Announcement

Collapse
No announcement yet.

Help Setting Up Flightradar24 Software

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • wildthing01
    replied
    Hello everybody,
    Hello abcd567, ra_br, oblivian, wiedehopf,

    my feeding software is working again. I have set up a new SD card. The old SD card was broken and I was unable to make any changes to the feed software.

    Thanks to all who helped me getting the software to work.

    Thank you for your nice training. I have to deal more with the commands in the future.


    Best regards
    wildthing01

    Leave a comment:


  • wiedehopf
    replied
    Originally posted by wildthing01 View Post
    Yes, I have problems with simple commands.
    I am sorry that I have to deal with you today.
    Many thanks for the help.
    Don't be discouraged by my comment, it's just that the command didn't do what was intended, as such just wanted to remark that you should try again

    Typing commands one doesn't fully understand is hard, humans are not good at typing out an exact copy of a line.
    I'm sure the problem will be solved in no time!

    Regards from the north-west bit of Bavaria!

    Leave a comment:


  • abcd567
    replied
    Originally posted by wiedehopf View Post
    You seem to have problems executing simple commands
    The previous output of this command indicates that you typed it wrong.
    Using Ctrl-C to copy the command and pasting it with a right click in putty is recommended.
    Originally posted by wildthing01 View Post
    Yes, I have problems with simple commands.

    How To Access and Control RPi from Desktop/Laptop using SSH
    Scroll down to: 3 - How To Copy-Paste Text To / From PuTTY

    How to Copy-Paste To or From PuTTY.png

    Leave a comment:


  • wildthing01
    replied
    sorry

    Yes, I have problems with simple commands.
    I am sorry that I have to deal with you today.
    Many thanks for the help.
    Will work on the problem tonight.
    I will tell you later.

    Best regards from Berlin

    Leave a comment:


  • wiedehopf
    replied
    You seem to have problems executing simple commands

    Try again:
    Code:
    sudo mount -o remount,rw /
    The previous output of this command indicates that you typed it wrong.
    Using Ctrl-C to copy the command and pasting it with a right click in putty is recommended.

    After this command has worked, you should be able to change the settings.
    If you can't, it's likely your sd-card corrupted and you might need a new one.

    Leave a comment:


  • wildthing01
    replied
    the settings can not be changed.
    the setup is locked

    What am I doing wrong?

    Leave a comment:


  • wildthing01
    replied
    Error reading lock file /etc/.fr24feed.ini.swp: Not enough data read

    Leave a comment:


  • wildthing01
    replied
    the settings can not be saved.

    Leave a comment:


  • abcd567
    replied
    Originally posted by wildthing01 View Post
    my USB Receiver

    Mini Digital USB2.0 TV Stick SDR Tuner Receiver DVBT DAB FM RTL2832U+R820T2 C7E7

    Always jump back to AVR (TCP)
    The setting AVR (TCP) is default, that is why it jumps to it, but this setting is known to create feeding issue, and that is why we suggested to change it to ModeS Beast (TCP).

    After changing setting, you have to click Save button, then click Restart button. Both buttons are at bottom-right of settings page. If you dont Save & Restart, your changes will be lost and setting will remain AVR(TCP).
    Last edited by abcd567; 2019-10-10, 12:30.

    Leave a comment:


  • abcd567
    replied
    Originally posted by wildthing01 View Post
    Usage:
    mount [-lhV]
    mount -a [options]
    mount [options] [--source] <source> | [--target] <directory>
    mount [options] <source> <directory>
    mount <operation> <mountpoint> [<target>]

    Mount a filesystem.
    ... ... ...
    ... ... ...
    ... ... ...
    For more details see mount(8).
    There was no need to post this detail. We all know what mount command does.

    I told you to issue the command "sudo mount -o remount,rw /" because you said you cannot change settings. The fr24feed sometimes mounts as "read-only file system" preventing any changes to config. The above command simply remounts the system as "read and write" to enable change of settings.

    Leave a comment:


  • wildthing01
    replied
    my USB Receiver

    Mini Digital USB2.0 TV Stick SDR Tuner Receiver DVBT DAB FM RTL2832U+R820T2 C7E7

    Always jump back to AVR (TCP)

    Leave a comment:


  • abcd567
    replied
    Can you please post screenshot of status page
    IP-of-Pi:8754

    It will show if the feeder is working (Aircrafts uploaded)

    Screenshot_20191010-075629_Chrome.jpg

    Leave a comment:


  • wiedehopf
    replied
    You haven't answered, why can't you change it to beast-tcp?

    Which receiver are you using?

    Leave a comment:


  • wildthing01
    replied
    Usage:
    mount [-lhV]
    mount -a [options]
    mount [options] [--source] <source> | [--target] <directory>
    mount [options] <source> <directory>
    mount <operation> <mountpoint> [<target>]

    Mount a filesystem.

    Options:
    -a, --all mount all filesystems mentioned in fstab
    -c, --no-canonicalize don't canonicalize paths
    -f, --fake dry run; skip the mount(2) syscall
    -F, --fork fork off for each device (use with -a)
    -T, --fstab <path> alternative file to /etc/fstab
    -i, --internal-only don't call the mount.<type> helpers
    -l, --show-labels show also filesystem labels
    -n, --no-mtab don't write to /etc/mtab
    -o, --options <list> comma-separated list of mount options
    -O, --test-opts <list> limit the set of filesystems (use with -a)
    -r, --read-only mount the filesystem read-only (same as -o ro)
    -t, --types <list> limit the set of filesystem types
    --source <src> explicitly specifies source (path, label, uuid)
    --target <target> explicitly specifies mountpoint
    -v, --verbose say what is being done
    -w, --rw, --read-write mount the filesystem read-write (default)

    -h, --help display this help and exit
    -V, --version output version information and exit

    Source:
    -L, --label <label> synonym for LABEL=<label>
    -U, --uuid <uuid> synonym for UUID=<uuid>
    LABEL=<label> specifies device by filesystem label
    UUID=<uuid> specifies device by filesystem UUID
    PARTLABEL=<label> specifies device by partition label
    PARTUUID=<uuid> specifies device by partition UUID
    <device> specifies device by path
    <directory> mountpoint for bind mounts (see --bind/rbind)
    <file> regular file for loopdev setup

    Operations:
    -B, --bind mount a subtree somewhere else (same as -o bind)
    -M, --move move a subtree to some other place
    -R, --rbind mount a subtree and all submounts somewhere else
    --make-shared mark a subtree as shared
    --make-slave mark a subtree as slave
    --make-private mark a subtree as private
    --make-unbindable mark a subtree as unbindable
    --make-rshared recursively mark a whole subtree as shared
    --make-rslave recursively mark a whole subtree as slave
    --make-rprivate recursively mark a whole subtree as private
    --make-runbindable recursively mark a whole subtree as unbindable

    For more details see mount(8).

    Leave a comment:


  • wildthing01
    replied
    My receiver is fine (see here)

    pi@raspberrypi:~ $ fr24feed-status
    [ ok ] FR24 Feeder/Decoder Process: running.
    [ ok ] FR24 Stats Timestamp: 2019-10-10 11:25:03.
    [ ok ] FR24 Link: connected [UDP].
    [ ok ] FR24 Radar: T-EDDB165.
    [ ok ] FR24 Tracked AC: 3.
    [ ok ] Receiver: connected (56401 MSGS/0 SYNC).
    [FAIL] FR24 MLAT: not running ... failed!


    Update I have done.

    Feeding software is still not running

    Leave a comment:

Working...
X