Announcement

Collapse
No announcement yet.

MLAT_Problem = UDP-Firewall

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • backi
    replied
    Great. Thanks. Lets wait what happens when the service is back.

    Leave a comment:


  • Oblivian
    replied
    No, as with most unless you have fully restrictive traffic rules in place the outgoing initiates the connection for return traffic so is usually authorised to do so.

    Open ports don't need to be made for incomming initiation

    Leave a comment:


  • backi
    replied
    cool, thanks. Didnt know that MLAT was suspended.
    Nevertheless, do I usually have to open/forward/unblock ports at my router that the fr24feeder is working properly?

    Leave a comment:


  • Oblivian
    replied
    I wouldn't worry about it too much until fully operational again

    http://forum.flightradar24.com/threa...ll=1#post75026

    Then can work out if its the back end being switched off, or your side unable to connect out

    Leave a comment:


  • backi
    started a topic MLAT_Problem = UDP-Firewall

    MLAT_Problem = UDP-Firewall

    Hi everyone,
    I just started with my pi feeding to fr24 and enabled MLAT. The MLAT Service is started, but variables are stating that "mlat ok = NO". Reason ist UDP-Firewall.
    Any suggestions what I need to change, that MLAT is working?
    Thanks
Working...
X