Announcement

Collapse
No announcement yet.

RTL1090 works, but not any other program after adding LNA

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • RTL1090 works, but not any other program after adding LNA

    The two first pictures are rtl1090 running and the coverage i get with VRS+RTL1090

    With dump1090, mrdump1090, modesdeco2 i get nothing.

    I might get a few packets if a plane is right over me, but other then that i get zilch...

    Remove LNA, and i get back to my previous covarge that was MAX 190nm (~350km), and dump1090 etc work just fine.

    With the LNA in and with rtl1090 feeding VRS i get 215nm (~400km) all the time...



    Any ideas why rtl1090 would work like a charm and why the others just wont play at all?!?

    Right now my feeder is down due to this and i cant figure it out.
    Attached Files

  • #2
    My guess would be gain settings.

    Comment


    • #3
      Tested auto and manual gain and no difference...

      Comment


      • #4
        Gain settings are only variable. I would suggest trying ADSB#, it gives better feedback on frame rates vs. gain, determine with that what gain you want then enter that number into dump1090 or modesdeco2.

        Comment


        • #5
          Thanks, looks like i might get it sorted

          Comment


          • #6
            Looks like your LNA overloaded your receiver.

            Happened to me, when LNA is on, I see less planes.
            F-WSSS1 - Cats refused to Pee & Pooh on RadarBox - Running a FR24 Receiver & DVB-T Dongle 24/7 to piss off The Chief Thief.

            Comment

            Working...
            X