Announcement

Collapse
No announcement yet.

dump1090-fa: usb_claim_interface error -6

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dump1090-fa: usb_claim_interface error -6

    All, I am frustrated.
    I did a fresh installation on my Raspberry with FR24 and Piaware.
    Now every minute the dump1090-fa crashes and starts again.
    Reboot did not help. I have created the blacklist entry but no luck, too.

    May 02 17:33:05 raspberrypiwatch dump1090-fa[4620]: Sun May 2 17:33:05 2021 CEST dump1090-fa 5.0 starting up.
    May 02 17:33:05 raspberrypiwatch dump1090-fa[4620]: rtlsdr: using device #0: Generic RTL2832U OEM (Realtek, RTL2838UHIDIR, SN 00000001)
    May 02 17:33:05 raspberrypiwatch dump1090-fa[4620]: usb_claim_interface error -6
    May 02 17:33:05 raspberrypiwatch dump1090-fa[4620]: rtlsdr: error opening the RTLSDR device: Device or resource busy
    May 02 17:33:05 raspberrypiwatch systemd[1]: dump1090-fa.service: Main process exited, code=exited, status=1/FAILURE
    May 02 17:33:05 raspberrypiwatch systemd[1]: dump1090-fa.service: Failed with result 'exit-code'.

    /etc/fr24feed.ini
    receiver="beast-tcp"
    fr24key="xxx"
    host="127.0.0.1:30005"
    bs="yes"
    raw="yes"
    logmode="1"
    windowmode="0"
    logpath="/var/log/fr24feed"
    mpx="no"
    mlat="yes"
    mlat-without-gps="yes"

    PIaware:
    PiAware master process (piaware) is running with pid 4437.
    PiAware ADS-B client (faup1090) is running with pid 4466.
    PiAware ADS-B UAT client (faup978) is not running (disabled by configuration settings)
    PiAware mlat client (fa-mlat-client) is running with pid 4469.
    Local ADS-B receiver (dump1090) is not running.

    readsb (pid 437) is listening for ES connections on port 30005.
    faup1090 is connected to the ADS-B receiver.
    piaware is connected to FlightAware.

    dump1090 is producing data on localhost:30005.

    Your feeder ID is xxx (configured at /etc/piaware.conf:7)
    Last edited by bondskin; 2021-05-02, 16:14.

  • #2
    You have readsb and dump1090-fa ... it's either or so you have to decide.

    Some other good stuff you might like and a guide:
    https://github.com/wiedehopf/adsb-wi...ADS-B-receiver

    Comment


    • #3
      wiedehopf thanks.
      I have deinstalled readsd and rebooted.
      But I guess I screwed it up, sorry!

      2021-05-02 19:22:04
      tar1090
      raspberrypiwatch
      Info
      No aircraft.json found in /run/readsb! Try restarting dump1090 or reinstalling tar1090 if you switched dump1090 to readsb!
      2021-05-02 19:22:04
      tar1090
      raspberrypiwatch
      Info
      No aircraft.json found in /run/readsb! Try restarting dump1090 or reinstalling tar1090 if you switched dump1090 to readsb!
      2021-05-02 19:22:04
      tar1090
      raspberrypiwatch
      Info
      /usr/local/share/tar1090/tar1090.sh: line 104: /run/readsb/aircraft.json: No such file or directory
      2021-05-02 19:22:04
      tar1090
      raspberrypiwatch
      Info
      /usr/local/share/tar1090/tar1090.sh: line 104: /run/readsb/aircraft.json: No such file or directory


      Any hint what I can do please?
      Last edited by bondskin; 2021-05-02, 17:23.

      Comment


      • #4
        Reinstall tar1090 ...

        Comment

        Working...
        X