Announcement

Collapse
No announcement yet.

Archived - Beta test MLAT software for Raspberry Pi

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • I ment to remove "/run/dump1090-mutability" from
    ExecStartPre=-/bin/chown -R nobody:nogroup /run/dump1090-mutability /var/log/fr24feed /run/fr24feed /dev/shm/decoder.txt

    Comment


    • Originally posted by helios View Post
      I ment to remove "/run/dump1090-mutability" from
      I left it there.

      Comment


      • But then the fr24-directories also are owned by the user dump1090. I don't think it is neccessary for fr24feed to change the permissions of /run/dump1090-mutability; maybe only in case if there is no dedicated dump1090-mutability package installed.

        Comment


        • Originally posted by helios View Post
          But then the fr24-directories also are owned by the user dump1090. I don't think it is neccessary for fr24feed to change the permissions of /run/dump1090-mutability; maybe only in case if there is no dedicated dump1090-mutability package installed.
          And going by my tests I think thats exactly what its based on.
          Posts not to be taken as official support representation - Just a helpful uploader who tinkers

          Comment


          • Originally posted by dotsi View Post
            After the update, I'm getting this error:

            Code:
            pi@raspberrypi:~ $ sudo service fr24feed status
            ● fr24feed.service - Flightradar24 Decoder & Feeder
               Loaded: loaded (/etc/systemd/system/fr24feed.service; enabled)
               Active: active (running) since Fri 2018-01-19 16:33:12 EET; 49s ago
              Process: 674 ExecStartPre=/bin/chmod a+rwx /var/log/lighttpd (code=exited, status=0/SUCCESS)
              Process: 666 ExecStartPre=/bin/chown -R nobody:nogroup /run/dump1090-mutability /var/log/fr24feed /run/fr24feed /dev/shm/decoder.txt (code=exited, status=0/SUCCESS)
              Process: 657 ExecStartPre=/bin/touch /dev/shm/decoder.txt (code=exited, status=0/SUCCESS)
              Process: 651 ExecStartPre=/bin/mkdir -p /run/dump1090-mutability /var/log/fr24feed /run/fr24feed /var/log/lighttpd (code=exited, status=0/SUCCESS)
              Process: 594 ExecStartPre=/usr/lib/fr24/install_dump1090.sh (code=exited, status=0/SUCCESS)
             Main PID: 683 (fr24feed)
               CGroup: /system.slice/fr24feed.service
                       └─683 /usr/bin/fr24feed
            
            Jan 19 16:33:57 raspberrypi fr24feed[683]: Found 1 device(s):
            Jan 19 16:33:57 raspberrypi fr24feed[683]: 0: Realtek, RTL2838UHIDIR, SN: 00000001 (currently selected)
            Jan 19 16:33:57 raspberrypi fr24feed[683]: usb_claim_interface error -6
            Jan 19 16:33:57 raspberrypi fr24feed[683]: Error opening the RTLSDR device: Device or resource busy
            Jan 19 16:33:57 raspberrypi fr24feed[683]: 2018-01-19 16:33:57 | [reader][i]Connection terminated
            Jan 19 16:33:57 raspberrypi fr24feed[683]: 2018-01-19 16:33:57 | [main][i]Terminating child process 1352 with SIGTERM
            Jan 19 16:33:58 raspberrypi fr24feed[683]: 2018-01-19 16:33:58 | [time][i]Synchronizing time via NTP
            Jan 19 16:33:59 raspberrypi fr24feed[683]: 2018-01-19 16:33:59 | [time][e]Failed to synchronize time
            Jan 19 16:34:01 raspberrypi fr24feed[683]: 2018-01-19 16:34:01 | [time][i]Synchronizing time via NTP
            Jan 19 16:34:01 raspberrypi fr24feed[683]: 2018-01-19 16:34:01 | [time][e]Failed to synchronize time
            If you look for the USB claim error you will find it's due to being in-use already by dump1090.

            Needs restart and checking how you start it (auto/manual)
            Posts not to be taken as official support representation - Just a helpful uploader who tinkers

            Comment


            • Originally posted by Oblivian View Post
              That generally means there is a serious error and it is crashing/not currently running

              You will need to use commandline to find out why or edit the config file.

              Assuming you are on a RPi, some of the commands are outlined.. https://forum.flightradar24.com/thre...ll=1#post74851

              you can also edit
              sudo nano /etc/fr24feed.ini
              OK - issue was fr24feed was not starting. Sudo fr24feed start got it going. And changes in fr24feed.ini are reflected in <ip_of_pi>:8754/settings.html.

              I now need to manually start the fr24feed each time. So how do I fix this ??

              From the various posts - I've tried sudo service fr24feed start ( and rebooted) and also sudo systemctl restart fr24feed.

              You mentioned editing the config file. Whats it called ? so I can have a look at it.

              Thanks

              ylis

              Comment


              • Config file is for fixing bad settings, doesn't effect the start/stop.

                But from what most are experiencing there is some changes to permissions of files related to said run files.

                It's getting too tricky to fix them all so suggesting reimage and start fresh now.

                But the adjust to permissions a few posts back may help you too. Big unknowns
                Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                Comment


                • fr24feed broken (Raspberry Pi)

                  As a newby I'm not sure if this is the right topic to post.

                  However I tried to update my old Raspberry Pi and notice there was a new fr24feed.
                  But for some reason it's not going .. tried to remove and reinstall but get:

                  root@debian512pi:~# apt-get install fr24feed
                  Reading package lists... Done
                  Building dependency tree
                  Reading state information... Done
                  fr24feed is already the newest version.
                  0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
                  1 not fully installed or removed.
                  After this operation, 0 B of additional disk space will be used.
                  Do you want to continue [Y/n]? y
                  Setting up fr24feed (1.0.19-5) ...
                  /var/lib/dpkg/info/fr24feed.postinst: 35: /var/lib/dpkg/info/fr24feed.postinst: systemctl: not found
                  /var/lib/dpkg/info/fr24feed.postinst: 47: /var/lib/dpkg/info/fr24feed.postinst: systemctl: not found
                  dpkg: error processing fr24feed (--configure):
                  subprocess installed post-installation script returned error exit status 127
                  Errors were encountered while processing:
                  fr24feed
                  E: Sub-process /usr/bin/dpkg returned an error code (1)

                  Still use the old version -> PRETTY_NAME="Raspbian GNU/Linux 7 (wheezy)"
                  The apt sources.list contains -> deb <link> flightradar24 raspberrypi-stable
                  Seems I cannot mention any links ....

                  Any help how to solve this would be welcome.
                  It only goes about the fr24feed, I use the original dump1090.

                  Thanks,
                  Matthijs

                  Comment


                  • Originally posted by matthys View Post
                    As a newby I'm not sure if this is the right topic to post.

                    However I tried to update my old Raspberry Pi and notice there was a new fr24feed.
                    But for some reason it's not going .. tried to remove and reinstall but get:

                    root@debian512pi:~# apt-get install fr24feed
                    Reading package lists... Done
                    Building dependency tree
                    Reading state information... Done
                    fr24feed is already the newest version.
                    0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
                    1 not fully installed or removed.
                    After this operation, 0 B of additional disk space will be used.
                    Do you want to continue [Y/n]? y
                    Setting up fr24feed (1.0.19-5) ...
                    /var/lib/dpkg/info/fr24feed.postinst: 35: /var/lib/dpkg/info/fr24feed.postinst: systemctl: not found
                    /var/lib/dpkg/info/fr24feed.postinst: 47: /var/lib/dpkg/info/fr24feed.postinst: systemctl: not found
                    dpkg: error processing fr24feed (--configure):
                    subprocess installed post-installation script returned error exit status 127
                    Errors were encountered while processing:
                    fr24feed
                    E: Sub-process /usr/bin/dpkg returned an error code (1)

                    Still use the old version -> PRETTY_NAME="Raspbian GNU/Linux 7 (wheezy)"
                    The apt sources.list contains -> deb <link> flightradar24 raspberrypi-stable
                    Seems I cannot mention any links ....

                    Any help how to solve this would be welcome.
                    It only goes about the fr24feed, I use the original dump1090.

                    Thanks,
                    Matthijs
                    Because you didn't use SUDO

                    But it is already latest.
                    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                    Comment


                    • Originally posted by Oblivian View Post
                      Because you didn't use SUDO

                      But it is already latest.
                      Why should I use sudo when I am root?

