Archived - Beta test MLAT software for Raspberry Pi

[Kemistry]

Version 16-7 enables ground vehicles to be sent for T- feeders (but curiously not all of them??) - great news !!

[Dundee]

Any changelog of new version 1.0.16-7?

[F450]

MLAT disabled

Volunteer MLAT was temporarily disabled for technical reasons, it will be enabled back as soon as possible.

Hmmm....i like to ask you one more question:

Actual enabled and now like to know if it is possible to see the MLAT detected plane's on my browserscreen ???

thx info
herbert

[F450]

Great..Thanks
BTW...have replaced the koax feed to my ADS-B Antenna.... now more plane's transfered )

Herbert
T-EDQG9

[piopawlu]

then i made the reconfigure procceed with mlat "yes" = always the same message
Any Idea ??

thx any information
herbert

Volunteer MLAT was temporarily disabled for technical reasons, it will be enabled back as soon as possible.

[F450]

Hello,

a couple of day's before MLAT works BUT Now following is seen if reading out the monitor.txt

last_rx_connect_time_s="2015-12-11 17:14:49"
local_tods="24654"
mlat-ok="NOT-PERMITTED"
mlat-started="FINISHED"
mlat_problem="mlat-disabled"

have done nothing !

then i made the reconfigure procceed with mlat "yes" = always the same message
Any Idea ??

thx any information
herbert

[phg]

Hi all!

I got a strange issue.
After ~1day no planes are seen.

The fr24 service restarts by cron every night, but this does not help.
A complete reboot of my PI fixes the problem.

Any ideas how to debug this?

It suddenly "stops":

2015-12-01 00:12:23 | [mlat][i]Stats 251525/86
2015-12-01 00:12:25 | [feed][i]sent 1 AC in 1 packet
2015-12-01 00:12:30 | [feed][i]sent 1 AC in 1 packet
2015-12-01 00:12:36 | [feed][i]sent 1 AC in 1 packet
2015-12-01 00:12:43 | [mlat][i]Pinging the server
2015-12-01 00:12:43 | [mlat][i]Stats 251525/0
2015-12-01 00:13:03 | [mlat][i]Pinging the server
2015-12-01 00:13:03 | [mlat][i]Stats 251525/0
2015-12-01 00:13:06 | [feed][n]ping 1
2015-12-01 00:13:23 | [mlat][i]Pinging the server
2015-12-01 00:13:23 | [mlat][i]Stats 251525/0
2015-12-01 00:13:36 | [feed][n]ping 2
2015-12-01 00:13:44 | [mlat][i]Pinging the server
2015-12-01 00:13:44 | [mlat][i]Stats 251525/0
2015-12-01 00:14:03 | [mlat][i]Pinging the server
2015-12-01 00:14:03 | [mlat][i]Stats 251525/0
2015-12-01 00:14:06 | [feed][n]ping 3
2015-12-01 00:14:23 | [mlat][i]Pinging the server
2015-12-01 00:14:23 | [mlat][i]Stats 251525/0
2015-12-01 00:14:36 | [feed][n]ping 4
2015-12-01 00:14:43 | [mlat][i]Pinging the server
2015-12-01 00:14:44 | [mlat][i]Stats 251525/0
2015-12-01 00:15:03 | [mlat][i]Pinging the server
2015-12-01 00:15:03 | [mlat][i]Stats 251525/0
2015-12-01 00:15:06 | [feed][n]ping 5
2015-12-01 00:15:23 | [mlat][i]Pinging the server
2015-12-01 00:15:23 | [mlat][i]Stats 251525/0

Thanks!

Philipp

[phg]

sudo bash -c "$(wget -O - http***//repo.feed.**flightradar24.***/install_fr24_rpi.sh)"

Thanks! I'll try that!

[Kpin]

Hi all!

The feed overview in my account shows an update: #232
How can I update my PI?

thanks

phg

sudo bash -c "$(wget -O - http://repo.feed.flightradar24.com/install_fr24_rpi.sh)"

[phg]

Hi all!

The feed overview in my account shows an update: #232
How can I update my PI?

thanks

phg

We do plan to publish tgz with the next release.

[Delekhan]

Is there a non Debian *.tgz available anywhere? On the feed page I can only find a link to the old 1.0.13 version.

[phg]

Hi all!

I've installed the fr24feeder on my Paspbery Pi 2 B.
Configuration etc is done

I see no errors but with "sudo service fr24feed status" I get the follwoing output:

pi@rpphg ~ $ sudo service fr24feed status
● fr24feed.service - LSB: Flightradar24 Decoder & Feeder
Loaded: loaded (/etc/init.d/fr24feed)
Active: active (running) since So 2015-11-15 21:53:15 CET; 7s ago
Process: 2688 ExecStop=/etc/init.d/fr24feed stop (code=exited, status=0/SUCCESS)
Process: 2780 ExecStart=/etc/init.d/fr24feed start (code=exited, status=0/SUCCESS)
CGroup: /system.slice/fr24feed.service
├─2796 /usr/bin/fr24feed -- --monitor-file=/dev/shm/fr24feed.txt --write-...
└─2816 /usr/lib/fr24/dump1090 --raw

Nov 15 21:53:15 rpphg fr24feed[2780]: Starting FR24 feeder: fr24feed.
Nov 15 21:53:15 rpphg systemd[1]: Started LSB: Flightradar24 Decoder & Feeder.

It seem's that there's something wrong or missing.
Any ideas?

thanks!

phg

[yuvadm]

Ah! Success with the following command line:

fr24feed --fr24key=abcd --host=example.com:30002 --receiver=avr-tcp

Just as some background on my setup, I'm running dump1090 on a very lightweight OpenWRT device (https://blog.y3xz.com/blog/2014/04/2...dar24-dot-com/) so there's currently no way for me to run the FR24 client on the same device, I have to run it off another host and pull the data over TCP.

Thanks for the help!

[Oblivian]

If the hosting device is running dump1090, the client (Im assuming you are talking running on a separate windows PC here? - why not run it on the Pi too?) needs to use the raw out (avrtcp) of dump1090 from port 30002