Originally posted by SoCalBrian
View Post
Announcement
Collapse
No announcement yet.
Flightradar24 Feeder Chat
Collapse
X
-
-
Great job FR24 staff getting all those online in 2015.
Let's start counting those new installed receivers in 2016
Originally posted by Mike View Post
Leave a comment:
-
Originally posted by patrick1501 View PostI believe that the max range is not the maximum you have obtained during the last 30 days, but more an average of the daily max range over the last 30 days.
For example, in the last 7 days, I had daily max ranges around 350 NM, but on the stats page my max range is only 310 NM.
Leave a comment:
-
Originally posted by Jarod View PostI have a question about the stats.
...
What are these stats and should they not reflect on the fr24 stats page?
For example, in the last 7 days, I had daily max ranges around 350 NM, but on the stats page my max range is only 310 NM.
Leave a comment:
-
I have a question about the stats. http://www.flightradar24.com/share-statistics
A few days ago i replaced my fr24 antenna cable since the storms lately had great fun on my roof.
I am getting my old range again, 250nmi+ easy: http://x264.nl/dump/ads-b-antenna-ca...-28-258nmi.jpg
Now i have two questions:
1) Max range, Maximum range of radar in the last 30 days, nmi.
Before and after my new cable, this value has been 270 nmi.
How/when does this update?
This could be ok i guess, but see question 2
2) In my account: https://www.flightradar24.com/premium/
Maximum distance:
2016-01-01: 394nm
2015-12-31: 356nm (bad weather it seems)
2015-12-30: 346nm (bad weather it seems)
2015-12-29: 388nm <-- cable fixed
2015-12-28: 364nm
2015-12-27: 366nm
2015-12-26: 360nm
What are these stats and should they not reflect on the fr24 stats page?
Update:
The Polar Plot shows: Range 398nm on one of dots.
So we now have 3 maximum range values, which are correct?Last edited by Jarod; 2016-01-01, 16:39.
Leave a comment:
-
Congratulations on getting the first ADS-B receiver in Antarctica online on FR24.
Leave a comment:
-
Originally posted by Enterprise View PostSoftware configuration in flightradar box console. The shown message is "Sorry, but config has been disabled for this device!"
Ben.
Leave a comment:
-
Originally posted by skyspotter View PostWhat software are you talking about?
Leave a comment:
-
Originally posted by Enterprise View PostHi Guys!
When I click software settings on my box console, a message appears and tell me that software settings are disabled.
And the problem is that I am so curious about what is behind that message.
Can anybody help me? what is in software settings section and how I can see it?
What software are you talking about?
Leave a comment:
-
Hi Guys!
When I click software settings on my box console, a message appears and tell me that software settings are disabled.
And the problem is that I am so curious about what is behind that message.
Can anybody help me? what is in software settings section and how I can see it?
Leave a comment:
-
Nice to see more of those FR24 boxes installed in Alaska in month of November.
Leave a comment:
-
If you followed the guide. And entered it as part of the FR24 feed config. Then yes, you need to advise them
Leave a comment:
-
Feeder location settings need to change
Newbie here. My rpi2 was up yesterday. When i opened my gmap it seems a bit offset to my exact location. It was the location data i provided when i signed up to feed to fr24 and to my dump1090-mutability. Am afraid i might feed wrong data due to this location issue. Do i need to change it from my dump1090 end or from fr24feed config side..
Leave a comment:
-
Thanks for the input guys.. Yes my dump is set to auto start also.. Upon checking the status this morning..everything seems running and connected after the restart schedule was pushed midnight..
Leave a comment:
-
Originally posted by henkverhaar View PostMy experience is that if you installed fr24feed as per the instructions, it will ensure that it is installed as autostart...
Leave a comment:
Leave a comment: