Announcement

Collapse
No announcement yet.

Sharing Key

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • donde1
    replied
    Found Key
    It's in /etc of RPi

    Don

    Leave a comment:


  • donde1
    replied
    Gregg,

    No problem. All is working fine and I suspect the changes might be not enough to worry about. Maybe I should have added to topic:
    Raspberry Pi and Lost Key. I can't believe I didn't save it somewhere, and where is it in the file system. More frustrating than anything else.

    Don

    Leave a comment:


  • fungus
    replied
    Originally posted by donde1 View Post
    OK I'll start the update process and see what happens. I looked all over the file system, could not find it. I have a ticket into flightradar24 support. They'll probably say the same thing.
    Thanks,
    Don
    Don,

    If you have contacted support they will be able to help but it may take a short time as they have a priority system for responding to issues requiring support's help. They have to as FR24 is world-wide and they need their beauty sleep at times, as do I.

    Regards,
    Gregg

    Leave a comment:


  • donde1
    replied
    OK I'll start the update process and see what happens. I looked all over the file system, could not find it. I have a ticket into flightradar24 support. They'll probably say the same thing.
    Thanks,
    Don

    Leave a comment:


  • fungus
    replied
    donde1,

    If you don't provide a sharing key, an option should come up something like 'forgotten your sharing key?' to which if you respond 'yes' then it will automatically start the process, if you've been uploading in the past. I recently experienced this when I updated the feeder software.

    Regards,
    Gregg
    Last edited by fungus; 2015-02-21, 01:01.

    Leave a comment:


  • donde1
    replied
    By just plugging 5 volts into the Raspberry Pi. A USB cable feeds the RTL-SDR dongle. A CAT 5 cable plugd into my router. I have the ability to SSH into the PI, but that's after the full boot. You gave me an idea. I'll look at the boot using my HDMI monitor. I might see the Key there. Let you know.

    Leave a comment:


  • Amper
    replied
    how do you start fr24 feeding sw?

    Leave a comment:


  • donde1
    replied
    Where would see this statement? I'm using a Raspberry Pi, not Windows.

    I see this when I run status.

    pi@raspberrypi ~ $ service fr24feed status
    [ ok ] FR24 Feeder/Decoder Process: running.
    [ ok ] FR24 Stats Timestamp: 2015-02-20 17:02:55.
    [ ok ] FR24 Link: connected [UDP].
    [ ok ] FR24 Radar: T-KVNY4.
    [ ok ] FR24 Tracked AC: 15.
    [ ok ] Receiver: connected (704747 MSGS/0 SYNC).

    And this when I run log

    pi@raspberrypi /var/log $ tail -f fr24feed.log
    2015-02-20 09:05:33 | [feed][n]syncing stream
    2015-02-20 09:05:38 | [feed][i]sent 12 AC in 1 packet
    2015-02-20 09:05:43 | [feed][i]sent 12 AC in 1 packet
    2015-02-20 09:05:48 | [feed][i]sent 13 AC in 1 packet
    2015-02-20 09:05:51 | [feed][i]removed 1 of 18 AC
    2015-02-20 09:05:53 | [feed][i]sent 16 AC in 1 packet
    2015-02-20 09:05:55 | [feed][i]removed 1 of 18 AC
    2015-02-20 09:05:58 | [feed][i]sent 14 AC in 1 packet
    2015-02-20 09:06:03 | [feed][i]sent 14 AC in 1 packet
    2015-02-20 09:06:08 | [feed][i]sent 14 AC in 1 packet
    2015-02-20 09:06:13 | [feed][i]sent 15 AC in 1 packet
    2015-02-20 09:06:19 | [feed][i]sent 14 AC in 1 packet
    2015-02-20 09:06:24 | [feed][i]sent 14 AC in 1 packet

    I looked in dmesg, but couldn't find it there.

    Don

    Leave a comment:


  • Amper
    replied
    You have sharing key in command for starting feeder don't you?
    FR24AUTHIP=83.140.247.20 ./fr24feed_arm-le_241s --fr24key=YOUR_SHARING_KEY
    or similar

    Leave a comment:


  • donde1
    started a topic Sharing Key

    Sharing Key

    I have been feeding data for a few weeks now. I'm using Raspberry Pi as the hardware. plus the FR24 feeder software.
    I now see an update for the software is available to download. FR24 requires the Sharing Key in order to update. Somehow I have misplaced it. I think it's located in the Linux program on the the Pi, but can't seem to find it.
    Can someone help?
    Don
Working...
X