Announcement

Collapse
No announcement yet.

Newbie: Aircraft tracked 0

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Lincolnshire Poacher
    replied
    These are the settings for my PI if they are of any use.

    fr24.jpg

    Leave a comment:


  • rsgomes
    replied
    I know that Dump1090 sees them by the Local IP Address (192.168.1.122) and the Dump1090 port (8080).

    Now I change the configs on feeder to "AVR-TCP" and now it's running! Thanks a lot Obvilian for your fast reply. Best regards.

    Ricardo Gomes

    Leave a comment:


  • Oblivian
    replied
    Originally posted by rsgomes View Post
    Hello!

    I have the same problem. Dump1090 detects aircrafts but in FR24Feed says this:

    FR24 Link: Connected via TCP
    FR24 Radar Code: T-LPFR2
    Aircraft Tracked (ModeS & ADS-B): 0
    Aircraft Uploaded: N/A
    Receiver: dvbt, Connected
    MLAT running: NO

    I am running FR24Feed and Dump1090 on a Raspberry Pi. Thanks in advance.

    Ricardo Gomes
    How do you know Dump1090 sees them?. And what is the feeder configured for?.

    If you have Dump1090 already running, feeder needs to be configured for AVRTCP 30002 NOT DVBT or otherwise.

    Config examples and other detection methods here http://forum.flightradar24.com/threa...-FAQs-and-Info

    Leave a comment:


  • rsgomes
    replied
    Hello!

    I have the same problem. Dump1090 detects aircrafts but in FR24Feed says this:

    FR24 Link: Connected via TCP
    FR24 Radar Code: T-LPFR2
    Aircraft Tracked (ModeS & ADS-B): 0
    Aircraft Uploaded: N/A
    Receiver: dvbt, Connected
    MLAT running: NO

    I am running FR24Feed and Dump1090 on a Raspberry Pi. Thanks in advance.

    Ricardo Gomes

    Leave a comment:


  • JamesH
    replied
    Hi Edds ,

    I'm not sure why you are not showing "Aircraft Tracked:0" but you send me a PM I would be more than happy to help you workout what the problem might be.

    James

    Leave a comment:


  • Edds103
    started a topic Newbie: Aircraft tracked 0

    Newbie: Aircraft tracked 0

    Good evening,

    I was glad to get my DVBT-receiver today. I downloaded and installed the latest Windows-software with no problems. FR24 says this:

    Flightradar24 Feeder/Decoder
    Windows/generic/i386/1.0.15-7
    Updated: 22:29:06 GMT+0100

    FR24 Link: Connected via UDP
    FR24 Radar Code: T-EDDS103
    Aircraft Tracked (ModeS & ADS-B): 0
    Aircraft Uploaded: N/A
    Receiver: dvbt, Connected
    MLAT running: N/A

    It is running since several hours. "aircraft tracked:0" is the point which bothers me.

    Any idea of helping a newbie? Thanks a lot.

    edds103
Working...
X