Announcement

Collapse
No announcement yet.

Aussie Feeders

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • PiRad108
    replied
    Hello eveyone,

    Just received my ADS-B dongle a couple of days ago, I am running it at Northgate about 8 kms from the Brisbane airport. I am just using the supplied internal antenna. I have started researching antennas and am looking at my first built antenna being a colineal coax using RG6 with a 16 element array. As you may have guessed from the name I ran raspberry pi's, I am reasonably competent with Linux operating systems having made the transition about 12 years ago and never looked back. I will probably post a few pics of planes at Brisbane airport also. As the ATC's say gedday.
    Last edited by PiRad108; 2018-02-23, 21:51. Reason: more info

    Leave a comment:


  • Stealth
    replied
    Originally posted by airnrail View Post
    I'm surprised that there are any Fokkers other than perhaps the odd F27 flying around Oz without ADS-B. Most of them, even those running for Qantas and Virgin are or have been owned by Alliance and they have always seemed to fit them with ADS-B before putting them into service, even long before it became mandatory. As far as I know the only RPT jet flying around Australia without it is a JetGo E135 VH-JZG. I'm not sure what it's story is but it always shows up as MLAT - one of very few Australian MLAT commercial aircraft on FR24 these days.
    I wasn't suggesting that there were any without ADS-B, just that for some strange reason I (and at least one other) was having problems getting any signals. Another example is shown in the attached capture. The 'ghost' was bracketed by other aircraft, so coverage wasn't the issue.
    1652 cross.JPG1652 cross.JPG

    Leave a comment:


  • airnrail
    replied
    Originally posted by Stealth View Post
    I haven't seen any 27 or 50s for a while, I was mainly thinking of the loads of 100 series with Qantas (and associates), Virgin etc. Can't see them getting a Mode S exemption. Its not just me, as I saw another Planeplotter uploader that also struggled to track the same one. A day or so ago there were three outbound on the same SID, I got good tracking from 1 and 3, but the middle one was effectively invisible to me, although showing on FR24. Only seems to happen with F100s.
    I'm surprised that there are any Fokkers other than perhaps the odd F27 flying around Oz without ADS-B. Most of them, even those running for Qantas and Virgin are or have been owned by Alliance and they have always seemed to fit them with ADS-B before putting them into service, even long before it became mandatory. As far as I know the only RPT jet flying around Australia without it is a JetGo E135 VH-JZG. I'm not sure what it's story is but it always shows up as MLAT - one of very few Australian MLAT commercial aircraft on FR24 these days.

    Leave a comment:


  • Stealth
    replied
    I haven't seen any 27 or 50s for a while, I was mainly thinking of the loads of 100 series with Qantas (and associates), Virgin etc. Can't see them getting a Mode S exemption. Its not just me, as I saw another Planeplotter uploader that also struggled to track the same one. A day or so ago there were three outbound on the same SID, I got good tracking from 1 and 3, but the middle one was effectively invisible to me, although showing on FR24. Only seems to happen with F100s.

    Leave a comment:


  • Oblivian
    replied
    zip. We did have F27s doing freight runs but they are all headed to you

    http://mrcaviation.blogspot.co.nz/20...pdated-12.html

    We get some of yours at times too, FK50 (-FKO) does tour group runs and when that is out the upgraded 70/100s from Alliance

    The latter do show up at times. Possibly only MLAT

    Leave a comment:


  • Stealth
    replied
    Here's a question for the 'over-Easters', do you have as many old Fokkers operating in various fleets as we have in WA?

    Supplementary question to all, do you find that an occasional one is very limited in ADS-B signal?

    Cheers,
    Ian on the Darling Scarp

    Leave a comment:


  • rodeo
    replied
    Yes, I've been rather quiet here, FA and on the Faceache group as well.

    T-YSBK22 has been chugging along without any issues (apart from the leak in my antenna a while ago) so I haven't really been looking at these forums much. In amongst working, running around after the kids with their activities (soccer etc) and a few other things, I haven't had much time to play with anything. Its sort of coming to a head though, as I need to replace my desktop PC as it's an old XP machine plus replace my file server.... lot alone doing things I *should* be doing like paint the house :-/

    Cheers,

    Andrew

    Leave a comment:


  • bhaal
    replied
    Hahah Yep, it's all your fault Oblivian! You ready to be blown away by Gita? Assuming she is still heading towards NZ?

    Leave a comment:


  • Oblivian
    replied
    My grumpy "for the love of it look for answers before posting" persona when the feeder pooped itself probably scared them all off like everyone else

    Sent from my XT1092 using Tapatalk

    Leave a comment:


  • bhaal
    replied
    Wow, this thread slowed down a little!

    Hi NetRanger, welcome to the thread and feeding, hope all is going well.

    T/F-YBBN1 is run by Kemistry, he occasionally pops his head in here, though I've noticed lately that his PiAware feeder seems to have some stability issues?

    After a long absence due to a house move (to a much better locations in the same suburb), I've been able to get my feed going again, it's T-YBBN50.. My next project which will hopefully improve things slightly is to shorten my coax by putting the FA ProStick Plus dongle on a USB extension and upgrade from the old Pi B+ to a Pi3 .. I keep buying Pi3's then either selling as part of other jobs or finding other uses for them before I remember why I bought them

    Anyway Happy New Year etc! I hope all us Aussie feeders + Oblivion are doing well etc. Take care!

    Regards,
    Cameron
    Last edited by bhaal; 2018-02-14, 04:13. Reason: A brainfart occured

    Leave a comment:


  • ylis
    replied
    For the north east NSW and south east Queensland feeders, I have just activated T-YEVD1 at Evans Head. Not sure if this will remain in position permanently (or maybe move to a better location) but it was installed primarily for the Great Eastern Fly In ( see http://www.greateasternflyin.com ) this weekend for ground and low level aircraft traffic to see whats about - if anything.

    Coverage favours the northern arc from South-west to East.

    Cheers

    Peter

    Leave a comment:


  • airnrail
    replied
    Originally posted by F-YPTN1 View Post
    HI all,

    Well its been fun, just replaced the PWR supply and hopefully am back on the Radar (so to speak) I'm F-YPTN1 Located in Cossack (Near Katherine NT) .

    Hopefully in a few weks another reciever will be activated in Katherine,

    Regards
    Well done. There are always gaps in the NT coverage.

    Leave a comment:


  • ylis
    replied
    Hi YPTN - Tenant Creek has been offline for quite some time leaving quite a large hole in FR24 coverage. Any contacts in that area who might be interested in hosting a receiver ?

    Regards

    Leave a comment:


  • ylis
    replied
    Hi Lancair70 and Netranger - I'm YLIS. Any interest in meeting sometime for a coffee and a chat ?? Say .... at Bangalow

    Leave a comment:


  • F-YPTN1
    replied
    HI all,

    Well its been fun, just replaced the PWR supply and hopefully am back on the Radar (so to speak) I'm F-YPTN1 Located in Cossack (Near Katherine NT) .

    Hopefully in a few weks another reciever will be activated in Katherine,

    Regards

    Leave a comment:

Working...
X