Underground power here as well, only issue has been lightning hitting a feeder and a substation causing a low voltage brown out. Otherwise its normally reliable but when it breaks well....
Announcement
Collapse
No announcement yet.
Aussie Feeders
Collapse
X
-
Originally posted by YSWG View PostUnderground power here as well, only issue has been lightning hitting a feeder and a substation causing a low voltage brown out. Otherwise its normally reliable but when it breaks well....
I also once had the pleasure of visiting Wagga Wagga (I've had a swim at the Wagga beach) and enjoyed the place immensely, although it was many years ago now.
I hope the thing with the cockies and your power improve in time. Good luck, and hope you can continue uploading/contributing.
Some of our best rugby league players and cricketers have come from your neck of the woods. Must be real good water around there.
Regards,
GreggLast edited by fungus; 2015-01-20, 05:50.YSSY2/T-YSSY4 [SBS-1 Basestation w/- SSE-1090 SJ Mk2 Antenna (Thanks Delcomp) ] [Uniden UBCD996T w/- 16 element Wideband Discone VHF/UHF Antenna, and tuned 108MHz-137MHz Airband Antenna] [Trialing a home-brew 1090MHz collinear antenna]
Comment
-
Rigged it temporarily ATM, so range will be less.
Mobile phone pics, apologies for the quality.
IMG_20150120_143429.jpgIMG_20150120_165243.jpg
Water here is mostly bore, with ~20% from the river.
The mast is a little lower (~5cm) but is now up, until I can work on a permanent solution to stop the cockatoos.Last edited by YSWG; 2015-01-20, 08:31.F-YSWG1 and T-YSWG2
Comment
-
Hi Folks,
Just finished home brewing T-YBBN50 .. And judging by that number on the end I am guessing there are a few of us in the Brisbane AP catchment .. I'm running dump1090 on a Pi.. Currently I have put together a collinear antenna with RG6 and today I mounted it up on my 6ft mast, on a single story house, so it's not up real high, but so far have tracked planes as far north as the northern shoreline of Lake Monduran just NW of Gin Gin, I can get just a little past Casino down south. and maybe 150km out to see in some directions, I have sighted planes just west of Dalby, and to the north west of my position out above some place called Wigton.. The antenna is not tuned and it is not soldered it's pushed together akin to the youtube video which comes up when googling for 1090mhz diy antenna... So I know it's not flash, not proper, but it seems to be working to a certain extent... It should be noted I am a radio novice, I just like tinkering with the Pi's and re-acquainting myself with electronics after 25yrs or so...
Regards,
CameronT-YBBN50 - Kallangur, QLD, Australia
Comment
-
And I'm offline again! Very lightning active storm moving though. Slow moving and looks to be forming a storm train.
IMG_20150121_004147.jpg
Welcome bhaal! I did the very same thing with my DIY CoCo antenna for the dongle, still does a great job for a cheap DIY job.Last edited by YSWG; 2015-01-20, 14:03.F-YSWG1 and T-YSWG2
Comment
-
That's some nasty looking weather.. I don't yet have a lightning arrester for my antenna, but realistically it's not going to matter, there are 3 weather cams up on the same mast, the whole point of those is to capture the storms etc.. I should get cat5 arresters, though I am not sure they will allow POE to traverse the arrester, and I might have to sell one of the kids in order to afford them, will need to look into that (the arresters! not the selling the kids thing).. I don't care to much about frying the Pi's (the cameras are Pis as well) or antenna .. but I would prefer to limit the destruction of the rest of my network... Hmmmm...T-YBBN50 - Kallangur, QLD, Australia
Comment
-
Interestingly the airport (~10km as the crow flys) only had 11mm but the city has had way more. Lightning was very random, a few close strikes and when you think it's gone you have a bolt from the blue. Thankfully no damage.
In the past I've had lightning fry my 51cm TV as it was still connected to the antenna. With arresters, the towers on the hill (TV repeater, emergency services, council ect) have very expensive arresters, but one had a fault (didn't stop the indirect strike) and took out the TV repeater. Really just down to luck.F-YSWG1 and T-YSWG2
Comment
-
Originally posted by bhaal View Post.. but I would prefer to limit the destruction of the rest of my network... Hmmmm...
Comment
-
Originally posted by YSWG View Postvery expensive arresters, but one had a fault (didn't stop the indirect strike) and took out the TV repeater. Really just down to luck.
Comment
-
Originally posted by bhaal View PostHi Folks,
Just finished home brewing T-YBBN50 .. And judging by that number on the end I am guessing there are a few of us in the Brisbane AP catchment .. I'm running dump1090 on a Pi.. Currently I have put together a collinear antenna with RG6 and today I mounted it up on my 6ft mast, on a single story house, so it's not up real high, but so far have tracked planes as far north as the northern shoreline of Lake Monduran just NW of Gin Gin, I can get just a little past Casino down south. and maybe 150km out to see in some directions, I have sighted planes just west of Dalby, and to the north west of my position out above some place called Wigton.. The antenna is not tuned and it is not soldered it's pushed together akin to the youtube video which comes up when googling for 1090mhz diy antenna... So I know it's not flash, not proper, but it seems to be working to a certain extent... It should be noted I am a radio novice, I just like tinkering with the Pi's and re-acquainting myself with electronics after 25yrs or so...
Regards,
Cameron
Comment
-
Ok, this is bugging me a little... What is the between T and F ??? I am assuming the T is for DIYers and the F is for the FR24 supplied receiver and antenna? I haven't read through all the posts in this thread yet, nor a lot of the others, so forgive me if I am asking something which should be (and probably is) in a FAQ somewhere (that I have missed).. As for my feeder popping up, I was very surprised to see it being used straight away.. I'd love to know the antenna configurations of some of the other T feeders here..
Regards,
CameronT-YBBN50 - Kallangur, QLD, Australia
Comment
-
Originally posted by airnrail View PostNever too many anywhere and the T feeders always do a great job around Brisbane. Right now, for instance, I can't see anything but T feeders including your new one. I think the T feeders don't get the recognition they deserve because even though they often get beaten to the punch by the F feeders, when there is a power failure or whatever you can count on a T feeder or two popping up that you've not seen before. Some of you guys must run them on batteries or have pedal wireless! Cheers.T-YBBN50 - Kallangur, QLD, Australia
Comment
Comment