Announcement

Collapse
No announcement yet.

Help Setting Up Flightradar24 Software

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • abcd567
    replied
    wildthing01

    Please issue following command, then again try to change setting.

    Code:
    sudo mount -o remount,rw /
    If you are making changes through browser (ip-of-pi:8754/settings.html), then after issueing above command, reload the browser (Ctrl+F5).
    Last edited by abcd567; 2019-10-10, 11:16.

    Leave a comment:


  • wiedehopf
    replied
    What version are you at:

    fr24feed --version

    Also which receiver are you using that can't do beast-tcp?
    Aren't you using dump1090?

    Leave a comment:


  • wildthing01
    replied
    Hello Captain,

    Receiver can not be changed to Mode S Best (TCP)

    Leave a comment:


  • abcd567
    replied
    Now I dont have latest version in Armbian Repo

    pi@orangepipc:~$ sudo apt update

    pi@orangepipc:~$ apt-cache policy fr24feed
    fr24feed:
    Installed: 1.0.23-8
    Candidate: 1.0.23-8

    I think I should do this:

    sudo bash -c "$(wget -O - https://repo-feed.flightradar24.com/install_fr24_rpi.sh)"

    EDIT:
    Instead of bash command, used this:

    Code:
    pi@orangepipc:~$ wget http://repo.feed.flightradar24.com/rpi_binaries/fr24feed_1.0.24-4_armhf.deb
    
    pi@orangepipc:~$ sudo dpkg -i fr24feed_1.0.24-4_armhf.deb
    
    
    pi@orangepipc:~$ apt-cache policy fr24feed                  fr24feed:                                                     
      Installed: 1.0.24-4
      Candidate: 1.0.24-4
      Version table:
     *** 1.0.24-4 100
            100 /var/lib/dpkg/status
    
    pi@orangepipc:~$ sudo systemctl restart fr24feed
    pi@orangepipc:~$ fr24feed-status
    [ ok ] FR24 Feeder/Decoder Process: running.
    [ ok ] FR24 Stats Timestamp: 2019-10-10 10:46:50.
    [ ok ] FR24 Link: connected [UDP].
    [ ok ] FR24 Radar: T-CYYZ30.
    [ ok ] FR24 Tracked AC: 66.
    [ ok ] Receiver: connected (2929 MSGS/0 SYNC).
    [ ok ] FR24 MLAT: ok [UDP].
    [ ok ] FR24 MLAT AC seen: 64.
    Last edited by abcd567; 2019-10-10, 10:54.

    Leave a comment:


  • wiedehopf
    replied
    Yeah beast-tcp has less issues.
    Do as described above.

    Also update fr24feed:

    sudo apt update
    sudo apt upgrade
    sudo reboot

    Leave a comment:


  • abcd567
    replied
    wildthing01

    Method-1
    Issue this command
    sudo nano /etc/fr24feed.ini

    Above command will open the file fr24feed.ini. In this file make following 2 changes:
    (1) change
    receiver="avr-tcp"
    to
    receiver="beast-tcp"

    (2) change
    host="127.0.0.1:30002"
    to
    host="127.0.0.1:30005"


    After changes are done, press Ctrl+o keys to save, then Ctrl+x keys to close.

    Now restart fr24feed
    sudo systemctl restart fr24feed

    ALTERNATIVE Method
    In your browser go to following address:

    IP-of-Pi:8754/settings.html

    Change settings to make them as in the screenshot below.
    After changes are done, click Save button, then Restart button.
    Both these buttons are at bottom-right of settings page.

    fr24feed setting BEAST-TCP using dump1090-fa or dump1090-mut v1.15.png
    Last edited by abcd567; 2019-10-10, 10:00.

    Leave a comment:


  • wildthing01
    replied
    Okay Thanks Wiedehopf

    pi@raspberrypi:~ $ cat /etc/fr24feed.ini
    receiver="avr-tcp"
    fr24key="24325b69be02a584"
    host="127.0.0.1:30002"
    bs="no"
    raw="no"
    logmode="0"
    logpath="/var/log"
    mlat="yes"
    mlat-without-gps="yes"

    Leave a comment:


  • wiedehopf
    replied
    It's a command, you put it on the console to execute.
    Then you show the output.

    Leave a comment:


  • wildthing01
    replied
    Hello Wiedehopf,

    I do not understand exactly, what should I do now)
    post cat /etc/fr24feed.ini. Could you write me more exactly what I should do now to start the feeding software su.

    Thanks in advance

    Leave a comment:


  • wiedehopf
    replied
    wildthing01, please post the output of:

    cat /etc/fr24feed.ini

    Also elaborate which image you are using.

    Leave a comment:


  • Oblivian
    replied
    Originally posted by wildthing01 View Post
    Thank you all,

    I get the following as an answer.

    Should I play a new software version now?