                      Comment


                      • Originally posted by matthys View Post
                        Why should I use sudo when I am root?
                        Blame the scripted coding..

                        We're finding all sorts of issues as you can see with recent posts with permissions and methods used to install associated
                        Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                        Comment


                        • Raspberry PI - Stopped, Fixed, and broken again...

                          Hi All,

                          I've suffered the same issue as others in that my FR24FEED program stopped and caused issues, so have purged and reinstalled by following the instructions posted earlier this week, however, I have a slightly different issue related to running the program as a service. If i use SUDO SYSTEMCTL START FR24FEED, I get the following in the log file and it never connection to the server

                          Code:
                          2018-01-21 23:46:39 | [main][i]FR24 Feeder/Decoder
                          2018-01-21 23:46:39 | [main][i]Version: 1.0.19-5/generic
                          2018-01-21 23:46:39 | [main][i]Built on Jan 19 2018 10:38:52 (T201801191038/Linux/static_arm)
                          2018-01-21 23:46:39 | [main][i]Copyright 2012-2018 Flightradar24 AB
                          2018-01-21 23:46:39 | [main][i]
                          2018-01-21 23:46:39 | [main][i]DNS mode: PING
                          2018-01-21 23:46:39 | [main][i]Automatic updates are ENABLED
                          2018-01-21 23:46:39 | [httpd][i]Server started, listening on 0.0.0.0:8754
                          2018-01-21 23:46:39 | [main][i]Reader thread started
                          2018-01-21 23:46:39 | [main][i]MLAT data feed started
                          2018-01-21 23:46:39 | [master][i]Starting processing thread
                          2018-01-21 23:46:39 | [mlat][i]Waiting for MLAT configuration
                          2018-01-21 23:46:39 | [reader][i]Initializing reader
                          2018-01-21 23:46:39 | [reader][i]Connecting to AVR-TCP receiver via (avr-tcp://127.0.0.1:30002)
                          2018-01-21 23:46:39 | [reader][i]Connected to the receiver, configuring
                          2018-01-21 23:46:39 | [reader][i]Configured, processing messages
                          2018-01-21 23:46:40 | [reader][w]Setting new UTC offset: 0!
                          2018-01-21 23:46:40 | [time][i]Synchronizing time via NTP
                          2018-01-21 23:46:40 | [time][e]Failed to synchronize time
                          2018-01-21 23:46:40 | [main][w]Failed to synchronize time, waiting 5 seconds
                          2018-01-21 23:46:45 | [time][i]Synchronizing time via NTP
                          2018-01-21 23:46:46 | [time][e]Failed to synchronize time
                          2018-01-21 23:46:46 | [main][w]Failed to synchronize time, waiting 5 seconds
                          2018-01-21 23:46:51 | [time][i]Synchronizing time via NTP
                          2018-01-21 23:46:51 | [time][e]Failed to synchronize time
                          2018-01-21 23:46:51 | [main][w]Failed to synchronize time, waiting 5 seconds
                          Running FR24SERVICE shows:-

                          [ ok ] FR24 Feeder/Decoder Process: running.
                          [ ok ] FR24 Stats Timestamp: 2018-01-22 00:04:15.
                          [FAIL] FR24 Link: unknown ... failed!
                          [ ok ] Receiver: connected (1188 MSGS/0 SYNC).
                          [FAIL] FR24 MLAT: not running ... failed!

