Announcement

Collapse
No announcement yet.

FR24 and 360radar setup help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • FR24 and 360radar setup help

    I have been running the software for a while now that is successfully uploading to 360radar. I would like now to be able to upload to FR24 via a windows setup. Has anyone got some working knowledge that may be able to help. I have got so far but not convinced its working. I have downloaded and installed the FR24 software and fill in the bits as suggested. I havent downloaded anything else as I assume my existing working dump1090 will be OK ?

    Capture111.JPGCapture112.JPG

    any help will be much appreciated

    thanks

  • #2
    we need to know what are you using doongle dvbt? direct connection to the router or usb?
    and what is 360radar?
    cheers

    Sent from my SM-N910F using Tapatalk

    Comment


    • #3
      Hi

      Thanks for the reply

      I am using a USB dongle whichs connects to my PC and wired router. Also using Windows 10

      dongle name - Foxnovo® DVB-T USB TV RTL-SDR FM+DAB Radio Tuner Receiver Stick Realtek RTL2832U+R820T

      360radar is a website for observing mainly military aircraft www360radarcouk ( I cant post a direct link as the forum software is stopping me )

      My data at the moment is obtained via the dump1090 and uploaded to the 360radar site. I also observe local traffic on a virtual radar server VRS

      thanks

      Comment


      • #4
        Originally posted by PaulC View Post
        Hi

        Thanks for the reply

        I am using a USB dongle whichs connects to my PC and wired router. Also using Windows 10

        dongle name - Foxnovo® DVB-T USB TV RTL-SDR FM+DAB Radio Tuner Receiver Stick Realtek RTL2832U+R820T

        360radar is a website for observing mainly military aircraft www360radarcouk ( I cant post a direct link as the forum software is stopping me )

        My data at the moment is obtained via the dump1090 and uploaded to the 360radar site. I also observe local traffic on a virtual radar server VRS

        thanks
        If you are using a separate instance of dump1090 and not the builtin with FR24 then you need to setup FR24 as AVR-TCP. Your settings show that it is trying to connect directly but since another instance of dump1090 is already running, it's won't work.
        --

        Comment


        • #5
          Got is working now - thks

          Comment


          • #6
            Great to hear that!
            --

            Comment

            Working...
            X