    2019-10-10 09:34:00 | [feed][n]EDDB165@185.218.24.22:8099/UDP
    2019-10-10 09:34:00 | [feed][n]connecting
    2019-10-10 09:34:00 | [feed][n]connected via UDP (fd 25)
    2019-10-10 09:34:00 | [feed][i]Feed connected
    2019-10-10 09:34:00 | [feed][n]working
    2019-10-10 09:34:30 | [feed][n]ping 1
    2019-10-10 09:34:31 | [feed][n]syncing stream result: 1
    2019-10-10 09:35:00 | [feed][n]ping 2
    2019-10-10 09:35:30 | [feed][i]Feed disconnected
    2019-10-10 09:35:30 | [feed][n]disconnected
    2019-10-10 09:35:30 | info | [feed][n]waiting 8 seconds
    2019-10-10 09:34:00 | [feed][n]EDDB165@185.218.24.22:8099/UDP
    2019-10-10 09:34:00 | [feed][n]connecting
    2019-10-10 09:34:00 | [feed][n]connected via UDP (fd 25)
    2019-10-10 09:34:00 | [feed][i]Feed connected
    2019-10-10 09:34:00 | [feed][n]working
    2019-10-10 09:34:30 | [feed][n]ping 1
    2019-10-10 09:34:31 | [feed][n]syncing stream result: 1
    2019-10-10 09:35:00 | [feed][n]ping 2
    2019-10-10 09:35:30 | [feed][i]Feed disconnected
    2019-10-10 09:35:30 | [feed][n]disconnected
    2019-10-10 09:35:30 | info | [feed][n]waiting 8 seconds
    2019-10-10 09:35:38 | [feed][n]EDDB165@185.218.24.23:8099/UDP
    2019-10-10 09:35:38 | info | Network thread connecting to 185.218.24.23:8099 for feed EDDB165
    2019-10-10 09:35:38 | [feed][n]connecting
    2019-10-10 09:35:38 | [feed][n]connected via UDP (fd 25)
    2019-10-10 09:35:38 | [feed][i]Feed connected
    2019-10-10 09:35:38 | [feed][n]working
    apt-cache policy fr24feed

    if output is not 24-4, then yes.

    Leave a comment:


  • wildthing01
    replied
    Thank you all,

    I get the following as an answer.

    Should I play a new software version now?





    2019-10-10 09:34:00 | [feed][n]EDDB165@185.218.24.22:8099/UDP
    2019-10-10 09:34:00 | [feed][n]connecting
    2019-10-10 09:34:00 | [feed][n]connected via UDP (fd 25)
    2019-10-10 09:34:00 | [feed][i]Feed connected
    2019-10-10 09:34:00 | [feed][n]working
    2019-10-10 09:34:30 | [feed][n]ping 1
    2019-10-10 09:34:31 | [feed][n]syncing stream result: 1
    2019-10-10 09:35:00 | [feed][n]ping 2
    2019-10-10 09:35:30 | [feed][i]Feed disconnected
    2019-10-10 09:35:30 | [feed][n]disconnected
    2019-10-10 09:35:30 | info | [feed][n]waiting 8 seconds
    2019-10-10 09:34:00 | [feed][n]EDDB165@185.218.24.22:8099/UDP
    2019-10-10 09:34:00 | [feed][n]connecting
    2019-10-10 09:34:00 | [feed][n]connected via UDP (fd 25)
    2019-10-10 09:34:00 | [feed][i]Feed connected
    2019-10-10 09:34:00 | [feed][n]working
    2019-10-10 09:34:30 | [feed][n]ping 1
    2019-10-10 09:34:31 | [feed][n]syncing stream result: 1
    2019-10-10 09:35:00 | [feed][n]ping 2
    2019-10-10 09:35:30 | [feed][i]Feed disconnected
    2019-10-10 09:35:30 | [feed][n]disconnected
    2019-10-10 09:35:30 | info | [feed][n]waiting 8 seconds
    2019-10-10 09:35:38 | [feed][n]EDDB165@185.218.24.23:8099/UDP
    2019-10-10 09:35:38 | info | Network thread connecting to 185.218.24.23:8099 for feed EDDB165
    2019-10-10 09:35:38 | [feed][n]connecting
    2019-10-10 09:35:38 | [feed][n]connected via UDP (fd 25)
    2019-10-10 09:35:38 | [feed][i]Feed connected
    2019-10-10 09:35:38 | [feed][n]working

    Leave a comment:


  • ra_br
    replied
    Hallo Berliner,
    ich hatte das selbe Problem!

    Hi to all,
    I had the same Problem, that with update 1.0.24-2 this week feeding the data has not worked anymore.
    But: they did a quick fix yesterdy in the evening to version 1.0.24-4 and now feeding is working correct again.

    So please have a look for the new version 1.0.24-4

    Regards
    ra_br

    Leave a comment:


  • abcd567
    replied
    Give following 2 commands

    sudo systemctl stop fr24feed

    fr24feed

    What do you see?
    After 30 seconds, stop output by pressing Ctrl+c keys.

    sudo killall fr24feed
    sudo systemctl restart fr24feed

    Leave a comment:


  • wildthing01
    replied
    Hello everybody,

    Can anyone help me since last night my feeding software is not working anymore.

    I get the following error message.

    [ ok ] FR24 Feeder/Decoder Process: running.
    [ ok ] FR24 Stats Timestamp: 2019-10-10 06:08:56.
    [ ok ] FR24 Link: connected [UDP].
    [ ok ] FR24 Radar: T-EDDB165.
    [ ok ] FR24 Tracked AC:.
    [ ok ] Receiver: connected (0 MSGS/0 SYNC).
    [FAIL] FR24 MLAT: not running ... failed!

    Leave a comment:

Working...
X