Announcement

Collapse
No announcement yet.

FR24 on RPi with piaware and dump1090 already running

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • jb_bak
    replied
    Thank you so much daviddoentniets !! I downloaded the one for the raspberry pi (i'm using an odroid C1) and yep, up and running. It did take me about 5 minutes though

    Leave a comment:


  • SpaxmoidJAm
    replied
    as oblivian said the application you using by default does the what dump1090 does for the flightaware software, you need to tell it not to and connect to a network socket (your existing dump1090) instead.

    Leave a comment:


  • daviddoetniets
    replied
    If dump1090 is already running, just use the program from this thread and you'll have it running within seconds!

    http://forum.flightradar24.com/threa...-Flightradar24

    Leave a comment:


  • Oblivian
    replied
    Edit the config file (or use the web on <rpi IP>:8754 to configure it.

    You should have specified AVR Via TCP and specified the output port of the other app talking to the sticks

    Leave a comment:


  • FR24 on RPi with piaware and dump1090 already running

    Hey guys, I would like to feed flightradar24 with my already setup flightaware feeds. I tried the installation but when I run the feed I get this:


    root@flightaware:/home/odroid/fr24feed_rpi# ./fr24feed
    2015-04-09 09:08:03 | [main][i]FR24 Feeder/Decoder [0x02117000]
    2015-04-09 09:08:03 | [main][i]Version: 1.0.12-3/generic
    2015-04-09 09:08:03 | [main][i]Built on 20150209-1316 (r:master-0a6ad34.git/Linux/armv6l)
    2015-04-09 09:08:03 | [main][i]Copyright 2008-2015 (c) Piotr Pawluczuk
    2015-04-09 09:08:03 | [main][i]Flightradar24 AB(http://flightradar24.com)
    2015-04-09 09:08:03 | [main][i]DNS mode: LIBC
    2015-04-09 09:08:03 | ERROR
    2015-04-09 09:08:03 | [main][i]Reader 0 started
    2015-04-09 09:08:03 | [time][i]Synchronizing time via NTP
    2015-04-09 09:08:03 | [httpd][i]Server started, listening on 0.0.0.0:8754
    2015-04-09 09:08:03 | [master][i]Starting processing thread
    2015-04-09 09:08:03 | [reader][i][0]Initializing reader
    2015-04-09 09:08:03 | [reader][i][0]Connecting to Generic receiver via (exe:///usr/lib/fr24/mr-dump1090 --net --net-http-port 8080 --raw)
    2015-04-09 09:08:03 | [reader][i][0]Connected to the receiver, authenticating
    2015-04-09 09:08:03 | [reader][i][0]Authenticated, processing messages
    Found 3 device(s):
    0: Realtek, RTL2838UHIDIR, SN: 00000001 (currently selected)
    1: Generic, RTL2832U, SN: 77771111153705700
    2: Generic, RTL2832U, SN: 77771111153705700
    usb_claim_interface error -6
    Error opening the RTLSDR device: Device or resource busy
    2015-04-09 09:08:03 | [reader][i][0]Connection terminated
    2015-04-09 09:08:03 | [main][i]Terminating child process 5821 with SIGETERM
    2015-04-09 09:08:09 | [reader][i][0]Connecting to Generic receiver via (exe:///usr/lib/fr24/mr-dump1090 --net --net-http-port 8080 --raw)
    2015-04-09 09:08:09 | [reader][i][0]Connected to the receiver, authenticating
    2015-04-09 09:08:09 | [reader][i][0]Authenticated, processing messages
    Found 3 device(s):
    0: Realtek, RTL2838UHIDIR, SN: 00000001 (currently selected)
    1: Generic, RTL2832U, SN: 77771111153705700
    2: Generic, RTL2832U, SN: 77771111153705700
    usb_claim_interface error -6

    How do I get fr24 to just recieve from the port, not open up the already used RTL dongles?
Working...
X