Tweet
Originally posted by peterhr
View Post
-
Is Time & Tide catching up on you paterhr? It does happen to us mortals once in awhile. Hahahahahaha,,,,,LOL -
Hello to you,Originally posted by iamnothere View PostHost new feeder T-ZSSS32 , Shanghai Hong-Qiao
RTL 2832 Dongle, DIY quarter wave antenna .
filter on [ATTACH=CONFIG]4642[/ATTACH]
Perhaps you can apply for a FR24 kit if you haven't done so as your range from where you are is very good for ZSSS.Comment
-
if you have a radarcape it too is enabled with MLAT whilst feeding to FR24, so you would be helping in that respectT-EGLF8Comment
-
DHL delivered (didn't even know they still had couriers) the FR24 package to me today and I now have it up and running. About less than half a mile from KBTV... (shouldn't my tag change from having a T to an F now that I am using official equipment?)Comment
-
Eventually. It has to phone home for a while, and be manually activated from Sweden when they come into daytimeOriginally posted by drew13btv View Post
Posts not to be taken as official support representation - Just a helpful uploader who tinkersComment
-
Drew,. Maybe if you EMail "Support" and let them know that the FR24 Reciever is up and running.
Then can activate it..(Then you see the F- after it has been activated)(F-EDLE1)delcomp-DEL-David Tks(My friend Mike, all three of them)
URL: http://banner.flightdiary.net/EDLM
1090SJ(Ae) /(6m. Ecoflex10) / SBS 3 /-FR24 Box/ Power-line Connection (Ethernet)Comment
-
3 new receivers just activated. Hosts should get an activation email within 5 minutes.Comment
-
Thank you sir. Glad to be selected and happy to be a member here.
Oh yeah, forgot to ask. Is there a command line option list for fr24feed? I know the --bs and --bs-port but other than that are there any other important command line options I should know about?Comment
-
You don't need to run this...Originally posted by drew13btv View Post
It is all onboard on the receiver. As soon as it has internet, its uploading. You don't need to capture the data using the feed softwarePosts not to be taken as official support representation - Just a helpful uploader who tinkersComment
-
Another receiver sent to Banda Aceh, fingers crossed the coverage is at least decent. F-WITT1 is giving very limited coverage only.Originally posted by Mike View PostComment
-
hello everyone I'm the feeder F-LIMJ1 I looked at the menu inside of the receiver FR24 box indicates a temperature of 59 ° C I placed the equipment in a covered space under the roof. is a normal operating temperature so high?
thanks
See you soon
AndreaComment
-
Hi Andrea,Originally posted by tribe1980 View Post
According to this thread http://forum.flightradar24.com/threa...ed-temperature, there has been no known issues regarding operating temperature to FR24's receiver. If there is support will send you an email. Having it placed under a covered space under the roof seems fine. Enjoy the kit!Comment
-
The temp is not the operating temp, it is the CPU core temp I believe, 59 deg is not excessive for a CPU.Originally posted by tribe1980 View Post
Just enjoy your box and don't worry too much about it.
Ben.FR24 F-EGLF1, Blitzortung station 878, OGN Aldersht2, PilotAware PWAldersht, PlanePlotter M7.Comment
-
thank's a lot
AndreaComment
-
Brunei! Nice one. Don't see it at the moment perhaps the host is still working on getting the kit installed. Hope the range will be good and a ground bonus! Let's hope that someone will apply and host the kit from Miri or Bintulu, Sarawak too!Originally posted by Mike View PostComment
Comment