                          BUT if I run in logging mode, it appears fine:-
                          Code:
                          2018-01-22 00:05:31 | [main][i]FR24 Feeder/Decoder
                          2018-01-22 00:05:31 | [main][i]Version: 1.0.19-5/generic
                          2018-01-22 00:05:31 | [main][i]Built on Jan 19 2018 10:38:52 (T201801191038/Linux/static_arm)
                          2018-01-22 00:05:31 | [main][i]Copyright 2012-2018 Flightradar24 AB
                          2018-01-22 00:05:31 | [main][i]
                          2018-01-22 00:05:31 | [main][i]DNS mode: PING
                          2018-01-22 00:05:31 | [main][i]Automatic updates are ENABLED
                          2018-01-22 00:05:31 | [httpd][i]Server started, listening on 0.0.0.0:8754
                          2018-01-22 00:05:31 | [master][i]Starting processing thread
                          2018-01-22 00:05:31 | [main][i]Reader thread started
                          2018-01-22 00:05:31 | [reader][i]Initializing reader
                          2018-01-22 00:05:31 | [reader][i]Connecting to AVR-TCP receiver via (avr-tcp://127.0.0.1:30002)
                          2018-01-22 00:05:31 | [reader][i]Connected to the receiver, configuring
                          2018-01-22 00:05:31 | [reader][i]Configured, processing messages
                          2018-01-22 00:05:31 | [main][i]MLAT data feed started
                          2018-01-22 00:05:31 | [mlat][i]Waiting for MLAT configuration
                          2018-01-22 00:05:32 | [reader][w]Setting new UTC offset: 0!
                          2018-01-22 00:05:32 | [time][i]Synchronizing time via NTP
                          2018-01-22 00:05:51 | [time][i]Time synchronized correctly, offset -0.0004 seconds
                          2018-01-22 00:05:51 | [main][i]Feed Network client started
                          2018-01-22 00:05:51 | [feed][i]Downloading configuration
                          2018-01-22 00:05:51 | [feed][c]Interval: 5s
                          2018-01-22 00:05:51 | [feed][c]Latitude: 50.8478
                          2018-01-22 00:05:51 | [feed][c]Longitude: -1.1523
                          2018-01-22 00:05:51 | [feed][c]GND: YES
                          2018-01-22 00:05:51 | [feed][c]NonADSB: YES
                          2018-01-22 00:05:51 | [feed][c]Timestamps: optional
                          2018-01-22 00:05:51 | [feed][c]Max range AIR: 350.0nm
                          2018-01-22 00:05:51 | [feed][c]Max range GND: 100.0nm
                          2018-01-22 00:05:51 | [feed][i]defined 5 servers
                          2018-01-22 00:05:51 | [stats][i]Stats thread started
                          2018-01-22 00:05:51 | [feed][n]EGVF14@83.140.21.85:8099/UDP
                          2018-01-22 00:05:51 | [feed][n]connecting
                          2018-01-22 00:05:51 | [feed][n]connected via UDP (fd 9)
                          2018-01-22 00:05:51 | [feed][n]working
                          2018-01-22 00:05:51 | [mlat][i]MLAT configuration received, service ENABLED
                          2018-01-22 00:05:51 | [mlat][i]Starting MLAT with preconfigured position: 50.85,-1.15, 8.0
                          2018-01-22 00:05:51 | [mlat][i]MLAT bandwidth reduction active, level 1
                          2018-01-22 00:05:51 | [mlat][i]Configuring UDP connection udp://mlat-1.fr24.com:19788
                          2018-01-22 00:05:51 | [mlat][i]Registering MLAT station
                          2018-01-22 00:05:51 | [mlat][i]Registering MLAT station: SUCCESS
                          2018-01-22 00:05:52 | [feed][i]sent 1,0 AC
                          2018-01-22 00:05:53 | [mlat][i]Received ADS-B time references AC:
                          2018-01-22 00:05:53 | [mlat][i] 4CA96C
                          2018-01-22 00:05:53 | [mlat][i]Pinging the server
                          2018-01-22 00:05:53 | [mlat][i]Stats 11373197/11373197
                          2018-01-22 00:05:57 | [feed][i]sent 4,0 AC
                          2018-01-22 00:06:02 | [feed][i]sent 3,0 AC
                          I'm at a loss as to what could cause this issue as I thought they'd be using the same method?

                          The system doesn't have a firewall, and I can ping all of the NTP servers, so am really confused...

                          Thanks,
                          Chris

                          Comment


                          • Originally posted by Tayloss View Post
                            Hi All,

                            I've suffered the same issue as others in that my FR24FEED program stopped and caused issues, so have purged and reinstalled by following the instructions posted earlier this week, however, I have a slightly different issue related to running the program as a service. If i use SUDO SYSTEMCTL START FR24FEED, I get the following in the log file and it never connection to the server

