Unusual Data Patterns for my feed F-YGEL3

[VK6DEN]

Similar

Hi all,

Hopefully this is the correct forum to post this in, seemed appropriate.
I've had a look at my feed stat page, and noticed no solid lines of streaming anymore.
[ATTACH=CONFIG]6295[/ATTACH]

Is this normal? I've checked with the company that hosts my FR24 box and their link, but they don't see to see any issues.

Cheers,

I saw something on YABA1 which looked very similar.
The guy that owns that one is away but last time I looked it appeared ok again, go figure ??

[1090 MHz]

Seems there was a firmware update pushed the FR24 boxes since the last time I checked mine. This might explain the problem some of you guys are having... yeah reboots a good thing once in a while.

[YSWG]

FR24 do say in the PDF that the box may need rebooting from time to time. I use to get the odd gap (once or twice in a day) but so far running quite stable.

[Milliam]

The FR24 equipment I'm hosting has also started to behave similarly. My RPi feed is solid. I've advised FR24 support of this.

[F-EGLF1]

Ok, well I got the guys at YGEL airport to power cycle it, and seems to have fixed the issue. I'll keep on eye on it for the next few days.
[ATTACH=CONFIG]6313[/ATTACH]

My station (F-EGLF1) has just started to do the same today, hopefully re-booting it will sort things out.

[numloxx]

Ok, well I got the guys at YGEL airport to power cycle it, and seems to have fixed the issue. I'll keep on eye on it for the next few days.
2015-08-04 20_20_03-Flightradar24.com - Premium.png

[YSWG]

Hahah love my mobile's autocorrect feature. Hopefully something simple is the cause.

[numloxx]

Yes I am having a tech check that all the cables are not LOOSE It's a remote location for me, so am not able to do everything.
Hopefully he will not LOSE anything that drops behind the server rack

[YSWG]

Could be that the GPS plug is lose, a fault with the FR24 box, cable or antenna (GPS) has a short of some sort.

[numloxx]

So are you saying that the GPS is causing the issues with my FR24 box in Geraldton? The other posts are getting me confused.
Will a reboot of the FR24 fix this?
And no, I do not run Windows 10

[nzradar]

Any possible solution.

[ATTACH=CONFIG]6301[/ATTACH]

Looks like morse code for "Please update to Windows 10"!

[YSWG]

Sounds like an issue with the GPS antenna or the FR24 box to get that error. I think it's best to contact support.

[lexj]

I seem to have a problem since Friday 31.
I tried to change antenna and Ethernet cable.
Reset the router and the box is made.
In the software log of the box. It indicates connection problem with the GPS.
In RadarView application. Local aircraft list disappears sometimes.
Any possible solution.

Dibujo.jpg

[GitseBase]

Hi all,

I've checked with the company that hosts my FR24 box and their link, but they don't see to see any issues.

Cheers,

Could it be that their firewall is blocking the FR24 box? It looks like the connection is only alive the last +/- 15 minutes of an hour.
Can you access the FR24 box? From the logs you could find out why there is no connection.

[YSWG]

Have you rebooted the FR24 box and router? Found that it can solve some drop out issues though your graphic is almost consistent some days.

Both the Pi and FR are running pretty good *touch wood*
Screen Shot 2015-08-02 at 12.10.28 AM.png
Screen Shot 2015-08-02 at 12.10.02 AM.png