Raspberry Pi type B + DVB-T Dongle to feed FR24

[equi]

No worries, I recommend the Banana Pi

[F-EGLF1]

For the simple reason that they are cheap and well supported, buy something obscure or esoteric if you wish, but you may find you are on your own when it comes to things like driver support.
The RPi has strong community support and help is easier to find if you have any problems.
Ben.

[istvan.jakob]

Hi, OK guys, I have tryed for 2 Days now and a canf get it to install fr24feed 1.0.9-3armhf.deb on my RPi? first i installed NOOBS log in pi, password, wget http://feed.flightradar24.com/raspbe....9-3_armhf.deb but nothing happens!! can someone send me a step by step instrucktion??

Manny Thanks
/Istvan

[equi]

The manual incl. a step-by-step instruction is here http://feed.flightradar24.com/fr24feed-manual.pdf

[istvan.jakob]

Thanks i have tryed to follow this for tow Days!! but i will start from scratch and follow this guide.
/Istvan

[equi]

Istvan,

then please post a Screenshot or error log when a step failes

[istvan.jakob]

Hi, thanks. I´m gettins this far, see attached photo, I have tryed several time but cant install /fr24feed_1.0.9-3_armhf.deb and run it??
RPi.jpg

[equi]

That shot looks good. You already finished the download successful. Now you have to install it with

sudo dpkg -i fr24feed_1.0.9-3_armhf.deb

[istvan.jakob]

hi, I´m finally procceding :-) but i stopped in step 4.3a "Please enter your recivers IP address/hostname" Wher do i find this in RPi??

[equi]

Leave that blank if your USB Stick is directly connected to the Pi

[istvan.jakob]

I cant, it says value 1 is incorrect, please enter a correct hostnam that resolves to a valid IP!

[equi]

Remove the 1 then, it must be completely blank.Otherwise try localhost. What f
did you choose on answer1?

[istvan.jakob]

I managed to come this far, and got stucked again, here is a screendump...RPi_2.jpg

[equi]

Thats ok (more or less*hehe)

Open the FR24 Webinterface (YourPiIP:8754) and check the Settings there. Please refer to this shot

Good morning seh2000,

here is the promised Screenshot[ATTACH=CONFIG]5318[/ATTACH]

[trigger]

Hi Istvan, I get the same error message. Try stopping and restarting the feed again then wait a couple of minutes before doing the status.

sudo service fr24feed stop
sudo service fr24feed start

If that doesn't work, I found I had to take some of the entries in fr24feed.ini out. Use nano fr24feed.ini to edit out the entries. I can get it to work with just the entries for receiver and key. I'm using the latest beta software and thought it was an issue with that but you are getting the same with production software. Strange.