Announcement

Collapse
No announcement yet.

How to Install dump1090-mutability_1.15~dev on RPi

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ABi69
    replied
    Oblivian, wiedehopf

    Works like a charm, thank you very much!

    Leave a comment:


  • ABi69
    replied
    Thx for your help, i will try.

    Leave a comment:


  • wiedehopf
    replied
    My script removes all the other dump1090s
    Then reconfigures FR24 so it doesn't try to install it's own dump1090.

    Leave a comment:


  • Oblivian
    replied
    Not really. If you are going to do that, use dump1090-fa outright. Mutability development has ended. (this is a 3yr old solution now) -FA continues

    Be sure to remove Mutability first

    Wiedehopf has a bundle with all 3 maps.

    https://github.com/wiedehopf/adsb-sc...for-dump1090fa

    Leave a comment:


  • ABi69
    replied
    Ah, okay. Thx.

    So it's not possible to use SkyView with mutability?
    I thought that there would be a kind of trick...

    Leave a comment:


  • Oblivian
    replied
    Originally posted by ABi69 View Post
    I made it as described at page 1 here in this thread.
    Well that doesn't make a lot of sense.

    Cause the skyview branding is in dump1090-fa (flightaware) and not 1.15 -mutability-dev
    So unless they have redirected the -dev or included it in that...

    sudo apt policy dump1090-mutability
    sudo apt policy dump1090-fa

    If both report results of installed, you have both somehow. (did you install piaware too and chose wrong settings - should have specified feeder already present?) And should pick one and remove the other

    Leave a comment:


  • ABi69
    replied
    I made it as described at page 1 here in this thread.

    Leave a comment:


  • Oblivian
    replied
    If you have sky aware, why did you install dump1090-mutability (a different version)

    You can't run both.

    Mixing and matching instructions when you don't understand the consequences/ask first is not advised.

    Leave a comment:


  • ABi69
    replied
    Okay, system is running...
    I have Raspbian Buster but have tried "Method 2" (Build dump1090-mutability_1.15~dev from source (Raspbian Stretch)), which worked for me.
    Now i have only a little problem: PiAware (SkyAware) doesn't show any plane and says "Problem fetching data from dump1090", but with http://<ip-from-my-raspberry>/dump1090/gmap.html all ist running perfect...

    No big problem, but is it fixable somehow?


    Thanks
    Andreas
    Last edited by ABi69; 2020-03-08, 21:15.

    Leave a comment:


  • ABi69
    replied
    Thanks, will try...

    Leave a comment:


  • wiedehopf
    replied
    Install the packages it's missing ...

    sudo apt install package1 package2

    with package1 and package2 being what it's missing ...

    Leave a comment:


  • ABi69
    replied
    Hi!

    I'm new to Raspbian and have a problem with step 3 on page 1. When i want to build the package, there comes the following error (Raspbian BUSTER):

    dpkg-source --before-build .
    dpkg-checkbuilddeps: error: Unmet build dependencies: debhelper (>= 8) librtlsdr-dev libusb-1.0-0-dev
    dpkg-buildpackage: warning: build dependencies/conflicts unsatisfied; aborting
    dpkg-buildpackage: warning: (Use -d flag to override.)
    Can anyone help?

    Thanks in advance
    Andreas

    Leave a comment:


  • Scroggie
    replied
    Just a quick note for abcd567

    Just used your excellent instructions (again!!) on How to Install dump1090-mutability_1.15~dev on RPi and spotted a tiny typo in the add RSSI column section.


    STEP-2

    2.1 - Prepration
    Code:


    Unless that's the Canadian spelling!!!

    Regards
    Scroggie

    Leave a comment:


  • wiedehopf
    replied
    I wouldn't recommend it, you are on your own with that.
    It's not like it's complicated to change gain via command line: https://github.com/wiedehopf/adsb-sc...rovided-helper
    That's already included.

    Note you should then disable the automatic algorithm for changing gain.

    Leave a comment:


  • Scroggie
    replied
    Thanks again, I've now got both the tar1090 and the dump1090-fa maps with colo(u)red and blue dotted range lines out to 300nm, the upintheair theoretical coverage area and the Bing maps all as I want them.
    I would like to get back the ability to set receiver gain from the map views perhaps by changing the paths in the various abcd567's instructions on that subject. would that work? Anyway it's past 1 am over here now so I'm giving up for tonight.

    T-EGSY1

    Leave a comment:

Working...
X