Archived - Beta test MLAT software for Raspberry Pi

[brito03]

It start to work at 19H00 (UTC).
Before my first post I tryed reboots of pi, of fr24feed only, then with no action made from myself it start to work for himself.
It's my first days with Pi (and Linux).

[milair]

Sometimes I find you need to completely shut down the Pi (sudo shutdown -h now) remove the power and restart. Sometimes I still need to restart the FR24 software from within the control panel @ :8754.
In fact as I am writing this I found although I was still online there were no aircraft being decoded - it appeared that dump1090 had stopped working as VRS on port 30003 showed nothing. Also viewing Dump1090 output direct at 8080 brought up an error webpage.

pi@raspberrypi ~ $ service fr24feed status
[ ok ] FR24 Feeder/Decoder Process: running.
[ ok ] FR24 Stats Timestamp: 2015-12-21 19:45:36.
[ ok ] FR24 Link: connected [UDP].
[ ok ] FR24 Radar: T-EGMC14.
[ ok ] FR24 Tracked AC: 32.
[ ok ] Receiver: connected (44 MSGS/0 SYNC).
[ ok ] FR24 MLAT: ok [UDP].
[ ok ] FR24 MLAT AC seen: 0.

So I thought I'd try:

pi@raspberrypi ~ $ killall dump1090
dump1090(5278): Operation not permitted
dump1090: no process found
pi@raspberrypi ~ $ dump1090 --net --net-http-port 8080
-bash: dump1090: command not found

But strangely even though it says command not found all has started working again.

I have no idea where Dump1090 lives - it's not in the root directory and I have no ideas ??

Anyone help ??

John

[brito03]

I also got this error after rebooting. It will solve itself after a few minutes, I have no explanation why it is like this...

I have the error since the reboot. 5 hours ago...

[patrick1501]

I also got this error after rebooting. It will solve itself after a few minutes, I have no explanation why it is like this...

[brito03]

Hi,

I have set my pi working yesterday and all goes fine, today i need to made a restart and since then i receive [FAIL] FR24 Link: Connecting... failed!

I have already setup feed24 and still the same error.
Anyone can help?

Thanks

[milair]

Update seems to have done the trick - got past 07:00 without any problems.

John

[milair]

Just ran:

sudo bash -c "$(wget -O - http://repo.feed.flightradar24.com/install_fr24_rpi.sh)"

And all seems to be working again ... Let's see what happens at 0700UTC tomorrow

John

[milair]

Off topic: I once played snooker in Chelmsford against a Brian Morgan. Ali Carter is local too, right?

Yes, he has a Snooker Club here I believe.

John

[acid-drop]

mine is also stopping around 7am every morning
already 3 days in a row

I just upgrade to the latest release to test

[Kpin]

Phew - sorry I missed the other forum posts - hope they fix soon

John

Off topic: I once played snooker in Chelmsford against a Brian Morgan. Ali Carter is local too, right?

[milair]

Yes, We all have that problem. http://forum.flightradar24.com/threa...nge-radar-down
Support alerted.

Phew - sorry I missed the other forum posts - hope they fix soon

John

[Kpin]

Hi Guys,

Might be getting paranoid over nothing - my RPi stopped working at 0700 on Tuesday. I rebooted it last night and all worked fine but I just checked and it stopped feeding again today at 0702.

I'm at work so unable to reboot again - any one else had this problem ?

John

Yes, We all have that problem. http://forum.flightradar24.com/threa...nge-radar-down
Support alerted.

[milair]

Hi Guys,

Might be getting paranoid over nothing - my RPi stopped working at 0700 on Tuesday. I rebooted it last night and all worked fine but I just checked and it stopped feeding again today at 0702.

I'm at work so unable to reboot again - any one else had this problem ?

John

[Dundee]

where did you learn about the new version?

by typing apt-get update / upgrade
visit http://repo.feed.flightradar24.com
http://feed.flightradar24.com/

[Kpin]

Any changelog of new version 1.0.16-7?

where did you learn about the new version?