                            Code:
                            2018-01-21 23:46:39 | [main][i]FR24 Feeder/Decoder
                            2018-01-21 23:46:39 | [main][i]Version: 1.0.19-5/generic
                            2018-01-21 23:46:39 | [main][i]Built on Jan 19 2018 10:38:52 (T201801191038/Linux/static_arm)
                            2018-01-21 23:46:39 | [main][i]Copyright 2012-2018 Flightradar24 AB
                            2018-01-21 23:46:39 | [main][i]
                            2018-01-21 23:46:39 | [main][i]DNS mode: PING
                            2018-01-21 23:46:39 | [main][i]Automatic updates are ENABLED
                            2018-01-21 23:46:39 | [httpd][i]Server started, listening on 0.0.0.0:8754
                            2018-01-21 23:46:39 | [main][i]Reader thread started
                            2018-01-21 23:46:39 | [main][i]MLAT data feed started
                            2018-01-21 23:46:39 | [master][i]Starting processing thread
                            2018-01-21 23:46:39 | [mlat][i]Waiting for MLAT configuration
                            2018-01-21 23:46:39 | [reader][i]Initializing reader
                            2018-01-21 23:46:39 | [reader][i]Connecting to AVR-TCP receiver via (avr-tcp://127.0.0.1:30002)
                            2018-01-21 23:46:39 | [reader][i]Connected to the receiver, configuring
                            2018-01-21 23:46:39 | [reader][i]Configured, processing messages
                            2018-01-21 23:46:40 | [reader][w]Setting new UTC offset: 0!
                            2018-01-21 23:46:40 | [time][i]Synchronizing time via NTP
                            2018-01-21 23:46:40 | [time][e]Failed to synchronize time
                            2018-01-21 23:46:40 | [main][w]Failed to synchronize time, waiting 5 seconds
                            2018-01-21 23:46:45 | [time][i]Synchronizing time via NTP
                            2018-01-21 23:46:46 | [time][e]Failed to synchronize time
                            2018-01-21 23:46:46 | [main][w]Failed to synchronize time, waiting 5 seconds
                            2018-01-21 23:46:51 | [time][i]Synchronizing time via NTP
                            2018-01-21 23:46:51 | [time][e]Failed to synchronize time
                            2018-01-21 23:46:51 | [main][w]Failed to synchronize time, waiting 5 seconds
                            Running FR24SERVICE shows:-

                            [ ok ] FR24 Feeder/Decoder Process: running.
                            [ ok ] FR24 Stats Timestamp: 2018-01-22 00:04:15.
                            [FAIL] FR24 Link: unknown ... failed!
                            [ ok ] Receiver: connected (1188 MSGS/0 SYNC).
                            [FAIL] FR24 MLAT: not running ... failed!

