Announcement

Collapse
No announcement yet.

[FAIL] FR24 MLAT: not running ... failed!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • [FAIL] FR24 MLAT: not running ... failed!

    I have discovered that my raspberrypi has stopped doing MLAT:
    [ ok ] FR24 Feeder/Decoder Process: running.
    [ ok ] FR24 Stats Timestamp: 2023-11-11 08:58:44.
    [ ok ] FR24 Link: connected [UDP].
    [ ok ] FR24 Radar: T-ENSK3.
    [ ok ] FR24 Tracked AC: 0.
    [ ok ] Receiver: connected ( MSGS/ SYNC).
    [FAIL] FR24 MLAT: not running ... failed!

    I am not aware of any configuration changes apart from those coming from routine software updates (everything should be updated). I have tried rebooting and exchanging the USB stick with a spare one.

    I have looked through some other threads with solutions to similar problems, but have not found anything that helped.

    How should I proceed to make MLAT work again?

  • #2
    Until ac tracked is more than 3 it won't do much at all.
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

    Comment


    • #3
      Originally posted by Oblivian View Post
      Until ac tracked is more than 3 it won't do much at all.
      Saturday morning is quite in my rather remote location, but I'm getting the same error when multiple aircraft are tracked.

      Comment


      • #4
        If you are remote its no great loss..it needs at least 3 full adsb hits + positioless.

        They don't want people using it unless you use dvbt and feed only them either (dumb)

        And if nowhere near any other ground stations for it to use their data too, it won't be much use to fr. Turn off the option and don't panic over it.
        Posts not to be taken as official support representation - Just a helpful uploader who tinkers

        Comment


        • #5
          FR24 MLAT: not running ... failed!

          ​So what?
          For my 4 stations, MLAT is not running. What do I loose? Nothing.



          FR24-CYYZ9.png


          FR24-CYYZ21.png


          FR24-CYYZ52.png


          FR24-CYYZ100.png

          Comment

          Working...
          X