Announcement

Collapse
No announcement yet.

Pi unable to connect to WiFi, even with Ethernet

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Pi unable to connect to WiFi, even with Ethernet

    I downloaded the Pi24 image and used Etcher to write to a 32gb microSD card. I initially tried editing the wpa-supplicant file, but later connected it to ethernet. However, once plugged in, it is simply not seen on either the Xfinity Wi-Fi app or on Advanced IP Scanner. This is the second Pi Model 3 that has had this issue. Any ideas?

  • #2
    Start with the FA one and add fr24.

    Not helpful, but works better
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

    Comment


    • #3
      How would I go about adding the FR24 feed to FlightAware? Is there a command I can run to connect the FR24 feed in conjunction with the PiAware or will I need to reflash the SD card?

      Comment


      • #4
        Sure is.

        Have a poke around here

        https://github.com/wiedehopf/adsb-wi...ADS-B-receiver

        Any other image than the fr24 ones a good start
        Posts not to be taken as official support representation - Just a helpful uploader who tinkers

        Comment

        Working...
        X