                            BUT if I run in logging mode, it appears fine:-
                            Code:
                            2018-01-22 00:05:31 | [main][i]FR24 Feeder/Decoder
                            2018-01-22 00:05:31 | [main][i]Version: 1.0.19-5/generic
                            2018-01-22 00:05:31 | [main][i]Built on Jan 19 2018 10:38:52 (T201801191038/Linux/static_arm)
                            2018-01-22 00:05:31 | [main][i]Copyright 2012-2018 Flightradar24 AB
                            2018-01-22 00:05:31 | [main][i]
                            2018-01-22 00:05:31 | [main][i]DNS mode: PING
                            2018-01-22 00:05:31 | [main][i]Automatic updates are ENABLED
                            2018-01-22 00:05:31 | [httpd][i]Server started, listening on 0.0.0.0:8754
                            2018-01-22 00:05:31 | [master][i]Starting processing thread
                            2018-01-22 00:05:31 | [main][i]Reader thread started
                            2018-01-22 00:05:31 | [reader][i]Initializing reader
                            2018-01-22 00:05:31 | [reader][i]Connecting to AVR-TCP receiver via (avr-tcp://127.0.0.1:30002)
                            2018-01-22 00:05:31 | [reader][i]Connected to the receiver, configuring
                            2018-01-22 00:05:31 | [reader][i]Configured, processing messages
                            2018-01-22 00:05:31 | [main][i]MLAT data feed started
                            2018-01-22 00:05:31 | [mlat][i]Waiting for MLAT configuration
                            2018-01-22 00:05:32 | [reader][w]Setting new UTC offset: 0!
                            2018-01-22 00:05:32 | [time][i]Synchronizing time via NTP
                            2018-01-22 00:05:51 | [time][i]Time synchronized correctly, offset -0.0004 seconds
                            2018-01-22 00:05:51 | [main][i]Feed Network client started
                            2018-01-22 00:05:51 | [feed][i]Downloading configuration
                            2018-01-22 00:05:51 | [feed][c]Interval: 5s
                            2018-01-22 00:05:51 | [feed][c]Latitude: 50.8478
                            2018-01-22 00:05:51 | [feed][c]Longitude: -1.1523
                            2018-01-22 00:05:51 | [feed][c]GND: YES
                            2018-01-22 00:05:51 | [feed][c]NonADSB: YES
                            2018-01-22 00:05:51 | [feed][c]Timestamps: optional
                            2018-01-22 00:05:51 | [feed][c]Max range AIR: 350.0nm
                            2018-01-22 00:05:51 | [feed][c]Max range GND: 100.0nm
                            2018-01-22 00:05:51 | [feed][i]defined 5 servers
                            2018-01-22 00:05:51 | [stats][i]Stats thread started
                            2018-01-22 00:05:51 | [feed][n]EGVF14@83.140.21.85:8099/UDP
                            2018-01-22 00:05:51 | [feed][n]connecting
                            2018-01-22 00:05:51 | [feed][n]connected via UDP (fd 9)
                            2018-01-22 00:05:51 | [feed][n]working
                            2018-01-22 00:05:51 | [mlat][i]MLAT configuration received, service ENABLED
                            2018-01-22 00:05:51 | [mlat][i]Starting MLAT with preconfigured position: 50.85,-1.15, 8.0
                            2018-01-22 00:05:51 | [mlat][i]MLAT bandwidth reduction active, level 1
                            2018-01-22 00:05:51 | [mlat][i]Configuring UDP connection udp://mlat-1.fr24.com:19788
                            2018-01-22 00:05:51 | [mlat][i]Registering MLAT station
                            2018-01-22 00:05:51 | [mlat][i]Registering MLAT station: SUCCESS
                            2018-01-22 00:05:52 | [feed][i]sent 1,0 AC
                            2018-01-22 00:05:53 | [mlat][i]Received ADS-B time references AC:
                            2018-01-22 00:05:53 | [mlat][i] 4CA96C
                            2018-01-22 00:05:53 | [mlat][i]Pinging the server
                            2018-01-22 00:05:53 | [mlat][i]Stats 11373197/11373197
                            2018-01-22 00:05:57 | [feed][i]sent 4,0 AC
                            2018-01-22 00:06:02 | [feed][i]sent 3,0 AC
                            I'm at a loss as to what could cause this issue as I thought they'd be using the same method?

                            The system doesn't have a firewall, and I can ping all of the NTP servers, so am really confused...

                            Thanks,
                            Chris
                            Just another quirk to add to the list.

                            Assuming you ran all the bash scripts/install commands as sudo it may need the service command permission changed - *think* the command structure below is correct
                            FR24feed Not auto-starting on reboot
                            - Not sure why/not enough info provided to pinpoint cause or fix
                            - poss owner of run service string
                            sudo chown root:root /etc/systemd/system/fr24feed.service
                            Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                            Comment


                            • Originally posted by Oblivian View Post
                              Just another quirk to add to the list.

                              Assuming you ran all the bash scripts/install commands as sudo it may need the service command permission changed - *think* the command structure below is correct
                              Yes, everything was run as SUDO and have checked the /etc/system.d/system directory and can see that the fr24feed service already has root privilege..

                              -rw-r--r-- 1 root root 621 Jan 19 10:39 fr24feed.service

                              I did check the permissions before posting, but even as a normal user, it should have internet access on all ports and addresses..

                              Does seems to be challenging since the upgrade..

                              Thanks for your help tho..

                              Chris

                              Comment


                              • Originally posted by Tayloss View Post
                                Yes, everything was run as SUDO and have checked the /etc/system.d/system directory and can see that the fr24feed service already has root privilege..

                                -rw-r--r-- 1 root root 621 Jan 19 10:39 fr24feed.service

                                I did check the permissions before posting, but even as a normal user, it should have internet access on all ports and addresses..

                                Does seems to be challenging since the upgrade..

                                Thanks for your help tho..

                                Chris
                                I'd provide a server to manually check, but they differ by region being CDN front end.

                                Sent from my XT1092 using Tapatalk
                                Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                                Comment

                                Working...
                                X