last edited by Oblivian; 2016-06-02, 03:33.

    Leave a comment:


  • Lincolnshire Poacher
    started a topic Connection terminated

    Connection terminated

    Just done a lean install of FR24 feeder on my windows 7 pc, the FR24 is the latest version downloaded from Flightradar. The initial set up went ok and it starts to communicate with the dvb stick but the i gaet the terminated message.

    When i 1st put the stick in it started to automatically install but I interrupted the process. I suspect something else is causing a conflict, I cant see anything in device driver. Can anyone advise please?

    LP
Working...
X