I posted a reply several days ago, which seems to have disappeared - it was awaiting moderation - if it was rejected, it would be nice to know why.
Anyway, this was received from Muazzam at FR24 Support and did fix my issue - I now start FR24feed then Basestation.
I can help you with that issue. It happens when Basestation is running. Now we can solve this in two ways.
A. If you don't need Basestation for anything else then shut it down and everything should start working.
B. If you need to run Basestation then please do the following.
1. Configure Basestation to connect to TCP rather than USB using the following details:
Settings-> Hardware settings-> Network-> 127.0.0.1, port 20072
2. Edit the fr24feed.ini and add the following line:
mpx=“yes”
3. Start FR24 software first so it connects to the SBS-1e over USB
4. Start Basestation that will connect to FR24 software via TCP
5. Make sure to have DATA SOURCE changed to Use Network.
Hope this helps someone.
Paul.
Announcement
Collapse
No announcement yet.
SBS-1 via USB on W10, FR24 Feed error - authentication failed, please help
Collapse
X
-
In reply to Bumpy....
If Basestation is working fine and you can see aircraft plotted and in the listing then you have not set up fr24feed correctly. The feed should connect directly to Basestation on port 30003, and you need to enable Basestation to connect to 20072 on fr24feed (set hardware settings in BS to 20072)
I am not feeding fr24 anymore as I have had trouble with it crashing under Win10, but if you search for my postings you will see a long thread in which I have listed the settings required when I had it working.
Good luck getting it all working.
Jerry
PS here is the post:-
http://forum.flightradar24.com/threa...-SBS-3-via-USBLast edited by slammer99uk; 2015-10-17, 13:27.
Leave a comment:
-
This solved the problem - credit to Muazzam @ FR24 support....
"I can help you with that issue. It happens when Basestation is running. Now we can solve this in two ways.
A. If you don't need Basestation for anything else then shut it down and everything should start working.
B. If you need to run Basestation then please do the following.
1. Configure Basestation to connect to TCP rather than USB using the following details:
Settings-> Hardware settings-> Network-> 127.0.0.1, port 20072
2. Edit the fr24feed.ini and add the following line:
mpx=“yes”
3. Start FR24 software first so it connects to the SBS-1e over USB
4. Start Basestation that will connect to FR24 software via TCP
5. Make sure to have DATA SOURCE changed to Use Network."
I used option B and now start the feed first, then connect to Basestation and I'm feeding fine, very stable and Basestation works perfectly.
I hope this fixes other people's issues too.
Cheers,
Paul.
Leave a comment:
-
Firewall is between you and the internet. Unless you have a software one (or antivir package) configured so securely that you even need to define LAN rules and applications over WAN rules, then it won't make a difference and comes down to app output configuration
Leave a comment:
-
Paul I have the same Problem but Have a Radarcape with TCP connection.
Must I define any port forwarding on my firewall? Or is this a bug in the latest version?
I also have a new router, (TC7200) from my cable provider, which could make the issue.
TH port 30003 or 20001 is connected in the status but the pipe is broken
Leave a comment:
-
SBS-1 via USB on W10, FR24 Feed error - authentication failed, please help
Hi all,
Any help gratefully received as I'm a bit stuck with this - I have tried googling plus reading through relevant looking threads in this forum, without success.
I am trying to feed from my SBS1 connected to my W10 PC via USB.
Basestation is working fine, as is PP but I cannot seem to figure out why I cannot get the fr24feed to work correctly - it was working fine in the previous version, which expired end of last month.
During the initial config stage, I am not sure what I should be putting when prompted for RAW data feed, Basestation datafeed and SBS/Basestation RAW data feed - I have tried various combinations of yes/no but this may or may not be connected with the authentication errors, below. I was originally thrown by the option to MLAT, to which I was answering yes, then not understanding why DVB-T was the only feeder device.....I now put no to the MLAT question.
Extract from log:-
2015-10-13 11:30:09 | [main][i]FR24 Feeder/Decoder [0x02107000]
2015-10-13 11:30:09 | [main][i]Version: 1.0.14-9/generic
2015-10-13 11:30:09 | [main][i]Built on Sep 7 2015 14:19:56 (r:284/Windows/i386)
2015-10-13 11:30:09 | [main][i]Copyright 2008-2015 (c) Piotr Pawluczuk
2015-10-13 11:30:09 | [main][i]Flightradar24 AB(removed)
2015-10-13 11:30:09 | [main][i]Reader 0 started
2015-10-13 11:30:09 | [time][i]Synchronizing time via NTP
2015-10-13 11:30:09 | [master][i]Starting processing thread
2015-10-13 11:30:09 | [reader][i][0]Initializing reader
2015-10-13 11:30:09 | [reader][i][0]Connecting to SBS1 receiver via USB (DEFAULT)
2015-10-13 11:30:09 | [httpd][i]Server started, listening on 0.0.0.0:8754
2015-10-13 11:30:09 | [reader][i][0]Connected to the receiver, authenticating
2015-10-13 11:30:13 | [time][i]Time synchronized correctly, offset +0.0006 seconds
2015-10-13 11:30:13 | [main][i]Feed Network client started
2015-10-13 11:30:13 | [feed][i]Downloading configuration
2015-10-13 11:30:14 | [feed][c]Interval: 5s
2015-10-13 11:30:14 | [feed][c]Latitude: <removed>
2015-10-13 11:30:14 | [feed][c]Longitude: <removed>
2015-10-13 11:30:14 | [feed][c]GND: YES
2015-10-13 11:30:14 | [feed][c]NonADSB: YES
2015-10-13 11:30:14 | [feed][c]Timestamps: optional
2015-10-13 11:30:14 | [feed][c]Max range AIR: 350.0nm
2015-10-13 11:30:14 | [feed][c]Max range GND: 100.0nm
2015-10-13 11:30:14 | [feed][i]defined 1 server
2015-10-13 11:30:14 | [feed][n]EGBN12@83.140.21.66:8099/UDP
2015-10-13 11:30:14 | [feed][n]connecting
2015-10-13 11:30:14 | [stats][i]Stats thread started
2015-10-13 11:30:26 | [reader][e][0]Authentication failed, please make sure the specified device is a SBSX-USB receiver
2015-10-13 11:30:26 | MSGS-OK: 0
2015-10-13 11:30:26 | MSGS-ER: 0
2015-10-13 11:30:31 | [reader][i][0]Connecting to SBS1 receiver via USB (DEFAULT)
2015-10-13 11:30:31 | [reader][i][0]Connected to the receiver, authenticating
2015-10-13 11:30:34 | [feed][n]connected via TCP
2015-10-13 11:30:34 | [feed][n]switching to UDP
2015-10-13 11:30:34 | [feed][n]working
2015-10-13 11:30:48 | [reader][e][0]Authentication failed, please make sure the specified device is a SBSX-USB receiver
2015-10-13 11:30:48 | MSGS-OK: 0
Many thanks in advance,
Paul.Tags: None
Leave a comment: