Need help accessing Pi

[Dutchyb]

Good evening,

I need help form you gurus.

I am usnfg a MacBook ro access my Pi.
Did is what I do:
Finder-> Go-> Connect to server.
ssh://pi@192.168.xxx.xx
It seems there is a connection, but all I see is a blanc window.

I think I did something stupid, but is there someone who can help me. My Pi is not feeding for some hours.

Thanks,

[abcd567]

ssh://pi@192.168.xxx.xx

Are you sure of this command? Did you use it before?

I normally use this command ( without :// after ssh)

ssh pi@192.168.xxx.xx

[Dutchyb]

Thank you for the reply.
Yes I always used the //.

I started all over (again) for some reason I could not connect toi my Pi. Installed the Fr24 software on my Pi and use ssh://pi@192.167.xxx.xx, now I can access my Pi and installed the Fr24 feed. Will install Flightaware, Plane plotter as well. Still can figure out why I could not connect. Guess mysteries of my network

[xpro]

Bear in mind that unless you assign your PI with fixed static address, your IP can virtually change every 30min or 5 hr whatever your router is configured to. 192.168.0.45 could be in the morning and then 192.168.0.66 could be in the afternoon..

Also you don't need to blank that IP address as this is your local address only and cannot be accessed from the outside browser

Maybe check that

[Dutchyb]

Thank you for the help. I assigned a fixed IP address to my Pi. To prevent the changing of the IP.
All my devices have a fixed address.