Linux feeder software for Flightradar24 (Old software)
...
This software has been removed and is not supported as feeding software any more!
We have prepared a beta version of our Linux feeding software.
Builds for different architectures can be downloaded using links below:
x86/i386, dynamically linked (23/04/2014):
Use "fr24feed_x86_242 --fr24key=YOUR_SHARING_KEY" to run the software.
x64, dynamically linked (23/04/2014):
Use "fr24feed_x86_242 --fr24key=YOUR_SHARING_KEY" to run the software.
ARM LE, dynamically linked (23/04/2014):
Use "fr24feed_arm-le_242 --fr24key=YOUR_SHARING_KEY" to run the software.
ARM Raspberry-Pi, dynamically linked (07/05/2014):
Use "fr24feed_arm-rpi_242 --fr24key=YOUR_SHARING_KEY" to run the software.
ARM LE, statically linked (23/04/2014):
Use "FR24AUTHIP=83.140.247.20 ./fr24feed_arm-le_241s --fr24key=YOUR_SHARING_KEY" to run the software. - Use only if it fails to connect with errno=111!
1. You can now overwrite basestation host/ip with --bs-ip=HOSTNAME/IP --bs-port=NNNNN
2. If you want the application to terminate after there's no data for 15 minutes, please add --self-kill=yes to the argument list
3. The FR24AUTHIP environmental variable is no longer necessary for static builds
4. Floating point compatibility issues should be resolved across ARM platforms, please try --test=math to verify.
5. Starting from version 242 you can use self-registration, just use --signup on startup and follow the instructions.
----------------------
FR24feed for Linux works just as the Windows software, it connects to Basestation stream (localhost:30003 by default) and processes the output. That means that you need to decode the data from your receiver before fr24feed can upload the data. If you need to change ip or port, please contact us, as it is changed server side. If you have a receiver and don't know how to decode the data, we can provide you with a special version that includes decoding. Please send an e-mail with information about your receiver and setup. Please note that special software requests may take 1-4 weeks to handle as we are quite heavily loaded with tasks.
If you have any questions, comments or just manage to get it working, please let us know.
This software has been removed and is not supported as feeding software any more!
We have prepared a beta version of our Linux feeding software.
Builds for different architectures can be downloaded using links below:
x86/i386, dynamically linked (23/04/2014):
Use "fr24feed_x86_242 --fr24key=YOUR_SHARING_KEY" to run the software.
x64, dynamically linked (23/04/2014):
Use "fr24feed_x86_242 --fr24key=YOUR_SHARING_KEY" to run the software.
ARM LE, dynamically linked (23/04/2014):
Use "fr24feed_arm-le_242 --fr24key=YOUR_SHARING_KEY" to run the software.
ARM Raspberry-Pi, dynamically linked (07/05/2014):
Use "fr24feed_arm-rpi_242 --fr24key=YOUR_SHARING_KEY" to run the software.
ARM LE, statically linked (23/04/2014):
Use "FR24AUTHIP=83.140.247.20 ./fr24feed_arm-le_241s --fr24key=YOUR_SHARING_KEY" to run the software. - Use only if it fails to connect with errno=111!
1. You can now overwrite basestation host/ip with --bs-ip=HOSTNAME/IP --bs-port=NNNNN
2. If you want the application to terminate after there's no data for 15 minutes, please add --self-kill=yes to the argument list
3. The FR24AUTHIP environmental variable is no longer necessary for static builds
4. Floating point compatibility issues should be resolved across ARM platforms, please try --test=math to verify.
5. Starting from version 242 you can use self-registration, just use --signup on startup and follow the instructions.
----------------------
FR24feed for Linux works just as the Windows software, it connects to Basestation stream (localhost:30003 by default) and processes the output. That means that you need to decode the data from your receiver before fr24feed can upload the data. If you need to change ip or port, please contact us, as it is changed server side. If you have a receiver and don't know how to decode the data, we can provide you with a special version that includes decoding. Please send an e-mail with information about your receiver and setup. Please note that special software requests may take 1-4 weeks to handle as we are quite heavily loaded with tasks.
If you have any questions, comments or just manage to get it working, please let us know.
Comment