Announcement
Collapse
No announcement yet.
How to Install dump1090-mutability on RPi
Collapse
X
-
Hello group, I have dump1090 installed and after many years I get the maps like this, which could have happened. any help would be well receivedYou do not have permission to view this gallery.
This gallery has 1 photos.
-
forgot to give following two commands required after above installation commands (Now added)
Code:sudo usermod -a -G plugdev dump1090 sudo reboot
Leave a comment:
-
Originally posted by abcd567 View Post
Please see Oblivian's good advise above to use alternatives.
However if you are still keen to install dump1090-mutability, then the current installation procedure is following command:
Code:sudo apt install lighttpd sudo apt install dump1090-mutability
I'll give it a try.
Leave a comment:
-
Originally posted by ramimz View PostIs this still the correct installation process?
However if you are still keen to install dump1090-mutability, then the current installation procedure is following command:
Code:sudo apt install lighttpd sudo apt install dump1090-mutability sudo usermod -a -G plugdev dump1090 sudo reboot
Last edited by abcd567; 2023-06-11, 07:18.
Leave a comment:
-
Dump1090-mutability is no longer maintained
Better to use an alternative
Leave a comment:
-
@Pasajero311To clear log of dump1090-mutability:
sudo rm / var / log / dump1090-mutability.log
Note: I had to insert spaces before and after / as the forum wont let me post the command if I did not insert spaces. Please remove the spaces when using above command.
Leave a comment:
-
Hello good afternoon to the group
It's been about 7 years that I have installed
dump1090-mutability 1.15 but I see that I run out of megabytes in the SD
Is there a file that generates a log?
I have dump1090-mutability and collectd# installed
Regards from Anthony
Leave a comment:
-
Originally posted by turboprops View PostI
Executing: /tmp/apt-key-gpghome.LhWEL0bhYA/gpg.1.sh --recv-key --keyserver pgp.mit.edu C969F07840C430F5
gpg: keyserver receive failed: Server indicated a failure
Can someone please explain to me what is the problem and how to solve it, thank you
Try this:
Code:wget http://repo-feed.flightradar24.com/rpi_binaries/fr24feed_1.0.29-8_armhf.deb sudo dpkg -i fr24feed_1.0.29-8_armhf.deb
.Last edited by abcd567; 2022-02-25, 20:29.
Leave a comment:
-
Consider using this guide to install fr24: https://github.com/wiedehopf/adsb-wi...ADS-B-receiver
While you're at it, might as well go to readsb, newer map than dump1090-mutability.
Leave a comment:
-
I don't know if this is the right place to ask, but after installed dump1090-multability, I went on install fr24_rpi using the given commandCode:sudo bash -c "$(wget -O - https://repo-feed.flightradar24.com/install_fr24_rpi.sh)"
Code:--2022-02-25 17:14:10-- https://repo-feed.flightradar24.com/install_fr24_rpi.sh Resolving repo-feed.flightradar24.com (repo-feed.flightradar24.com)... 104.17.44.52, 104.17.43.52, 104.17.46.52, ... Connecting to repo-feed.flightradar24.com (repo-feed.flightradar24.com)|104.17.44.52|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1349 (1.3K) [application/x-sh] Saving to: 'STDOUT' - 100%[==========================>] 1.32K --.-KB/s in 0s 2022-02-25 17:14:10 (5.24 MB/s) - written to stdout [1349/1349] Get:1 http://raspbian.raspberrypi.org/raspbian buster InRelease [15.0 kB] Hit:2 http://archive.raspberrypi.org/debian buster InRelease Fetched 15.0 kB in 2s (9612 B/s) Reading package lists... Done Reading package lists... Done Building dependency tree Reading state information... Done dirmngr is already the newest version (2.2.12-1+rpi1+deb10u1). The following package was automatically installed and is no longer required: python-colorzero Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Executing: /tmp/apt-key-gpghome.jWbtzzFSeN/gpg.1.sh --recv-key --keyserver keyserver.ubuntu.com C969F07840C430F5 gpg: keyserver receive failed: Server indicated a failure Executing: /tmp/apt-key-gpghome.VUF2WOAXtV/gpg.1.sh --recv-key --keyserver pool.sks-keyservers.net C969F07840C430F5 gpg: keyserver receive failed: Server indicated a failure Executing: /tmp/apt-key-gpghome.LhWEL0bhYA/gpg.1.sh --recv-key --keyserver pgp.mit.edu C969F07840C430F5 gpg: keyserver receive failed: Server indicated a failure
Leave a comment:
-
Originally posted by Scroggie View Post
If you happen to see this Captain, you might like to add this to your instructions for gain setting :-
BULLSEYE
Code:
sudo apt update
sudo apt install php7.4-cgi
Oblivian As you have administrative powers, can you please help me to save the post after I edit it?
FR24 forum wont let me save after edit.png
Leave a comment:
-
Originally posted by Scroggie View PostBUSTER
Code:
sudo apt install php7.3-cgi
However. sudo apt install php7.4-cgi does the job nicely!
If you happen to see this Captain, you might like to add this to your instructions for gain setting :-
BULLSEYE
Code:
sudo apt update
sudo apt install php7.4-cgi
The easiest way is to give following version-less command, and apt itself selects and installs the version applicable to the OS (Stretch or Buster or Bullseye)
Code:sudo apt install -y php-cgi
If you want versioned command, use following:
Jessie:
sudo apt install -y php5-cgi;
Stretch:
sudo apt install -y php7.0-cgi
Buster:
sudo apt install -y php7.3-cg
Bullseye:
sudo apt install -y php7.4-cgi
.Last edited by abcd567; 2022-02-22, 21:33.
Leave a comment:
Leave a comment: