Take a step back.
What are you hoping to achieve. Using 30002 is only possible with a running copy of Dump1090 in --net mode.
In a windows environment that would take 2 steps. Installing and running dump1090, launching the feeder
However if you only want dump1090 like functions and have a DVBT. You chose DVBT, as this will launch dump1090 on start.
If you have an app from FA connecting to the stick first, this AVR option *may* work depending on its configuration.
If you just have the stick and want it working under windows, DVBT is the better choice without additional work involved.
Announcement
Collapse
No announcement yet.
fr24feed windows :8754 issue
Collapse
X
-
Originally posted by Oblivian View PostAlways destinationort
when i inserted :30002
that was classed as invalid port
Leave a comment:
-
thanks @Oblivian,
when i monitor my other station on raspberry pi, there is no delay or page busy on :8754
I am setting up a windows machine for another station/user but i hit some problems.
Windows machine :8754 settings
Table is blank settings are not shown, no cancel-restart-save buttons at bottom right.
Settings are ok in .ini though.
:8754 aircraft list..blank, will not change from "please wait.." f5 makes no difference to status of page.
When I run the fr24feed installer from the start , Im not sure format to insert in avr-tcp mode for port/machine
is it
<ipaddress>:30002
or
30002:<ipaddress>
or
30002/<ipaddress>
or
30002\<ipaddress>
Thanks
Mike
T-EGGP52Last edited by radiostationx; 2016-04-17, 20:01.
Leave a comment:
-
F5. The webpage is often busy. Or edit the. Ini file in notepad
Sent from my XT1092 using Tapatalk
Leave a comment:
-
fr24feed windows :8754 issue
Hi,
Just set up flightaware stick with fr24feed attached to windows 10 machine.
All went fine when installing latest zadig driver and selecting fr24feed.exe setup choice 1 receiver DVB-T stick.
Problem however accessing :8754 settings.
The settings box/table appears but no save button.
Also I wanted originally to use avr-tcp but got stuck on port/receiver type.
Can someone enlighten me how to set this on a fixed ip windows machine for avr-tcp format.
port/machine
i tried all sorts 30002/local ip
30002/localhost
30002/127.0.0.1
but no luck
Station is feeding to fr24 using choice 1 DVBT stick but I cannot access
:8754 settings ..with save settings button
:8754 aircraft list as i get message ...please wait
ThanksLast edited by radiostationx; 2016-04-17, 16:11.Tags: None
Leave a comment: