So I have an access point with a USB port that I've installed OpenWRT on it. I've installed the rtl-sdr toolkit and can see data using rtl_adsb.
How can I turn around and submit this as a feed? It seems to be that most info is for Pis etc...
My device:
Oh, I should say - I have some x86_64 equipment around - maybe I can pull the data using rtl_adsb and then submit it from another system?
How can I turn around and submit this as a feed? It seems to be that most info is for Pis etc...
My device:
# cat /proc/cpuinfo
system type : Atheros AR9344 rev 2
machine : WD My Net N600
processor : 0
cpu model : MIPS 74Kc V4.12
BogoMIPS : 278.93
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes, count: 4, address/irw mask: [0x0000, 0x0ff8, 0x0ff8, 0x0ff8]
isa : mips1 mips2 mips32r1 mips32r2
ASEs implemented : mips16 dsp dsp2
shadow register sets : 1
kscratch registers : 0
core : 0
VCED exceptions : not available
VCEI exceptions : not available
system type : Atheros AR9344 rev 2
machine : WD My Net N600
processor : 0
cpu model : MIPS 74Kc V4.12
BogoMIPS : 278.93
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes, count: 4, address/irw mask: [0x0000, 0x0ff8, 0x0ff8, 0x0ff8]
isa : mips1 mips2 mips32r1 mips32r2
ASEs implemented : mips16 dsp dsp2
shadow register sets : 1
kscratch registers : 0
core : 0
VCED exceptions : not available
VCEI exceptions : not available
Comment