(running "dump1090-mutability --help 2>&1 | head -n4")
Now it says...
-----------------------------------------------------------------------------
| dump1090 ModeS Receiver EB_SOURCE EB_VERSION |
-----------------------------------------------------------------------------
--device-index <index> Select RTL device (default: 0)
Announcement
Collapse
No announcement yet.
How to Install dump1090-mutability on RPi
Collapse
X
-
Sorry for that, i changed some URLs, it should be working again now.
Leave a comment:
-
Originally posted by wiedehopf View PostDoes it still say command not found when you type this:
As i already said, save yourself some trouble, use this: https://github.com/wiedehopf/adsb-wi...for-dump1090fa
https://github.com/wiedehopf/adsb-sc...for-dump1090fa working.
Leave a comment:
-
Does it still say command not found when you type this:
dump1090-mutability
As i already said, save yourself some trouble, use this: https://github.com/wiedehopf/adsb-wi...for-dump1090fa
Leave a comment:
-
I have installed again according to your instructions.
However the issue remains.
I'll try to use another usb stick and test again...
Leave a comment:
-
You're on buster anyway.
Just try installing it again:
sudo apt install dump1090-mutability
Maybe you just need to configure it and enable the automatic start:
sudo dpkg-reconfigure dump1090-mutability
Leave a comment:
-
I used the following command to install dump1090-mutability_1.15~dev:
sudo bash -c "$(wget -O - https://raw.githubusercontent.com/abcd567a/dump1090/master/install_dump1090_mut_1.15.sh)"
"dump1090-mutability --help 2>&1 | head -n4" -> output: "command not found"
Yes, I've tried rebooting several times. I can now access remotely the ip/dump1090/gmap.html. However that page with unknown version appear.
"cat /etc/fr24feed.ini" -> output:
receiver="beast-tcp"
fr24key="xxxxxxxxxxxxxxxx" (my password is correct, verified)
host="127.0.0.1:30005"
bs="no"
raw="no"
logmode="0"
windowmode="0"
logpath="/var/log"
mpx="no"
mlat="yes"
mlat-without-gps="yes"
Leave a comment:
-
Looks like dump1090-mutability is just not running.
But you should get that empty page on every computer (Ctrl-F5 might be required).
Oh right then.
This will tell you which version is actually installed:
dump1090-mutability --help 2>&1 | head -n4
You have tried rebooting?
I'm not exactly sure how this version works in regards to fr24feed.ini settings.
Let's see it so i know what's going on:
cat /etc/fr24feed.ini
Leave a comment:
-
-
Thanks for help.
I'm running buster: PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
Leave a comment:
-
I don't feel like debugging the problem right now, if you want something that will in 99% of case work out of the box, use this, it does most stuff automatically:
What system are you on anyway? This command will answer it:
cat /etc/os-release | grep PRETTY
Leave a comment:
-
It is not working.
As a matter of fact I can only access the webpage (/dump1090/gmap.html) from raspberry directly, can't do it from other PC.
Leave a comment:
-
Hi all,
I have followed the method 1) procedure and get the dump1090 page but says "unknown version" instead of 1.15dev
I'm using raspbian buster. Any clues?
Thanks for the help
Leave a comment:
-
Originally posted by ramimz View Postbecause he gave me an error when i try to install "READ & SET GAIN FROM BROWSER / DUMP1090 MAP"
and after reboot, it was stuck in home screen, and not loading the OS.
now i finished step 10 without any problem
I have tested it, works ok.
You can now install it.
Leave a comment:
Leave a comment: