How to Install dump1090-mutability on RPi

[abcd567]

I
Executing: /tmp/apt-key-gpghome.LhWEL0bhYA/gpg.1.sh --recv-key --keyserver pgp.mit.edu C969F07840C430F5
gpg: keyserver receive failed: Server indicated a failure

Can someone please explain to me what is the problem and how to solve it, thank you

Try this:

wget http://repo-feed.flightradar24.com/rpi_binaries/fr24feed_1.0.29-8_armhf.deb

sudo dpkg -i fr24feed_1.0.29-8_armhf.deb

.

[wiedehopf]

Consider using this guide to install fr24: https://github.com/wiedehopf/adsb-wi...ADS-B-receiver

While you're at it, might as well go to readsb, newer map than dump1090-mutability.

[turboprops]

I don't know if this is the right place to ask, but after installed dump1090-multability, I went on install fr24_rpi using the given command

sudo bash -c "$(wget -O - https://repo-feed.flightradar24.com/install_fr24_rpi.sh)"

But I got this error

--2022-02-25 17:14:10-- https://repo-feed.flightradar24.com/install_fr24_rpi.sh
Resolving repo-feed.flightradar24.com (repo-feed.flightradar24.com)... 104.17.44.52, 104.17.43.52, 104.17.46.52, ...
Connecting to repo-feed.flightradar24.com (repo-feed.flightradar24.com)|104.17.44.52|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1349 (1.3K) [application/x-sh]
Saving to: 'STDOUT'

- 100%[==========================>] 1.32K --.-KB/s in 0s

2022-02-25 17:14:10 (5.24 MB/s) - written to stdout [1349/1349]

Get:1 http://raspbian.raspberrypi.org/raspbian buster InRelease [15.0 kB]
Hit:2 http://archive.raspberrypi.org/debian buster InRelease
Fetched 15.0 kB in 2s (9612 B/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
dirmngr is already the newest version (2.2.12-1+rpi1+deb10u1).
The following package was automatically installed and is no longer required:
python-colorzero
Use 'sudo apt autoremove' to remove it.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Executing: /tmp/apt-key-gpghome.jWbtzzFSeN/gpg.1.sh --recv-key --keyserver keyserver.ubuntu.com C969F07840C430F5
gpg: keyserver receive failed: Server indicated a failure
Executing: /tmp/apt-key-gpghome.VUF2WOAXtV/gpg.1.sh --recv-key --keyserver pool.sks-keyservers.net C969F07840C430F5
gpg: keyserver receive failed: Server indicated a failure
Executing: /tmp/apt-key-gpghome.LhWEL0bhYA/gpg.1.sh --recv-key --keyserver pgp.mit.edu C969F07840C430F5
gpg: keyserver receive failed: Server indicated a failure

Can someone please explain to me what is the problem and how to solve it, thank you

[Oblivian]

Possibly something to do with it being targeted

[abcd567]

If you happen to see this Captain, you might like to add this to your instructions for gain setting :-

BULLSEYE
Code:
sudo apt update
sudo apt install php7.4-cgi

I tried to edit the post, but the forum's over active protection refuses to let me save the edited post, and displays following Error message:

Oblivian As you have administrative powers, can you please help me to save the post after I edit it?



FR24 forum wont let me save after edit.png

[abcd567]

BUSTER
Code:
sudo apt install php7.3-cgi

However. sudo apt install php7.4-cgi does the job nicely!

If you happen to see this Captain, you might like to add this to your instructions for gain setting :-

BULLSEYE
Code:
sudo apt update
sudo apt install php7.4-cgi

Thanks Scroggie for pointing out. I will update the how-to for "Set Gain from Browser".

The easiest way is to give following version-less command, and apt itself selects and installs the version applicable to the OS (Stretch or Buster or Bullseye)

sudo apt install -y php-cgi

If you want versioned command, use following:

Jessie:
sudo apt install -y php5-cgi;

Stretch:
sudo apt install -y php7.0-cgi

Buster:
sudo apt install -y php7.3-cg

Bullseye:
sudo apt install -y php7.4-cgi



.

[Scroggie]

Hi all

I've just gone through ALL of abd567 excellent instructions "How to Install dump1090-mutability on RPi"
I wasn't sure if it would be a problem since I now have Bullseye 64bit on a pi4 but thought it worth a try.
Well it was 99.9% successful!

It was at this point (adding gain control) that I hit a problem:-
BUSTER
Code:
sudo apt install php7.3-cgi

However. sudo apt install php7.4-cgi does the job nicely!


If you happen to see this Captain, you might like to add this to your instructions for gain setting :-

BULLSEYE
Code:
sudo apt update
sudo apt install php7.4-cgi


I know there are different more up to date versions but I personally like this one so it was great to get it running on a new build.

[ramimz]

Amazing, It's working great

Thank you very much.

Please visit the page linked below which has howto and scripts for automated installation of "Set-Gain" in browser / map for following 3 cases:

• Piaware SD Card image
• Raspberry Pi OS with dump1090-fa
• Raspberry Pi OS with dump1090-mutability

https://github.com/abcd567a/set-gain...ster/README.md


.

[abcd567]

Dear Abcd567, Is there a way to install Gain button and RSSI with dump1090-fa ?

Please visit the page linked below which has howto and scripts for automated installation of "Set-Gain" in browser / map for following 3 cases:

• Piaware SD Card image
• Raspberry Pi OS with dump1090-fa
• Raspberry Pi OS with dump1090-mutability

https://github.com/abcd567a/set-gain...ster/README.md




.

[ramimz]

Dear Abcd567, Is there a way to install Gain button and RSSI with dump1090-fa ?

READ & SET GAIN FROM BROWSER / DUMP1090 MAP

Last Updated: 20th July, 2018

This method is for dump1090-mutability ver 1.15~dev.

It will NOT work for PI24 / dump1090-mutability ver 1.14 ("Receiver=DVBT" setting)

OPTION-1: INDEPENDENT



OPTION-2: EMBEDDED IN MAP





STEP-1: Only Step-1 is different for Jessie, Stretch, and Buster, rest is same.

JESSIE

sudo apt update
sudo apt install php5-cgi

STRETCH

sudo apt update
sudo apt install php7.0-cgi

BUSTER

sudo apt update
sudo apt install php7.3-cgi

STEP-2:

sudo lighty-enable-mod fastcgi-php
sudo /etc/init.d/lighttpd force-reload

STEP-3:
Create a new file gain.php containing gain button, drop-down list of gains & current gain display.

3.1 - Create a new file gain.php in folder /usr/share/dump1090-mutability/html

sudo nano /usr/share/dump1090-mutability/html/gain.php

3.2 - Copy-paste following code in newly created blank file gain.php

NOTE:Code is larger than displayed. Scroll Right and Scroll Down to see these in full.
[code]
<html>
<form id="myform" action="gain.php" method="post" />
<div><font color=#ff0000 face="'Helvetica Neue', Helvetica, Arial, sans-serif">Current Gain: <?php system('cat /usr/local/sbin/gain/currentgain');?> </font></div>
<select name="gain" id="gain">
<option value=-10>-10</option>
<option value=49.6>49.6</option>
<option value=48.0>48.0</option>
<option value=44.5>44.5</option>
<option value=43.9>43.9</option>
<option value=43.4>43.4</option>
<option value=42.1>42.1</option>
<option value=40.2>40.2</option>
<option value=38.6>38.6</option>
<option value=37.2>37.2</option>
<option value=36.4>36.4</option>
<option value=33.8>33.8</option>
<option value=32.8>32.8</option>
<option value=29.7>29.7</option>
<option value=28.0>28.0</option>
<option value=25.4>25.4</option>
<option value=22.9>22.9</option>
<option value=20.7>20.7</option>
<option value=19.7>19.7</option>
<option value=16.6>16.6</option>
</select>
<input type="submit" value="Set Gain" style="color:#ffffff;background-color:#00A0E2;border-color:#00B0F0;" />
</form>
</html>
Current Gain (red) will be updated.

[abcd567]

Good morning,

is it possible to set the ppm for the RTL2838 receiver in

/etc/default/dump1090-fa

Why you want to adjust PPM? it is really not important. I never adjust PPM.

However if you want to adjust PPM, following is the procedure:

If you are using Raspberry Pi OS with package install of dump1090-fa, then do this:

sudo nano /etc/default/dump1090-fa

Scroll down to this line

# Additional options can be added here:
EXTRA_OPTIONS=""

Add your PPM's desired value n like this:
(Replace n by the number you want)

# Additional options can be added here:
EXTRA_OPTIONS="--ppm n"

Save file (Ctrl + O) and close (Ctrl + X)

Restart dump1090-fa

sudo systemctl restart dump1090-fa

If you are using piaware SD card image, do this:
In piaware sd card image, the changes you make to file "/etc/default/dump1090-fa" will be removed on reboot.

To make change stay even after reboot, use command given below (it will not work with package install).

Give following command to adjust PPM to desired value n
(Replace n by the number you want)

sudo piaware-config rtlsdr-ppm n

.

[Boxitec]

Good morning,

is it possible to set the ppm for the RTL2838 receiver in

/etc/default/dump1090-fa

[abcd567]

Uninstalled 1090-mutability, now when I try to access my Gmap says 404 not found...
????

The gmap is part of dump1090-mutability and was removed when you uninstalled dump1090-mutability, hence you can no more access it.

However you can see the dump1090-fa map at following address in your browser:

IP-of-Pi/skyaware

[AV8ORS]

The dump1090-fa was forked from dump1090-mutability. The author of both is same person (Oliver B. Jewett, in short known as obj). Function wise both are more or less the same. Appearance wise, dump1090-fa is better, as it is being maintained and improved by obj, but the dump1090-mutability is no more improved and maintained by obj.

In short, functionally, both are same, map wise dump1090-fa is better looking.


.

Uninstalled 1090-mutability, now when I try to access my Gmap says 404 not found...
????

[abcd567]

Which one is the best? Or which one is used by most apps?

The dump1090-fa was forked from dump1090-mutability. The author of both is same person (Oliver B. Jewett, in short known as obj). Function wise both are more or less the same. Appearance wise, dump1090-fa is better, as it is being maintained and improved by obj, but the dump1090-mutability is no more improved and maintained by obj.

In short, functionally, both are same, map wise dump1090-fa is better looking.


.