Announcement

Collapse
No announcement yet.

Help Setting Up Flightradar24 Software

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    Nope. That is for basic MLAT with some other software/private networks I believe. The use of it in the FR24feed sense is ignored - used to connect to stick. Send ADSB data only.

    The servers do the rest. But MLAT can only be produced from the F- boxes with GPS data attached. Other non usable data/information from DVB feeders is ignored.
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

    Comment


    • #47
      And no sooner to I say that..

      http://forum.flightradar24.com/threa...8021#post68021
      Posts not to be taken as official support representation - Just a helpful uploader who tinkers

      Comment


      • #48
        Originally posted by k9act View Post
        Problem solved.

        As per Nisbo's posting on the PP thread I changed the following:

        In set up I said no to the questions about raw data and base station.

        I added --net to the dump1090 arguments

        In ADSBscope I choose Port 30002 for RDC (nothing new there)
        and what made it work was selection Beast as the decoder instead of the obvious dongal choice.

        I have no idea what any of this means or why it now works but I am probably too old to learn.

        Thanks for the help,

        Jack
        --net that worked for me too, Thanks alot !!!

        Comment


        • #49
          I have to admit my hardest time was ssh into the Pi shell. I cannot express how important to type exactly and watch your spaces

          Comment


          • #50
            how can i restart the setup wizard ?

            Comment


            • #51
              flyingLunchbox:

              To reconfigure only
              Code:
              fr24feed --reconfigure
              To signup and reconfigure
              Code:
              fr24feed --signup
              Last edited by abcd567; 2019-07-17, 22:24.

              Comment


              • #52
                Hello everybody,

                I've tried so hard to set up the FR24 software for feeding, but I can not get it to work. Can someone help me with the installation of the FR24 software on my Rasberry Pi 2? The software I have already copied to an SD card and the software also starts. The DVBT stick is also recognized. I do not know where to enter my access data?

                Many Thanks
                Nils

                Comment


                • #53
                  wildthing01:

                  Which OS you have installed?

                  PI24 image downloaded from https://www.flightradar24.com/build-your-own

                  OR

                  Raspbian image downloaded from https://www.raspberrypi.org/downloads/raspbian/

                  Comment


                  • #54
                    Hello everybody,

                    many thanks for the help. I downloaded the software from Fligthradar24. The feeding software seems to work, but the software does not feed the data into the internet
                    My question: What am I doing wrong? Are the parameters / entries not entered correctly? (see attached photo)
                    What am I doing wrong. Can someone help me get the feeding software to work?

                    Best regards
                    Nils20190902_124637.jpg

                    Comment


                    • #55
                      Originally posted by wildthing01 View Post
                      Hello everybody,

                      many thanks for the help. I downloaded the software from Fligthradar24. The feeding software seems to work, but the software does not feed the data into the internet
                      My question: What am I doing wrong? Are the parameters / entries not entered correctly? (see attached photo)
                      What am I doing wrong. Can someone help me get the feeding software to work?

                      Best regards
                      Nils[ATTACH=CONFIG]11046[/ATTACH]
                      Does not appear so

                      sudo fr24feed --signup

                      Re-enter same details as before.
                      Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                      Comment


                      • #56
                        After running the signup, you'll need to restart fr24:

                        sudo systemctl restart fr24feed

                        I suspect you'll have to look up how to use putty/ssh, it is described here:
                        https://forum.flightradar24.com/thre...l=1#post121506
                        Last edited by wiedehopf; 2019-09-02, 11:35.

                        Comment


                        • #57
                          The system tells me that my email address is wrong. Earlier on the Windows feeding software I logged in with the same email address.
                          What am I doing wrong?
                          I'm sorry for the questions to the forum.
                          20190902_142915.jpg

                          Comment


                          • #58
                            Leave the prompt for the sharing key empty.

                            You will then get a new sharing key.
                            Old sharing keys often cause problems.

                            Comment


                            • #59
                              Hello,

                              The feeding software now seems to be fully configured
                              Except for a few minor misunderstandings.
                              How do I get the software to feed.
                              with the command:
                              sudo service fr24feed start
                              Do not start feeding?
                              Can someone help me please? or is it enough if I restart the Raspberry?

                              Many thanks in advance for your reply

                              Comment


                              • #60
                                Don't type start, type restart!

                                sudo systemctl restart fr24feed

                                Anyway you can also reboot the RPi.

                                Also consider upgrading dump1090, fr24 is by default using a very old version.
                                https://github.com/wiedehopf/adsb-sc...for-dump1090fa

                                Comment

                                Working...
                                X