Announcement

Collapse
No announcement yet.

MLAT_Problem = UDP-Firewall

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • MLAT_Problem = UDP-Firewall

    Hi everyone,
    I just started with my pi feeding to fr24 and enabled MLAT. The MLAT Service is started, but variables are stating that "mlat ok = NO". Reason ist UDP-Firewall.
    Any suggestions what I need to change, that MLAT is working?
    Thanks

  • #2
    I wouldn't worry about it too much until fully operational again

    http://forum.flightradar24.com/threa...ll=1#post75026

    Then can work out if its the back end being switched off, or your side unable to connect out
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

    Comment


    • #3
      cool, thanks. Didnt know that MLAT was suspended.
      Nevertheless, do I usually have to open/forward/unblock ports at my router that the fr24feeder is working properly?

      Comment


      • #4
        No, as with most unless you have fully restrictive traffic rules in place the outgoing initiates the connection for return traffic so is usually authorised to do so.

        Open ports don't need to be made for incomming initiation
        Posts not to be taken as official support representation - Just a helpful uploader who tinkers

        Comment


        • #5
          Great. Thanks. Lets wait what happens when the service is back.

          Comment

          Working...
          X